CaseIH Farmall 50 Tractor (2011)

Manufacturer:CaseIH

Price:40,856(USD)

Series:Farmall Compact Series

Model:Farmall 50

Equipment Type: Compact Utility Tractors

Factory:Dublin, Georgia, USA

Full Specifications

NEBRASKA TRACTOR TEST 1938A 2

Description: Diesel 12-speed 4WD December 2 - 3, 2008 Link: Nebraska Tractor Test 1938A file PTO performance
Max power: 44.64hp / 33.3kW
Fuel use: 4.0gal/hour / 15.1l/hour
Power at rated engine speed: 43.62hp / 32.5kW
Power at rated PTO speed: 41.54hp / 31.0kW

CASEIH FARMALL 50 POWER

Engine (gross): 50hp / 37.3kW
PTO (claimed): 40.0hp / 29.8kW (CVT) 43.0hp / 32.1kW (shuttle)
PTO (tested): 44.64hp / 33.3kW

ENGINE DETAIL

Description: Shibaura N844L diesel 4-cylinder liquid-cooled
Displacement: 135.2ci / 2.2L
Bore/Stroke: 3.307x3.937inches / 84x 100mm
Power (gross): 50hp / 37.3kW
Air cleaner: dual element
Pre-heating: glow plugs
Compression: 22.4:1
Rated RPM: 2800
Starter volts: 12

CASEIH FARMALL 50 ENGINE

Description: Shibaura 2.2L 4-cyl diesel
Fuel tank: 13gal / 49.2L

TRANSMISSIONS OVERVIEW

Description: 12-speed continuously variable transmission

TRANSMISSION 1

Transmission: Synchro Shuttle
Gears: 12 forward and reverse
Clutch: dry disc
Description: Four synchronized gears in three ranges

TRANSMISSION 2

Transmission: CVT
Type: continuously variable transmission
Gears: infinite forward and reverse
Description: The mechanical CVT uses a steel chain between variable-diameter pulleys. Three speed modes (low, medium, high) with variable reactivity. Left-hand shuttle lever

MECHANICAL

Chassis: 4x4 MFWD 4WD
Steering: hydrostatic power
Brakes: wet disc
Cab: Two-post foldable ROPS. Cab with air-conditioning standard on CVT-equipped tractor
Transmissions: 12-speed continuously variable transmission

HYDRAULICS

Pump flow: 9.8gpm / 37.1lpm
Total flow: 14.9gpm / 56.4lpm
Steering flow: 5.1gpm / 19.3lpm

TRACTOR HITCH

Rear Type: I
Control: position control
Rear lift (at 24: 2,330lbs / 1056kg 2,800lbs / 1270kg (CVT)

POWER TAKE-OFF (PTO)

Rear PTO: independent
Rear RPM: 540
Mid PTO: optional with CVT
Mid RPM: 2000

CASEIH FARMALL 50 TIRES

Ag front: 8-16
Ag rear: 14.9-24
Lawn/turf front: 27x10.50-15/27/12LLx15
Lawn/turf rear: 44x18-20/22.5LLx16.1
Industrial front: 10-16.5
Industrial rear: 17.5x24

DIMENSIONS

Wheelbase: 73.5inches / 186cm
Length: 125.2inches / 318cm
Width: 66.6inches / 169cm (min)
Height (ROPS): 95inches / 241cm
Height (cab): 90.79inches / 230cm
Shiping weight: 3,522lbs / 1597kg (ROPS shuttle)/4,136lbs / 1876kg (CVT cab)
Clearance (drawbar): 12.3inches / 31cm
Front tread: 49.3inches / 125cm
Rear tread: 51.2 to 67.4inches / 130to 171cm

DIMENSIONS & TIRES

Wheelbase: 73.5inches / 186cm
Weight: 3522 to 4136 pounds
Front tire: 8-16
Rear tire: 14.9-24

CASEIH L350 LOADER

Height (to pin): 105inches / 266cm
Lift to full height (at pin): 2,000lbs / 907kg

ELECTRICAL

Ground: negative
Charging system: alternator
Charging amps: 40 (ROPS)/55 (cab)/75 (cab optional)
Battery CCA: 600
Battery volts: 12

About CaseIH Tractor

The CaseIH Farmall 50 tractor is part of the 9R tractor series. The Farmall 50 is a Compact Utility Tractors type, that is used mainly in Agriculture Tractors. The Farmall 50 tractor is equipped by a engine. This setup offers a enhanced usability in the actual world.