New Holland T9.480 Tractor (2014)

Manufacturer:New Holland

Price:N/A

Series:T9 Series

Model:T9.480

Equipment Type: Four-wheel Drive 4WD Tractors

Factory:Fargo, North Dakota, USA

Full Specifications

OCED TRACTOR TEST 2093A 2

Description: Diesel 16-speed 4WD September 23 - October 1, 2014 Link: OCED Tractor Test 2093A file PTO performance Drawbar performance Gear 4 used for power test. Gear 1 used for pull test.
Max power: 340.86hp / 254.2kW
Fuel use: 21.4gal/hour / 81.0l/hour
Power at rated engine speed: 367.38hp / 274.0kW
Power at rated PTO speed: 407.49hp / 303.9kW
Max pull: 41762lbs / 18943kg

NEW HOLLAND T9.480 POWER

Engine (gross): 420hp / 313.2kW
Engine (max): 462hp / 344.5kW
PTO (claimed): 355hp / 264.7kW
Drawbar (tested): 340.86hp / 254.2kW
PTO (tested): 413.44hp / 308.3kW

ENGINE DETAIL

Description: FPT Cursor 13 SST wastegate turbocharged aftercooled diesel 6-cylinder 24-valve liquid-cooled
Displacement: 787ci / 12.9L
Bore/Stroke: 5.31x5.91inches / 135x 150 mm
Emissions: Tier IV
Emission control: selective catalytic reduction with diesel oxidation catalyst
Rated Power (ECE R120): 420hp / 313.2kW
Maximum Power (ECE R120): 462hp / 344.5kW
Fuel system: electronic direct-injection high pressure common rail
Cooling system: viscous fan drive
Rated RPM: 2100
Torque: 1469 lb-ft /1992.0 Nm
Torque RPM: 1400
Starter: electric
Starter volts: 12

NEW HOLLAND T9.480 ENGINE

Description: FPT 12.9L 6-cyl diesel
Fuel tank: 230gal / 870.6L
Exhaust fluid (DEF): 42gal / 159.0L

TRANSMISSION

Transmission: Ultra Command
Type: full power shift
Gears: 17 forward and 2 reverse

MECHANICAL

Chassis: 4x4 articulated 4WD
Steering: hydrostatic power articulated
Brakes: wet disc
Trailer brakes: hydraulic
Cab: Cab standard with air-condioning. Optional Comfort Ride cab suspension. ISOBUS compliant/Intelliview IV/IntelliSteer
Transmission: 17-speed full power shift

HYDRAULICS

Type: closed center load sensing (CCLS)
Valves: 4 to 8
Standard Pump flow: 42gpm / 159.0lpm
High-Flow Pump flow: 57gpm / 215.7lpm
MegaFlow Pump flow: 113gpm / 427.7lpm

TRACTOR HITCH

Rear Type: IVN/IIIN
Control: position control
Rear lift (at 24: 20000lbs / 9072kg
Rear Arms: adjustable link ends
Drawbar: Cat. 4

POWER TAKE-OFF (PTO)

Rear PTO: independent
Rear RPM: 1000 (1.75)

NEW HOLLAND T9.480 TIRES

Ag front: 710/70 R42
Ag rear: 710/70 R42

DIMENSIONS

Wheelbase: 148inches / 375cm
Length: 291inches / 739cm
Width: 120inches / 304cm *Minimum
Height (cab): 151.3inches / 384cm
Shiping weight: 36048lbs / 16351kg
Max weight: 49500lbs / 22453kg
Front axle: Bar: 5.0 by 120inches / 127by 3048 mm
Rear axle: Bar: 5.0 by 120inches / 127by 3048 mm

DIMENSIONS & TIRES

Wheelbase: 148inches / 375cm
Weight: 36048lbs / 16351kg
Front tire: 710/70
Rear tire: 710/70

T9.480 SERIAL NUMBERS

2014: ZDFxxxxxx
2015: ZEFxxxxxx
2016: ZFFxxxxxx
2017: ZGFxxxxxx
2018: ZHFxxxxxx
2019: ZJFxxxxxx
2020: ZKFxxxxxx
2021: ZLFxxxxxx

ELECTRICAL

Ground: negative
Charging system: alternator
Charging amps: 200
Batteries: 2
Battery CCA: 1000
Battery volts: 12

About New Holland Tractor

The T9.480 model tractor belongs to the New Holland T9 Series. The T9.480 is a type of Four-wheel Drive 4WD Tractors and is majorly used for Agriculture Tractors activities. The engine of the T9.480 tractors is impressive. This configuration gives better real-world usability.