Steiger Panther III ST-325 Tractor (1983)
Manufacturer:Steiger
Price:103,000(USD)
Series:III Series
Model:Panther III ST-325
Equipment Type: Four-wheel Drive 4WD Tractors
Factory:Fargo, North Dakota, USA
Full Specifications
NEBRASKA TRACTOR TEST 1236
- Description
- Diesel 10-speed 4WD April 11 - May 2, 1977 Link: Nebraska Tractor Test 1236 file Drawbar performance Gear 5 used for power test Gear 2 used for pull test
- Max power
- 269.86hp / 201.2kW
- Fuel use
- 18.2gal/hour / 68.9l/hour
- Max pull
- 28,189lbs / 12786kg
STEIGER PANTHER III ST-325 POWER
- Engine
- 325hp / 242.4kW
- Drawbar (tested)
- 269.86hp / 201.2kW
ENGINE DETAIL
- Description
- Caterpillar 3406DIT turbocharged diesel 6-cylinder liquid-cooled inline
- Displacement
- 893ci / 14.6L
- Bore/Stroke
- 5.40x6.50inches / 137x 165mm
- Power
- 325hp / 242.4kW
- Compression
- 14.5:1
- Rated RPM
- 2100
- Torque
- 1015lb-ft / 1376.3Nm
- Torque RPM
- 1200
- Starter volts
- 12
- Oil capacity
- 36qts / 34.1L
- Coolant capacity
- 70qts / 66.2L
STEIGER PANTHER III ST-325 ENGINE
- Description
- Caterpillar 14.6L 6-cyl diesel
- Fuel tank
- 267gal / 1010.6L
TRANSMISSIONS OVERVIEW
- Description
- 10-speed 20-speed
TRANSMISSION 1
- Gears
- 10 forward and 2 reverse
- Clutch
- hydraulic dry discs
TRANSMISSION 2
- Transmission
- Dana-Spicer 1010-3B
- Gears
- 20 forward and 4 reverse
- Clutch
- 393.7mm dry disc
- Description
- Ten-speed transmission with two-speed transfer case
MECHANICAL
- Chassis
- 4x4 articulated 4WD
- Final drives
- outboard planetary
- Steering
- hydrostatic power
- Brakes
- hydraulic disc
- Cab
- Safari Cab standard with heat and air-conditioning
- Transmissions
- 10-speed 20-speed
HYDRAULICS
- Type
- open center
- Pressure
- 2250psi / 155.1bar
- Valves
- 3 to 5
- Pump flow
- 31.9gpm / 120.7lpm
TRACTOR HITCH
- Rear Type
- 3
STEIGER PANTHER III ST-325 TIRES
- Ag front
- 23.1-34
- Ag rear
- 23.1-34
DIMENSIONS
- Wheelbase
- 128inches / 325cm
- Length
- 252inches / 640cm
- Width
- 96inches / 243cm (tractor body)
- Height (exhaust)
- 155.8inches / 395cm
- Shiping weight
- 26,900lbs / 12201kg
- Max weight
- 34,000lbs / 15422kg
- Clearance (rear axle)
- 20inches / 50cm
DIMENSIONS & TIRES
- Wheelbase
- 128inches / 325cm
- Weight
- 26,900lbs / 12201kg
- Front tire
- 23.1-34
- Rear tire
- 23.1-34
PANTHER III ST-325 SERIAL NUMBERS
- 1976
- 123-00001
- 1977
- 123-00123
- 1978
- 123-00370
- 1979
- 123-00627
- 1980
- 123-00887
- 1981
- 123-01124
- 1982
- 123-01501
- 1983
- 123-02501
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Charging amps
- 90
- Batteries
- 2
- Battery volts
- 12
- Battery AH
- 208
- Battery Group
- 8D
About Steiger Tractor
The Panther III ST-325 tractor is part of the Steiger's III Series. The Panther III ST-325 is a Four-wheel Drive 4WD Tractors type, which is used mainly in Agriculture Tractors. The Panther III ST-325 tractor has a engine. This configuration enhances real-world efficiency.
