New Holland Workmaster 40 Tractor (2017)

new holland workmaster 40 specifications

Manufacturer:New Holland

Price:22,187(USD)

Series:Workmaster Series

Model:Workmaster 40

Equipment Type: Compact Utility Tractors

Factory:

Full Specifications

NEW HOLLAND WORKMASTER 40 POWER

Engine: 40hp / 29.8kW
Gear PTO (claimed): 34hp / 25.4kW
Hydro PTO (claimed): 32hp / 23.9kW

ENGINE DETAIL

Description: LS Mitron L3C19-T turbocharged diesel 3-cylinderliquid-cooled
Displacement: 114.7ci / 1.9L
Bore/Stroke: 3.465x4.055inches / 88x 103 mm
Emissions: Tier IV
Emission control: exhaust gas recirculation with particulate catalyst
Power: 40hp / 29.8kW
Fuel system: electronic common rail direct injection
Pre-heating: glow plugs
Rated RPM: 2600
Starter: electric
Starter volts: 12

NEW HOLLAND WORKMASTER 40 ENGINE

Description: LS Mitron 1.9L 3-cyl diesel
Fuel tank: 7.4gal / 28.0L

TRANSMISSIONS OVERVIEW

Description: 12-speed synchronized shuttle hydrostatic

TRANSMISSION 1

Type: synchronized shuttle
Gears: 12 forward and reverse
Description: Four gears in three ranges with mechanical shuttle

TRANSMISSION 2

Type: hydrostatic
Gears: infinite (3-range) forward and reverse

MECHANICAL

Chassis: 4x4 MFWD 4WD
Differential lock: mechanical rear
Steering: power
Brakes: wet disc
Cab: Two-post folding ROPS.
Transmissions: 12-speed synchronized shuttle hydrostatic

HYDRAULICS

Type: open center
Valves: 1 or 2
Pump flow: 8.2gpm / 31.0lpm
Gear Total flow: 12.4gpm / 46.9lpm
Hydro Total flow: 13.5gpm / 51.1lpm
Gear Steering flow: 4.2gpm / 15.9lpm
Hydro Steering flow: 5.3gpm / 20.1lpm

TRACTOR HITCH

Rear Type: I
Control: position control
Rear lift (at ends): 1808lbs / 820kg
Rear lift (at 24: 1433lbs / 650kg

POWER TAKE-OFF (PTO)

Rear PTO: independent
Clutch: electro-hydraulic
Rear RPM: 540 (1.375)

NEW HOLLAND WORKMASTER 40 TIRES

Standard tires (ag): Front: 7x14. Rear: 11.2x24
Lawn/turf front: 25x8.50-14
Lawn/turf rear: 41x14.00-20
Industrial front: 25x8.5-14
Industrial rear: 43x16.00-20

DIMENSIONS

Wheelbase: 67.5inches / 171cm
Length: 121inches / 307cm
Width: 66.5inches / 168cm
Height (ROPS): 87.7inches / 222cm
Weight: 3067lbs / 1391kg
Rear axle: Flange
Front tread: 45.6inches / 115cm
Rear tread: 50.5inches / 128cm

DIMENSIONS & TIRES

Wheelbase: 67.5inches / 171cm
Weight: 3067lbs / 1391kg
Front tire: 7x14
Rear tire: 11.2x24

ATTACHMENT OVERVIEW

Description: Mid-mount mower deck Snowblower Blade Front-end loader Backhoe

MOWER DECK

Type: mid-mount New Holland 366GMS

BLADE

Type: front-mount New Holland 72CHB
Width: 72inches / 182cm

63

Type: front-mount New Holland 63CSBA
Clearing width: 63inches / 160cm

SNOW BLOWER

Type: front-mount New Holland 74SCHA

NEW HOLLAND 140TL LOADER

Description: A reader reports the manual lists different performance data than the sales catalog. The manual lists 1,259 pounds to full height at the pin and 859 pounds at 500mm.
Height (to pin): 91.5inches / 232cm
Dump angle: 48°
Rollback angle: 30.4°
Breakout force (at pin): 2700lbs / 1224kg
Breakout force (at 500mm): 1900lbs / 861kg
Lift to full height (at pin): 1500lbs / 680kg
Lift to full height (at 500mm): 1100lbs / 498kg

NEW HOLLAND 925GHB BACKHOE

Backhoe type: New Holland 925GHB Backhoe
Weight: 722lbs / 327kg
Transport height: 77inches / 195cm
Digging depth: 92inches / 233cm
Reach from pivot: 120inches / 304cm
Loading height: 70inches / 177cm
Bucket Rotation: 174
Swing Arc: 175
Bucket force: 3151lbs / 1429kg
Dipperstick force: 2059lbs / 933kg

ELECTRICAL

Ground: negative
Charging system: alternator
Charging amps: 70
Battery volts: 12

About New Holland Tractor

The Workmaster 40 model tractor belongs to the Workmaster Series of tractors from New Holland. The Workmaster 40 is a Compact Utility Tractors type, that is used mostly in the Agriculture Tractors. A engine powers the Workmaster 40 tractor. This configuration offers better real-world usability.