Valmet 802 Tractor (1983)
Full Specifications
VALMET 802 POWER
- Engine
- 80.5hp / 60.0kW
- PTO (claimed)
- 76.4hp / 57.0kW
ENGINE DETAIL
- Description
- Valmet 411 CS turbocharged diesel 4-cylinder liquid-cooled
- Displacement
- 268.5ci / 4.4L
- Bore/Stroke
- 4.25x4.72inches / 108x 120 mm
- Power
- 80.5hp / 60.0kW
- Rated RPM
- 2200
- Torque
- 225.7 lb-ft /306.0 Nm
- Torque RPM
- 1450
- Starter
- electric
- Starter volts
- 12
- Oil capacity
- 13.7qts / 13.0L
- Coolant capacity
- 16.9qts / 16.0L
VALMET 802 ENGINE
- Description
- Valmet 4.4L 4-cyl diesel
TRANSMISSION
- Type
- synchromesh
- Gears
- 8 forward and 2 reverse
- Clutch
- 310mm disc
- Description
- Four gears (1-4) plus reverse (R) in two ranges (low/high).
SPEEDS
- Description
- With 16.9-34 rear tires
MECHANICAL
- Chassis
- 4x2 2WD/4x4 MFWD 4WD
- Differential lock
- mechanical rear
- Steering
- power
- Brakes
- disc
- Cab
- Cab standard with heater
- Transmission
- 8-speed synchromesh
CAPACITY
- Fuel
- 23.8gal / 90.1L
- Hydraulic system
- 6.1gal / 23.1L
HYDRAULICS
- Capacity
- 6.1gal / 23.1L
- Pressure
- 3046psi / 210.0bar
- Pump flow
- 9.2gpm / 34.8lpm
TRACTOR HITCH
- Rear lift
- 6393lbs / 2899kg
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 540 (1.375)
- Engine RPM
- 540@1556
VALMET 802 TIRES
- 2WD Standard tires (ag)
- Front: 10.00-16. Rear: 16.9-34
- 4WD Standard tires (ag)
- Front: 13.6-28. Rear: 18.4-34
DIMENSIONS
- 2WD Wheelbase
- 92.1inches / 233cm
- 4WD Wheelbase
- 96.3inches / 244cm
- 2WD Length
- 151.2inches / 384cm
- 4WD Length
- 163.4inches / 415cm
- 2WD Width
- 77.6inches / 197cm
- 4WD Width
- 83.1inches / 211cm
- 2WD Weight
- 7804lbs / 3539kg
- 4WD Weight
- 8730lbs / 3959kg
- 2WD Ground clearance
- 18.9inches / 48cm
- 4WD Ground clearance
- 18.5inches / 46cm
VALMET 802 HEIGHT
- 2WD Cab
- 98.4inches / 249cm
- 4WD Cab
- 103.2inches / 262cm
- 2WD Exhaust
- 104.3inches / 264cm
- 4WD Exhaust
- 106.3inches / 270cm
DIMENSIONS & TIRES
- 2WD Wheelbase
- 92.1inches / 233cm
- 4WD Wheelbase
- 96.3inches / 244cm
- Weight
- 7804 to 8730 pounds
- Front tire
- 10.00-16
- 2WD Rear tire
- 16.9-34
VALMET J 71 LOADER
- Height (to pin)
- 141.7inches / 359cm
- Clearance, dumped bucket
- 111.4inches / 282cm
- Dump reach
- 31.5inches / 80cm
- Dump angle
- 40°
- Breakout force (bucket)
- 6969lbs / 3161kg
- Lift to full height (at pin)
- 4721lbs / 2141kg
ELECTRICAL
- Ground
- negative
- Battery volts
- 12
- Battery AH
- 130
About Valmet Tractor
The Valmet 802 tractor is part of the company's 02 Series. The 802 is classified as a Row-Crop Tractors and is majorly used for Agriculture Tractors applications. The 802 tractor is powered by a engine. This setup offers a enhanced usability in the actual world.
