CaseIH Puma 160 Tractor (2013)
Manufacturer:CaseIH
Price:N/A
Series:Puma Series
Model:Puma 160
Equipment Type: Row-Crop Tractors
Factory:
Full Specifications
OCED TRACTOR TEST 2653 2
- Description
- Diesel CVT 4WD May 2011 - September 2011, Link: OCED Tractor Test 2653 file PTO performance Drawbar performance Pull at 7.5 KPH Pull at 5.0 KPH
- Max power
- 118.5hp / 88.4kW
- Fuel use
- 8.4gal/hour / 31.8l/hour
- Power at rated engine speed
- 144.3hp / 107.6kW
- Power at rated PTO speed
- 151.5hp / 113.0kW
- Max pull
- 13915lbs / 6311kg
CASEIH PUMA 160 POWER
- Engine (gross)
- 160hp / 119.3kW
- Engine (max)
- 203hp / 151.4kW
- PTO (claimed)
- 135hp / 100.7kW
- Drawbar (tested)
- 118.5hp / 88.4kW
- PTO (tested)
- 155.8hp / 116.2kW
ENGINE DETAIL
- Description
- FPT turbocharged diesel 6-cylinder liquid-cooled
- Displacement
- 410.6ci / 6.7L
- Bore/Stroke
- 4.094x5.197inches / 104x 132mm
- Emissions
- Interim Tier 4
- Emission control
- selective catalytic reduction (SCR)
- Rated Power (ECE R120)
- 160hp / 119.3kW
- Maximum Power (ECE R120)
- 203hp / 151.4kW
- Rated RPM
- 2200
- Starter
- electric
- Starter volts
- 12
- Oil capacity
- 16qts / 15.1L
CASEIH PUMA 160 ENGINE
- Description
- FPT 6.7L 6-cyl diesel
TRANSMISSIONS OVERVIEW
- Description
- 18-speed full power shift 19-speed full power shift continuously variable transmission (CVT)
TRANSMISSION 1
- Type
- full power shift
- Gears
- 18 forward and 6 reverse
- Clutch
- electro-hydraulic wet disc
TRANSMISSION 2
- Transmission
- EconoGear
- Type
- full power shift
- Gears
- 19 forward and 6 reverse
- Clutch
- electro-hydraulic wet disc
- Description
- Adds transport gear to the power shift, providing road speed at reduced engine RPMs
TRANSMISSION 3
- Type
- continuously variable transmission (CVT)
- Gears
- infinite forward and reverse
SPEEDS
- Description
- The CVT is available with optional 50 km-h top speed
MECHANICAL
- Chassis
- 4x4 MFWD 4WD
- Cab
- Cab standard. Optional cab suspension
- Transmissions
- 18-speed full power shift 19-speed full power shift continuously variable transmission (CVT)
CAPACITY
- Fuel
- 86gal / 325.5L
- Exhaust fluid (DEF)
- 12.7gal / 48.1L
- Hydraulic system
- 20.5gal / 77.6L
HYDRAULICS
- Type
- closed center pressure flow compensating (PFC)
- Capacity
- 20.5gal / 77.6L
- Rear valves
- 3 to 4 (mechanical) / 3 to 5 (electronic)
- Pump flow
- 29gpm / 109.8lpm 32gpm / 121.1lpm (optional)
TRACTOR HITCH
- Rear Type
- 2/3N
- Rear lift
- 7,900lbs / 3583kg 9,200lbs / 4173kg (optional)
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 540/1000 (1.75)
DIMENSIONS
- Wheelbase
- 107.6inches / 273cm 109.8inches / 278cm (suspended front axle)
- Operating weight
- 16360lbs / 7420kg
- Rear axle
- Bar: 3.625 by 112inches / 92by 2844mm
- Front tread
- 61.4 to 88.8inches / 155to 225cm
DIMENSIONS & TIRES
- Wheelbase
- 107.6inches / 273cm 109.8inches / 278cm (suspended front axle)
- Weight
- 16360lbs / 7420kg
CASE IH L760 LOADER
- Height (to pin)
- 169inches / 429cm
- Clearance, dumped bucket
- 131inches / 332cm
- Dump reach
- 29inches / 73cm
- Dump angle
- 56°
- Reach at ground
- 104inches / 264cm
- Rollback angle
- 41°
- Breakout force (at pin)
- 5800lbs / 2630kg
- Breakout force (at 800mm)
- 6300lbs / 2857kg
- Lift to full height (at pin)
- 5350lbs / 2426kg
- Lift to full height (at 800mm)
- 4650lbs / 2109kg
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Charging amps
- 150/200
- Batteries
- 2
- Battery CCA
- 650
- Battery volts
- 12
About CaseIH Tractor
The Puma 160 model tractor is part of CaseIH's 9R line of tractors. The Puma 160 is a kind of Row-Crop Tractors and is majorly used for Agriculture Tractors applications. A engine powers the Puma 160 tractor. This configuration more applicability in the real world.
