Challenger MT225B Tractor (2008)
Manufacturer:Challenger
Price:N/A
Series:MT200B Series
Model:MT225B
Equipment Type: Compact Utility Tractors
Factory:Matsuyama, Japan
Full Specifications
CHALLENGER MT225B POWER
- Engine (gross)
- 22.5hp / 16.8kW
- Engine (net)
- 22hp / 16.4kW
- PTO (claimed)
- 17.6hp / 13.1kW
ENGINE DETAIL
- Description
- Iseki E3312 diesel 3-cylinder liquid-cooled
- Displacement
- 68.5ci / 1.1L
- Bore/Stroke
- 3.08x3.07inches / 78x 78mm
- Power (gross)
- 22.5hp / 16.8kW
- Fuel system
- indirect injection
- Air cleaner
- dry
- Pre-heating
- glow plugs
- Compression
- 22.5:1
- Rated RPM
- 2600
- Idle RPM
- 1250-2860
- Starter volts
- 12
- Oil capacity
- 2.9qts / 2.7L
- Coolant capacity
- 7.5qts / 7.1L
CHALLENGER MT225B ENGINE
- Description
- Iseki 1.1L 3-cyl diesel
TRANSMISSION
- Type
- hydrostatic
- Gears
- infinite (2-range) forward and reverse
- Oil capacity
- 14.8qts / 14.0L
SPEEDS
- Description
- With 9.5-16 R1 rear tires
MECHANICAL
- Chassis
- 4x4 MFWD 4WD
- Final drives
- spur gear
- Differential lock
- mechanical rear
- Steering
- hydrostatic power
- Brakes
- wet disc
- Cab
- Two-post fixed ROPS
- Transmission
- hydrostatic
CAPACITY
- Fuel
- 6.6gal / 25.0L
- Front diff.
- 2.9qts / 2.7L
HYDRAULICS
- Type
- open center
- Pressure
- 1990psi / 137.2bar
- Rear valves
- 2
- Mid valves
- 2
- Pump flow
- 5.5gpm / 20.8lpm
- Total flow
- 8.1gpm / 30.7lpm
- Steering flow
- 2.64gpm / 10.0lpm
- Steering press.
- 1493psi / 102.9bar
TRACTOR HITCH
- Rear Type
- I
- Control
- position and response control
- Rear lift (at ends)
- 1190lbs / 539kg
- Rear lift (at 24
- 591lbs / 268kg
- Rear Arms
- fixed link ends
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Clutch
- electro-hydraulic wet disc
- Rear RPM
- 540 (1.375)
- Mid PTO
- standard
- Mid RPM
- 2000 (1.00)
CHALLENGER MT225B TIRES
- Ag front
- 6-12
- Ag rear
- 9.5-16
- Lawn/turf front
- 23x10.50-12
- Lawn/turf rear
- 33x12.50-16.5
- Industrial front
- 23x8.50-12
- Industrial rear
- 12x16.5
DIMENSIONS
- Wheelbase
- 59.8inches / 151cm
- Length
- 102inches / 259cm
- Width
- 39.4inches / 100cm *Minimum width
- Height (ROPS)
- 77inches / 195cm
- Ground clearance
- 10.4inches / 26cm
- Front axle
- Flange: 34.58inch length / 878mm
- Rear axle
- Flange: 33.62inch length / 853mm
- Front tread
- 35.6inches / 90cm
- Rear tread
- 35.6inches / 90cm
CHALLENGER MT225B WEIGHT
- 1609lbs / 729kg
- Max capacity
- 3086lbs / 1399kg
- Max front axle
- 1433lbs / 650kg
- Max rear axle
- 1653lbs / 749kg
DIMENSIONS & TIRES
- Wheelbase
- 59.8inches / 151cm
- Weight
- 1609lbs / 729kg
- Front tire
- 6-12
- Rear tire
- 9.5-16
CHALLENGER ML10B LOADER
- Height (to pin)
- 74inches / 187cm
- Clearance, dumped bucket
- 53.9inches / 136cm
- Dump reach
- 22inches / 55cm
- Dump angle
- 51°
- Reach at ground
- 51inches / 129cm
- Rollback angle
- 23°
- Breakout force (at pin)
- 1854lbs / 840kg
- Lift to full height (at pin)
- 875lbs / 396kg
- Lift to full height (at 500mm)
- 624lbs / 283kg
- Lift to 1.5m (at 500mm)
- 741lbs / 336kg
- Bucket width
- 48inches / 121cm
- Raise time to height
- 6 s
- Bucket dump time
- 4.8 s
- Lowering time
- 4 s
- Rollback time
- 4.3 s
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Charging amps
- 40
- Battery CCA
- 435
- Battery volts
- 12
About Challenger Tractor
The MT225B model tractor is member of Challenger's 9R line of tractors. The MT225B is a Compact Utility Tractors type, that is used often in Agriculture Tractors. The engine of the MT225B tractors is impressive. This arrangement improves usability in the real world.
