Massey Ferguson 4840 Tractor (1983)
Manufacturer:Massey Ferguson
Price:98,000(USD)
Series:4000 4WD Series
Model:4840
Equipment Type: Four-wheel Drive 4WD Tractors
Factory:
Full Specifications
NEBRASKA TRACTOR TEST 1343 2
- Description
- Diesel 18-speed 4WD April 16 - May 6, 1980 Link: Nebraska Tractor Test 1343 file PTO performance Drawbar performance Gear 2L-L used for power test. Gear 1L-L used for pull test.
- Power at rated engine speed
- 210.67hp / 157.1kW
- Fuel use
- 14.5gal/hour / 54.9l/hour
- Power at rated PTO speed
- 210.61hp / 157.1kW
- Max power
- 179.65hp / 134.0kW
- Max pull
- 28,191lbs / 12787kg
MASSEY FERGUSON 4840 POWER
- Engine (net)
- 265hp / 197.6kW
- Drawbar (claimed)
- 170hp / 126.8kW
- PTO (claimed)
- 211hp / 157.3kW
- Drawbar (tested)
- 179.65hp / 134.0kW
- PTO (tested)
- 210.67hp / 157.1kW
ENGINE DETAIL
- Description
- Cummins V-903 diesel 8-cylinder liquid-cooled
- Displacement
- 903ci / 14.8L
- Bore/Stroke
- 5.50x4.75inches / 140x 121 mm
- Air cleaner
- dual dry elements
- Compression
- 15.5:1
- Starter volts
- 12
- Oil capacity
- 37.5qts / 35.5L
- Coolant capacity
- 60qts / 56.8L
MASSEY FERGUSON 4840 ENGINE
- Description
- Cummins 14.8L 8-cyl diesel
TRANSMISSION
- Type
- partial power shift
- Gears
- 18 forward and 6 reverse
- Clutch
- wet disc with four 14-inch plates
- Oil capacity
- 44qts / 41.6L
- Description
- Three gears (1-3) in two ranges (high/low) with three-speed power shift (low/intermediate/high).
SPEEDS
- Description
- With 23.1x34 duals.
MECHANICAL
- Chassis
- 4x4 articulated 4WD
- Steering
- articulated hydrostatic power
- Brakes
- hydraulic caliper
- Cab
- Cab standard with heat and air-conditioning. Optional AM/FM 8-track stereo.
- Transmission
- 18-speed partial power shift
CAPACITY
- Fuel
- 190gal / 719.1L
- Steering
- 96qts / 90.9L
- Front axle
- 42qts / 39.7L
- Rear axle
- 84qts / 79.5L
HYDRAULICS
- Type
- open center
- Valves
- 3 to 4
- Pump flow
- 16gpm / 60.6lpm (transmission)/16gpm / 60.6lpm (lift)/28gpm / 106.0lpm (auxiliary)
- Total flow
- 60gpm / 227.1lpm
- Steering cap.
- 96qts / 90.9L
TRACTOR HITCH
- Rear Type
- IV
- Control
- position control with electronic lower link sensing
- Rear lift (at 24
- 11,000lbs / 4989kg
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 1000 (1.75)
- Engine RPM
- 1000@2350
MASSEY FERGUSON 4840 TIRES
- Ag front
- 18.4-38
- Ag rear
- 18.4-38/20.8-38/24.5-32/30.5-32
DIMENSIONS
- Wheelbase
- 137inches / 347cm
- Length
- 252inches / 640cm
- Width
- 108inches / 274cm
- Height
- 130inches / 330cm
- Front axle
- 4 inch diameter /101 mm
- Rear axle
- 4 inch diameter /101 mm
MASSEY FERGUSON 4840 WEIGHT
- Shipping
- 27,000lbs / 12247kg
- Operating
- 30,920lbs / 14025kg (23.1-34 duals)
- Max capacity
- 34,000lbs / 15422kg
DIMENSIONS & TIRES
- Wheelbase
- 137inches / 347cm
- Weight
- 27000 to 30920 pounds
- Front tire
- 23.1-34
- Rear tire
- 23.1-34
4840 SERIAL NUMBERS
- Location
- Rear, right-side of cab
- 1978
- 9D001001
- 1979
- 9D001031
- 1980
- 9D002102
- 1981
- 9D002752
- 1982
- 9D003515
- 1983
- 9D003897
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Charging amps
- 60
- Batteries
- 4
- Battery volts
- 12
About Massey Ferguson Tractor
The Massey Ferguson 4840 type tractor is part of the 4000 4WD Series of tractors. The 4840 is classified as a Four-wheel Drive 4WD Tractors and that is primarily used for Agriculture Tractors operations. The 4840 tractor is operated by a engine. This setting improves usability in the real world.
