Full Specifications
NEBRASKA TRACTOR TEST 223
Description
Distillate 201 4-speed 2WD May 2 - 16, 1934 Link: Nebraska Tractor Test 223 file Drawbar performance Gear 2 (steel); 4 (rubber) used for power test
Belt power (max)
21.48hp / 16.0kW
Belt fuel use (max)
2.1gal/hour / 7.9l/hour
Max power
14.36hp / 10.7kW (steel)/19.17hp / 14.3kW (rubber)
Max pull
1,921lbs / 871kg (steel)/1,735lbs / 786kg (rubber)
NEBRASKA TRACTOR TEST 303
Description
Distillate 201 4-speed 2WD May 31 - June 14, 1938 Link: Nebraska Tractor Test 303 file Drawbar performance Gear 1 used for pull test
Belt power (max)
25.45hp / 19.0kW
Belt fuel use (max)
2.6gal/hour / 9.8l/hour
Max power
18.72hp / 14.0kW (steel)/20.41hp / 15.2kW (rubber)
Max pull
2,599lbs / 1178kg (steel)/3,054lbs / 1385kg (rubber)
ALLIS CHALMERS WC POWER
Drawbar (claimed)
12hp / 8.9kW
Belt (claimed)
21hp / 15.7kW
Plows
2
Drawbar (tested)
18.72hp / 14.0kW
Belt (tested)
25.45hp / 19.0kW
ENGINES OVERVIEW
Description
Waukesha 3.0L 4-cyl gasoline Allis-Chalmers 3.3L 4-cyl distillate Allis-Chalmers 3.3L 4-cyl gasoline
ENGINE DETAIL 1
Description
Waukesha gasoline 4-cylinder liquid-cooled Used on first 25 tractors built
Displacement
186ci / 3.0L
Bore/Stroke
3.625x4.50inches / 92x 114 mm
Starter type
manual crank
ENGINE DETAIL 2
Description
Allis-Chalmers distillate 4-cylinder liquid-cooled vertical I-head Low-compression engine designed to operate on fuels rated at 30 octane or higher.
Displacement
201ci / 3.3L
Bore/Stroke
4.00x4.00inches / 102x 102 mm
Fuel use
2.119gal/hour / 8.0l/hour
Air cleaner
oil bath
Compression
4.2:1
Rated RPM
1300
Firing order
1-2-4-3
Starter type
manual crank/electric
Coolant capacity
14qts / 13.2L
Sparkplug gap
0.030inches / 0.762 mm
Point gap
0.020inches / 0.508 mm
Intake valve clearance
0.010inches / 0.254 mm (hot)
Exhaust valve clearance
0.010inches / 0.254 mm (hot)
ENGINE OIL 1
Oil capacity
6 qts /5.7 L
ENGINE DETAIL 3
Description
Allis-Chalmers gasoline 4-cylinder liquid-cooled vertical I-head
Displacement
201ci / 3.3L
Bore/Stroke
4.00x4.00inches / 102x 102 mm
Fuel use
2.861gal/hour / 10.8l/hour
Air cleaner
oil bath
Compression
5.0:1
Rated RPM
1300
Firing order
1-2-4-3
Starter type
manual crank/electric
Coolant capacity
14qts / 13.2L
Sparkplug gap
0.030inches / 0.762 mm
Point gap
0.020inches / 0.508 mm
Intake valve clearance
0.010inches / 0.254 mm (hot)
Exhaust valve clearance
0.010inches / 0.254 mm (hot)
ENGINE OIL 2
Oil capacity
6 qts /5.7 L
ALLIS CHALMERS WC ENGINES
Description
Waukesha 3.0L 4-cyl gasoline Allis-Chalmers 3.3L 4-cyl distillate Allis-Chalmers 3.3L 4-cyl gasoline
Fuel tank
15gal / 56.8L
Aux. fuel
1 gal /3.8 L
TRANSMISSION
Type
non-synchronized gear
Gears
4 forward and 1 reverse
Oil capacity
4 qts /3.8 L/5 qts /4.7 L (with PTO)
32oF [0oC]
: SAE90
Description
Operated via gearshift lever and foot clutch. Fourth gear was not recommended for tractors equipped with steel wheels.
MECHANICAL
Chassis
4x2 2WD
Steering
manual
Brakes
differential hand-operated mechanical drum
Cab
Open operator station with steel pan seat.
Transmission
4-speed non-synchronized gear
POWER TAKE-OFF (PTO)
Rear PTO
transmission
Rear RPM
535
ALLIS CHALMERS WC TIRES
Ag front
5.25-17
Ag rear
11.25x24
DIMENSIONS
Length
136inches / 345cm
Width
76inches / 193cm
Height
63inches / 160cm
Ground clearance
29inches / 73cm (rear axle)
Rear tread
65 to 76inches / 165to 193 cm
ALLIS CHALMERS WC WEIGHT
Shipping
2,700lbs / 1224kg (steel)/3,300lbs / 1496kg (rubber)
Operating
3,190lbs / 1446kg (steel)/3,792lbs / 1720kg (rubber)
Ballasted
4,545lbs / 2061kg
DIMENSIONS & TIRES
Weight
2700 to 3792 pounds
Front tire
24x4
Rear tire
40x6
WC SERIAL NUMBERS
Location
Serial number is on the rear of the Allis-Chalmers WC, stamped into the differential housing.
1933
1
1934
29
1935
3127
1936
13870
1937
31784
1938
60790
1939
75216
1940
91534
1941
103517
1942
114534
1943
123171
1944
127642
1945
134624
1946
148091
1947
152845
1948
170174
Final
178202
BELT PULLEY
Diameter
9 inches /22 cm
Width
6.5inches / 16cm
RPM
1170
ELECTRICAL
Charging system
generator
Battery volts
6
Battery AH
95