Oliver 1855 Tractor (1975)

Manufacturer:Oliver

Price:13,000(USD)

Series:55 Series

Model:1855

Equipment Type: Row-Crop Tractors

Factory:

Full Specifications

NEBRASKA TRACTOR TEST 1040 2

Description: Diesel 18-speed 2WD May 5 - 22, 1970 Link: Nebraska Tractor Test 1040 file PTO performance Drawbar performance Gear 3-direct used for power test Gear 1-over used for pull test
Power at rated engine speed: 98.60hp / 73.5kW
Fuel use: 6.0gal/hour / 22.7l/hour
Max power: 82.65hp / 61.6kW
Max pull: 11,487lbs / 5210kg

OLIVER 1855 POWER

PTO (claimed): 92hp / 68.6kW (gas)/98hp / 73.1kW (diesel)
Drawbar (tested): 82.65hp / 61.6kW
PTO (tested): 98.60hp / 73.5kW

ENGINES OVERVIEW

Description: Oliver-Waukesha 5.1L 6-cyl diesel/Oliver-Waukesha 5.1L 6-cyl gasoline

ENGINE DETAIL 1

Description: Oliver-Waukesha turbocharged diesel 6-cylinder liquid-cooled
Displacement: 310ci / 5.1L
Bore/Stroke: 3.875x4.375inches / 98x 111 mm
Air cleaner: dry
Compression: 16:1
Rated RPM: 2400
Starter volts: 12
Coolant capacity: 20qts / 18.9L

ENGINE DETAIL 2

Description: Oliver-Waukesha gasoline 6-cylinder liquid-cooled
Displacement: 310ci / 5.1L
Bore/Stroke: 3.875x4.375inches / 98x 111 mm
Air cleaner: dry
Compression: 8.5:1
Rated RPM: 2400

OLIVER 1855 ENGINES

Description: Oliver-Waukesha 5.1L 6-cyl diesel/Oliver-Waukesha 5.1L 6-cyl gasoline
Fuel tank: 35gal / 132.5L

TRANSMISSIONS OVERVIEW

Description: 6-speed gear 18-speed partial power shift

TRANSMISSION 1

Type: gear
Gears: 6 forward and 2 reverse
Clutch: 330mm cerametallic disc

SPEEDS 1

Description: With 18.4-34 rear tires

TRANSMISSION 2

Transmission: Hydraul-Shift
Type: partial power shift
Gears: 18 forward and 6 reverse
Clutch: 330mm cerametallic disc
Description: The Hydraul-Shift overs a power shift between over-, under-, and direct-drive for each gear.

SPEEDS 2

Description: With 18.4-34 rear tires

MECHANICAL

Chassis: 4x2 2WD/4x4 MFWD 4WD
Steering: power
Brakes: differential hydraulic disc
Cab: Open operator station. Optional two-post ROPS and cab.
Transmissions: 6-speed gear/18-speed partial power shift

HYDRAULICS

Type: closed center
Pump flow: 20gpm / 75.7lpm

TRACTOR HITCH

Rear Type: I/II/II/III (optional)
Rear lift: 4,000lbs / 1814kg/6,000lbs / 2721kg (Cat 3)

POWER TAKE-OFF (PTO)

Rear PTO: independent
Rear RPM: 540/540/1000/1000
Engine RPM: 984@2400

OLIVER 1855 TIRES

Ag front: 11L-15
Ag rear: 23.1-34

DIMENSIONS

2WD Wheelbase: 103inches / 261cm
4WD Wheelbase: 86.25inches / 219cm
2WD Length: 159.5inches / 405cm
4WD Length: 152.375inches / 387cm
Width: 80.625inches / 204cm *Minimum width
Height (steering wheel): 85.5inches / 217cm
Weight: 11,150lbs / 5057kg
2WD Ground clearance: 25.5inches / 64cm
4WD Ground clearance: 13.5inches / 34cm
2WD Front tread: 61.5 to 87.5inches / 156to 222 cm
4WD Front tread: 60/70.75/80inches / 152/179/203 cm
Rear tread: 57 to 119.5inches / 144to 303 cm

DIMENSIONS & TIRES

2WD Wheelbase: 103inches / 261cm
4WD Wheelbase: 86.25inches / 219cm
Weight: 11,150lbs / 5057kg
Front tire: 11L-15
Rear tire: 23.1-34

1855 SERIAL NUMBERS

1969: 220-640
1970: 221-099
1971: 225-508
1972: 231-366
1973: 236-585
1974: 247-436
1975: 255-727
Final: 255-785

About Oliver Tractor

The 1855 model tractor is part of Oliver's 9R line of tractors. The 1855 is a kind of Row-Crop Tractors and that is primarily used for Agriculture Tractors applications. The 1855 tractor has a engine. This setup offers a broader usability in the actual world.