CaseIH Farmall 95 Tractor (2010)

Manufacturer:CaseIH

Price:N/A

Series:Farmall Utility Series

Model:Farmall 95

Equipment Type: Utility Tractors

Factory:Ankara, Turkey

Full Specifications

OCED TRACTOR TEST 2510 2

Description: Diesel 12-speed 4WD December 2008 - 2008, Link: OCED Tractor Test 2510 file PTO performance Drawbar performance
Power at rated engine speed: 80.7hp / 60.2kW
Fuel use: 5.1gal/hour / 19.3l/hour
Power at rated PTO speed: 80.6hp / 60.1kW
Max power: 74.4hp / 55.5kW
Max pull: 7,415lbs / 3363kg

CASEIH FARMALL 95 POWER

Engine (gross): 90hp / 67.1kW
PTO (claimed): 80hp / 59.7kW
Drawbar (tested): 74.4hp / 55.5kW
PTO (tested): 80.7hp / 60.2kW

ENGINE DETAIL

Description: FPT turbocharged intercooled diesel 4-cylinder liquid-cooled
Displacement: 274ci / 4.5L
Bore/Stroke: 4.094x5.196inches / 104x 132mm
Emissions: Tier 3
Power (gross): 90hp / 67.1kW
Fuel system: direct injection with mechanical governor
Air cleaner: dual dry elements
Pre-heating: thermostart
Rated RPM: 2500
Starter: electric
Starter volts: 12

CASEIH FARMALL 95 ENGINE

Description: FPT 4.5L 4-cyl diesel
Fuel tank: 23.8gal / 90.1L

TRANSMISSIONS OVERVIEW

Description: 12-speed mechanical shuttle 20-speed mechanical shuttle with creeper

TRANSMISSION 1

Type: mechanical shuttle
Gears: 12 forward and reverse
Clutch: mechanical dry disc
Description: Three ranges with four gears per range. Left-hand reverser requires use of clutch to change directions

TRANSMISSION 2

Type: mechanical shuttle with creeper
Gears: 20 forward and 12 reverse

MECHANICAL

Chassis: 4x2 2WD/4x4 MFWD 4WD
Differential lock: mechanical rear lock
Steering: hydrostatic power
Brakes: hydraulic wet disc
Cab: Flat deck platform with ROPS. Cab optional
Transmissions: 12-speed mechanical shuttle 20-speed mechanical shuttle with creeper

HYDRAULICS

Type: open center
Pressure: 2755psi / 190.0bar
Rear valves: 1 to 3
Pump flow: 13.6gpm / 51.5lpm
Total flow: 21.7gpm / 82.1lpm
Steering flow: 8.1gpm / 30.7lpm

TRACTOR HITCH

Rear Type: 2
Control: position control and mechanical lower-link draft sensing
Rear lift (at 24: 5,025lbs / 2279kg

POWER TAKE-OFF (PTO)

Rear PTO: independent
Clutch: mechanical dry clutch
Rear RPM: 540/540/1000 (optional)

DIMENSIONS

2WD Wheelbase: 94inches / 238cm
4WD Wheelbase: 92inches / 233cm
Height (ROPS): 101.1inches / 256cm
Height (cab): 103.1inches / 261cm

CASEIH FARMALL 95 WEIGHT

Shipping: 6,107lbs / 2770kg (2WD ROPS) 6,659lbs / 3020kg (4WD ROPS) 6,768lbs / 3069kg (2WD cab) 7,320lbs / 3320kg (4WD cab)

DIMENSIONS & TIRES

2WD Wheelbase: 94inches / 238cm
4WD Wheelbase: 92inches / 233cm
Weight: 6107 to 7320 pounds

CASE IH L730 LOADER

Height (to pin): 136inches / 345cm
Clearance, dumped bucket: 98inches / 248cm
Dump reach: 36inches / 91cm
Dump angle: 58°
Rollback angle: 45°
Breakout force (lift): 3,300lbs / 1496kg
Lift to full height (at pin): 2,500lbs / 1134kg

ELECTRICAL

Ground: negative
Charging system: alternator
Charging amps: 85
Battery CCA: 800
Battery volts: 12

About CaseIH Tractor

The Farmall 95 model tractor belongs to the CaseIH Farmall Utility Series. The Farmall 95 is a Utility Tractors type, which is used often in Agriculture Tractors. A engine powers the Farmall 95 tractor. This setup improves usability in the real world situation.