CaseIH Farmall 90C Tractor (2015)
Manufacturer:CaseIH
Price:74,557(USD)
Series:Farmall C Series
Model:Farmall 90C
Equipment Type: Utility Tractors
Factory:
Full Specifications
OCED TRACTOR TEST 3002 2
- Description
- Diesel 12-speed 4WD April 2016 - 2016, Link: OCED Tractor Test 3002 file PTO performance Drawbar performance Gear 3M used for power test Gear 2M used for pull test
- Max power
- 51.4hp / 38.3kW
- Fuel use
- 4.3gal/hour / 16.3l/hour
- Power at rated engine speed
- 66.6hp / 49.7kW
- Power at rated PTO speed
- 75.6hp / 56.4kW
- Max pull
- 6765lbs / 3068kg
CASEIH FARMALL 90C POWER
- Engine
- 86hp / 64.1kW
- PTO (claimed)
- 73hp / 54.4kW
- Drawbar (tested)
- 51.4hp / 38.3kW
- PTO (tested)
- 75.6hp / 56.4kW
ENGINE DETAIL
- Description
- Fiat Powertrain Technologies (FPT) wastegate turbocharged and aftercooled 4-cylinder liquid-cooled
- Displacement
- 207ci / 3.4L
- Bore/Stroke
- 3.90x4.33inches / 99x 110mm
- Emissions
- Tier 4
- Emission control
- selective catalytic reduction (SCR) with cooled exhaust-gas recirculation
- Power
- 86hp / 64.1kW
- Fuel system
- high pressure common rail electronic direct injection
- Starter
- electric
- Starter volts
- 12
CASEIH FARMALL 90C ENGINE
- Description
- Fiat Powertrain Technologies (FPT) 3.4L 4-cyl
- Fuel tank
- 30.3gal / 114.7L
- Exhaust fluid (DEF)
- 2.8gal / 10.6L
TRANSMISSIONS OVERVIEW
- Description
- 12-speed mechanical shuttle/12-speed power shuttle/24-speed
TRANSMISSION 1
- Type
- mechanical shuttle
- Gears
- 12 forward and reverse
- Description
- Four synchronized gears in three non-synchronized ranges with mechanical shuttle shift
TRANSMISSION 2
- Type
- power shuttle
- Gears
- 12 forward and reverse
- Description
- Four synchronized gears in three non-synchronized ranges with power shuttle shift
TRANSMISSION 3
- Gears
- 24 forward and reverse
- Description
- Four synchronized gears in three non-synchronized ranges with power shuttle shift and two-speed high-low shift
MECHANICAL
- Chassis
- 4x2 2WD/4x4 MFWD 4WD
- Final drives
- inboard planetary
- Steering
- power
- Brakes
- wet disc
- Cab
- Two-post ROPS. Cab optional with air-conditioning
- Transmissions
- 12-speed mechanical shuttle 12-speed power shuttle 24-speed
HYDRAULICS
- Type
- open center
- Valves
- 2 or 3
- Pump flow
- 16..9 gpm /60.6 lpm
TRACTOR HITCH
- Rear Type
- II/I
- Control
- top link draft sensing
- Rear lift (at 24
- 4339lbs / 1968kg 5620lbs / 2549kg
- Rear Arms
- telescopic link ends
- Drawbar
- swinging extendable drawbar
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 540/540/540E/540/1000
CASEIH FARMALL 90C TIRES
- 2WD Standard tires (ag)
- Front: 7.50x16. Rear: 16.9R30
- 4WD Standard tires (ag)
- Front: 14.9R24. Rear: 18.4R34
DIMENSIONS
- 2WD Wheelbase
- 92.2inches / 234cm
- 4WD Wheelbase
- 90inches / 228cm
- 2WD Length
- 163.1inches / 414cm
- 4WD Length
- 160.1inches / 406cm
- Width
- 75.7inches / 192cm
- Height (ROPS)
- 106.5inches / 270cm
- Height (cab)
- 102.1inches / 259cm
- Rear axle
- Flange
CASEIH FARMALL 90C WEIGHT
- 2WD ROPS
- 6989lbs / 3170kg
- 4WD ROPS
- 7672lbs / 3480kg
- 2WD Cab
- 7474lbs / 3390kg
- 4WD Cab
- 8157lbs / 3700kg
DIMENSIONS & TIRES
- 2WD Wheelbase
- 92.2inches / 234cm
- 4WD Wheelbase
- 90inches / 228cm
- Weight
- 6989 to 8157 pounds
- Front tire
- 7.50x16
- 2WD Rear tire
- 16.9R30
CASE IH L575 LOADER
- Breakout force (at pin)
- 4730lbs / 2145kg
- Breakout force (bucket)
- 3058lbs / 1387kg
- Lift to full height (at pin)
- 1782lbs / 808kg
CASE IH L735 LOADER
- Breakout force (at pin)
- 4960lbs / 2249kg
- Lift to full height (at pin)
- 4034lbs / 1829kg
- Raise time to height
- 2.4 s
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Battery volts
- 12
About CaseIH Tractor
The Farmall 90C tractor is part of the CaseIH's Farmall C Series. The Farmall 90C is classified as a Utility Tractors and that is often used for Agriculture Tractors activities. The engine of the Farmall 90C tractor generates. This arrangement improves usability in the real world.
