Full Specifications
KEY SPECS
Engine description
John Deere PowerTech™ 13.6L (B20 diesel compatible)
Engine displacement
13.6 L827 cu in.
Rated engine power
382 kW520 hp
Maximum engine power
421 kW572 hp
Rated PTO power (hp SAE)
245 kW329 hp
Transmission type
John Deere e18™ 18-speed PowerShift™ with Efficiency Manager™: 40 km/h25 mph
Hydraulic pump rated output
Standard: 208 L/min55 gpmOptional: 416 L/min110 gpm
Rear hitch category (SAE designation)
Category 4N/N: 6804 kg15,000 lbCategory 4N/N: 9072 kg20,000 lb"
Base machine weight
20,582 kg45,375 lb"
ENGINE SPECIFICATIONS
Description
John Deere PowerTech 13.6L (B20 diesel compatible)
Engine type
Diesel, inline, 6-cylinder, wet-sleeve cylinder liners with four valves in-head"
Rated speed
2100 rpm
Aspiration
Dual series turbocharger with fixed geometry first stage and wastegated second stage; air-to-air aftercooling and cooled exhaust gas recirculation (EGR)
Emission level
Final Tier 4 (FT4)
After treatment type
Diesel oxidation catalyst (DOC)/selective catalytic reduction (SCR)
Displacement
13.6 L827 cu in.
ENGINE PERFORMANCE
Rated power
382 kW520 hp
Rated PTO power (hp SAE)
245 kW329 hp
Power boost
10 percent
Maximum engine power
421 kW572 hp
Engine peak torque
At 1600 rpm: 2400 Nm 1770 lb-ft
PTO torque rise
38 percent
TRANSMISSION
Type
John Deere e18 18-speed PowerShift with Efficiency Manager: 40 km/h25 mph
HYDRAULIC SYSTEM
Type
Closed-center, pressure-and-flow compensated"
Pump rated output
Standard: 208 L/min55 gpmOptional: 416 L/min110 gpm
Available flow at a single rear SCV
1.3-cm (1/2-in.) couplers: 132 L/min35 gpm1.9-cm (3/4-in.) couplers: 159 L/min42 gpm
Number of rear selective control valves (SCVs)
Four to eight factory or field installedBase: four 1.3-cm (1/2-in.) couplersOptional: five to six 1.3-cm (1/2-in.) couplers factory installedOptional: three 1.9-cm (3/4-in.) couplers plus five 1.3-cm (1/2-in.) couplers factory installed
SCV control
Electronic
REAR HITCH
Hitch category (SAE designation)
Category 4N/N: 6804 kg15,000 lbCategory 4N/N: 9072 kg20,000 lb"
Maximum lift capacity behind lift points
Category 4N/4: 9072 kg20,000 lb"
Sensing type
Electrohydraulic with draft sensing
DRAWBAR
Drawbar category
Standard: Category 5 with heavy-duty drawbar supportOptional: Category 5
Maximum vertical load
5440 kg12,000 lb"
REAR POWER TAKE-OFF (PTO)
Type
Independent44 mm (1.75 in.) 20-spline, 1000 rpm"
PTO actuation
Electrohydraulic
REAR AXLE
Final drive type
Outboard planetary
TRACKS
Drive type
Camso® 4500 and 6500 General Ag Series - friction drive track belts
Track width
Standard: 762 mm30 in.Optional: 914 mm36 in.
Midrollers
Four
STEERING
Type
Heavy-duty steering pump: 130 cc7.9 cu in.
ELECTRICAL SYSTEM
Alternator size
Standard: 250 ampOptional: 330 amp
Battery options
12 V
Working lights
Standard: 18 halogenOptional: 18 or 24 LED plus 8 LED conveninence lights
Type of bulb in headlight (Halogen, Zenon, LED)
Standard: halogen, 65 WOptional: LED"
Total cold cranking amps
3 x 925 CCATotal: 2775 CCA
OPERATOR STATION
Seat
Degree of seat swivel, left hand25 degree (angle)Degree of seat swivel, right hand40 degree (angle)Air suspension"
Instructional seat
Standard
Display
Standard: Generation 4 4600 CommandCenter™: 25.4 cm10 in.Optional: Extended monitor
Radio
Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antennaOptional: Touchscreen radio"
Inner cab volume
3.27 m3115 cu ft
Cab glass area
6.64 m271.47 sq ft
DIMENSIONS
Wheelbase
2947 mm116 in.
Overall length
With front weights, excluding hitch and coupler: 6965 mm274.2 in.With front weights, including hitch and coupler: 7201 mm283.5 in."
Drawbar clearance
381 mm15 in.
Approximate shipping weight, Open;Cab
20,582 kg45,375 lb"
WEIGHT
Base machine weight
20,582 kg45,375 lb"
Maximum ballast level
24,494 kg54,000 lb"
CAPACITIES
Crankcase oil volume
64 L16.9 U.S. gal.
Fuel tank
1324 L350 U.S. gal.
Diesel exhaust fluid (DEF) tank
93.9 L24.8 U.S. gal.
Cooling system
56.5 L14.9 U.S. gal.
Transmission-hydraulic system
With 3-point hitch and PTO: 307.8 L81.3 U.S. gal.Without 3-point hitch and PTO: 300 L79.3 U.S. gal.
SERVICEABILITY
Interval for engine oil change
500 hours
Interval for hydraulic/transmission oil change
1500 hours
Interval for engine coolant change
6000 hours
PRECISION AG
Guidance
Integrated AutoTrac™
Telematic
Available with JDLink™ hardware, activations, and Ethernet harnesses (availability dependent upon destination)"
Remote diagnostics
Available with activated JDLink hardware and activations
MISCELLANEOUS
Country of manufacture
USA
ADDITIONAL INFORMATION
Date collected
1 March 2021
.png)
