CaseIH Farmall 120C Tractor (2015)

Manufacturer:CaseIH

Price:82,837(USD)

Series:Farmall C Series

Model:Farmall 120C

Equipment Type: Utility Tractors

Factory:

Full Specifications

OCED TRACTOR TEST 3008 2

Description: Diesel 12-speed 4WD April 2016 - 2016, Link: OCED Tractor Test 3008 file PTO performance Drawbar performance Gear 4M used for power test Gear 3M used for pull test
Max power: 76hp / 56.7kW
Fuel use: 5.7gal/hour / 21.6l/hour
Power at rated engine speed: 100.3hp / 74.8kW
Power at rated PTO speed: 106.1hp / 79.1kW
Max pull: 6910lbs / 3134kg

CASEIH FARMALL 120C POWER

Engine: 117hp / 87.2kW
PTO (claimed): 99hp / 73.8kW
Drawbar (tested): 76hp / 56.7kW
PTO (tested): 106.1hp / 79.1kW

ENGINE DETAIL

Description: Fiat Powertrain Technologies (FPT)/wastegate turbocharged and aftercooled/4-cylinder/liquid-cooled
Displacement: 207ci / 3.4L
Bore/Stroke: 3.90x4.33inches / 99x 110mm
Emissions: Tier 4
Emission control: selective catalytic reduction (SCR) with cooled exhaust-gas recirculation
Power: 117hp / 87.2kW
Fuel system: high pressure common rail electronic direct injection
Starter: electric
Starter volts: 12

CASEIH FARMALL 120C ENGINE

Description: Fiat Powertrain Technologies (FPT) 3.4L 4-cyl
Fuel tank: 30.3gal / 114.7L
Exhaust fluid (DEF): 2.8gal / 10.6L

TRANSMISSIONS OVERVIEW

Description: 12-speed mechanical shuttle 12-speed power shuttle 24-speed

TRANSMISSION 1

Type: mechanical shuttle
Gears: 12 forward and reverse
Description: Four synchronized gears in three non-synchronized ranges with mechanical shuttle shift

TRANSMISSION 2

Type: power shuttle
Gears: 12 forward and reverse
Description: Four synchronized gears in three non-synchronized ranges with power shuttle shift

TRANSMISSION 3

Gears: 24 forward and reverse
Description: Four synchronized gears in three non-synchronized ranges with power shuttle shift and two-speed high-low shift

MECHANICAL

Chassis: 4x2 2WD/4x4 MFWD 4WD
Final drives: inboard planetary
Steering: power
Brakes: wet disc
Cab: Two-post ROPS. Cab optional with air-conditioning
Transmissions: 12-speed mechanical shuttle 12-speed power shuttle 24-speed

HYDRAULICS

Type: open center
Valves: 2 or 3
Pump flow: 16..9gpm / 60.6lpm

TRACTOR HITCH

Rear Type: II/I
Control: top link draft sensing
Rear lift (at 24: 4339lbs / 1968kg 5620lbs / 2549kg
Rear Arms: telescopic link ends
Drawbar: swinging extendable drawbar

POWER TAKE-OFF (PTO)

Rear PTO: independent
Rear RPM: 540/540E/540/1000

CASEIH FARMALL 120C TIRES

2WD Standard tires (ag): Front: 7.50x16. Rear: 16.9R30
4WD Standard tires (ag): Front: 14.9R24. Rear: 18.4R34

DIMENSIONS

2WD Wheelbase: 92.2inches / 234cm
4WD Wheelbase: 90inches / 228cm
2WD Length: 163.1inches / 414cm
4WD Length: 160.1inches / 406cm
Width: 75.7inches / 192cm
Height (ROPS): 106.5inches / 270cm
Height (cab): 102.1inches / 259cm
Rear axle: Flange

CASEIH FARMALL 120C WEIGHT

2WD ROPS: 6989lbs / 3170kg
4WD ROPS: 7672lbs / 3480kg
2WD Cab: 7474lbs / 3390kg
4WD Cab: 8157lbs / 3700kg

DIMENSIONS & TIRES

2WD Wheelbase: 92.2inches / 234cm
4WD Wheelbase: 90inches / 228cm
Weight: 6989 to 8157 pounds
Front tire: 7.50x16
2WD Rear tire: 16.9R30

CASE IH L575 LOADER

Breakout force (at pin): 4730lbs / 2145kg
Breakout force (bucket): 3058lbs / 1387kg
Lift to full height (at pin): 1782lbs / 808kg

CASE IH L735 LOADER

Breakout force (at pin): 4960lbs / 2249kg
Lift to full height (at pin): 4034lbs / 1829kg
Raise time to height: 2.4 s

ELECTRICAL

Ground: negative
Charging system: alternator
Battery volts: 12

About CaseIH Tractor

The Farmall 120C model tractor belongs to the Farmall C Series of tractors from CaseIH. The Farmall 120C is a Utility Tractors type, which is used mostly in the Agriculture Tractors. The engine of the Farmall 120C tractor delivers. This setup more usage in the actual world.