CaseIH Farmall 80 Tractor (2010)
Manufacturer:CaseIH
Price:N/A
Series:Farmall Utility Series
Model:Farmall 80
Equipment Type: Utility Tractors
Factory:Ankara, Turkey
Full Specifications
OCED TRACTOR TEST 2583 2
- Description
- Diesel 12-speed 4WD December 2008 - January 2009, Link: OCED Tractor Test 2583 file PTO performance Drawbar performance
- Max power
- 59.7hp / 44.5kW
- Fuel use
- 4.2gal/hour / 15.9l/hour
- Power at rated engine speed
- 70.3hp / 52.4kW
- Power at rated PTO speed
- 70.9hp / 52.9kW
- Max pull
- 4,795lbs / 2175kg
CASEIH FARMALL 80 POWER
- Engine (gross)
- 72hp / 53.7kW
- PTO (claimed)
- 62hp / 46.2kW
- Drawbar (tested)
- 59.7hp / 44.5kW
- PTO (tested)
- 72.1hp / 53.8kW
ENGINE DETAIL
- Description
- FPT turbocharged intercooled diesel 4-cylinder liquid-cooled
- Displacement
- 195ci / 3.2L
- Bore/Stroke
- 3.898x4.094inches / 99x 104mm
- Emissions
- Tier 3
- Power (gross)
- 72hp / 53.7kW
- Fuel system
- direct injection with mechanical governor
- Air cleaner
- dual dry elements
- Pre-heating
- thermostart
- Rated RPM
- 2500
- Starter
- electric
- Starter volts
- 12
CASEIH FARMALL 80 ENGINE
- Description
- FPT 3.2L 4-cyl diesel
- Fuel tank
- 23.8gal / 90.1L
TRANSMISSIONS OVERVIEW
- Description
- 12-speed mechanical shuttle 20-speed mechanical shuttle with creeper
TRANSMISSION 1
- Type
- mechanical shuttle
- Gears
- 12 forward and reverse
- Clutch
- mechanical dry disc
- Description
- Three ranges with four gears per range. Left-hand reverser requires use of clutch to change directions
TRANSMISSION 2
- Type
- mechanical shuttle with creeper
- Gears
- 20 forward and 12 reverse
MECHANICAL
- Chassis
- 4x2 2WD/4x4 MFWD 4WD
- Differential lock
- mechanical rear lock
- Steering
- hydrostatic power
- Brakes
- hydraulic wet disc
- Cab
- Flat deck platform with ROPS. Cab optional
- Transmissions
- 12-speed mechanical shuttle 20-speed mechanical shuttle with creeper
HYDRAULICS
- Type
- open center
- Rear valves
- 1 to 3
- Pump flow
- 13.6gpm / 51.5lpm
- Total flow
- 21.7gpm / 82.1lpm
- Steering flow
- 8.1gpm / 30.7lpm
TRACTOR HITCH
- Rear Type
- 2
- Control
- position control and mechanical lower-link draft sensing
- Rear lift (at 24
- 5,025lbs / 2279kg
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Clutch
- mechanical dry clutch
- Rear RPM
- 540
DIMENSIONS
- 2WD Wheelbase
- 91inches / 231cm
- 4WD Wheelbase
- 87inches / 220cm
- Height (ROPS)
- 101.1inches / 256cm
- Height (cab)
- 103.1inches / 261cm
CASEIH FARMALL 80 WEIGHT
- Shipping
- 5,702lbs / 2586kg (2WD ROPS) 6,254lbs / 2836kg (4WD ROPS) 6,363lbs / 2886kg (2WD cab) 6,915lbs / 3136kg (4WD cab)
DIMENSIONS & TIRES
- 2WD Wheelbase
- 91inches / 231cm
- 4WD Wheelbase
- 87inches / 220cm
- Weight
- 5702 to 6915 pounds
CASEIH L730 LOADER
- Height (to pin)
- 136inches / 345cm
- Clearance, dumped bucket
- 98inches / 248cm
- Dump reach
- 36inches / 91cm
- Dump angle
- 58°
- Rollback angle
- 45°
- Breakout force (lift)
- 3,300lbs / 1496kg
- Lift to full height (at pin)
- 2,500lbs / 1134kg
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Charging amps
- 85
- Battery CCA
- 800
- Battery volts
- 12
About CaseIH Tractor
The CaseIH Farmall 80 tractor is part of the Farmall Utility Series. The Farmall 80 is classified as a Utility Tractors and that is primarily used for Agriculture Tractors operations. The Farmall 80 tractor is equipped by a engine. This setup more effectiveness in the actual world.
