Challenger MT685C Tractor (2010)
Manufacturer:Challenger
Price:N/A
Series:MT600C Series
Model:MT685C
Equipment Type: Row-Crop Tractors
Factory:Beauvais, France
Full Specifications
CHALLENGER MT685C POWER
- Engine
- 340hp / 253.5kW
- PTO (claimed)
- 320hp / 238.6kW
ENGINE DETAIL
- Description
- AGCO SISU POWER 84CTA turbocharged intercooled diesel 6-cylinder liquid-cooled The engine uses AGCO's e3 selective catalytic reduction (SCR) system to reduce nitrogen oxides (NOx). The system uses a diesel exhaust fluid that is injected into the exhaust gas.
- Displacement
- 512.6ci / 8.4L
- Bore/Stroke
- 4.37x5.71inches / 111x 145 mm
- Emissions
- Interim Tier 4
- Emission control
- selective catalytic reduction (SCR)
- Power
- 340hp / 253.5kW
- Maximum Power
- 370hp / 275.9kW
- Compression
- 16.7:1
- Rated RPM
- 2200
- Torque
- 1136 lb-ft /1540.4 Nm
- Torque RPM
- 1500
- Starter type
- electric
CHALLENGER MT685C ENGINE
- Description
- AGCO SISU POWER 8.4L 6-cyl diesel
- Fuel tank
- 155.9gal / 590.1L/182.3gal / 690.0L (without e3)
- Exhaust fluid (DEF)
- 7.9gal / 29.9L
TRANSMISSION
- Transmission
- Dyna-VT
- Type
- continuously-variable transmission
- Gears
- infinite forward and reverse
MECHANICAL
- Chassis
- 4x4 MFWD 4WD
- Steering
- power
- Brakes
- hydraulic wet disc
- Cab
- Cab standard with heat and air-conditioning. Optional heated seat, power adjustable mirrors, and automatic temperature control.
- Transmission
- continuously-variable transmission
HYDRAULICS
- Type
- closed center load sensing
- Pressure
- 2,901psi / 200.0bar
- Valves
- 4 to 6
- Pump flow
- 26.4gpm / 99.9lpm
- Total flow
- 46.2gpm / 174.9lpm
TRACTOR HITCH
- Rear Type
- III, IV
- Rear lift (at ends)
- 26,460lbs / 12002kg
- Rear lift (at 24
- 21,336lbs / 9678kg
- Front Hitch
- III
- Front lift (at ends)
- 11,020lbs / 4998kg
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Clutch
- electro-hydraulic
- Rear RPM
- 1000E / 1000 (1.75)/540E / 1000 (1.375)
- Front PTO
- independent
- Front RPM
- 1000 (1.375)
CHALLENGER MT685C TIRES
- Ag front
- 480/70R34
- Ag rear
- 520/85R46
DIMENSIONS
- Wheelbase
- 122.2inches / 310cm
- Length
- 223.2inches / 566cm
- Height (cab)
- 133.1inches / 338cm
- Shiping weight
- 24,250lbs / 10999kg
- Max weight
- 38,890lbs / 17640kg
DIMENSIONS & TIRES
- Wheelbase
- 122.2inches / 310cm
- Weight
- 24,250lbs / 10999kg
- Front tire
- 480/70R34
- Rear tire
- 520/85R46
CHALLENGER ML99B LOADER
- Height (to pin)
- 187inches / 474cm
- Dump angle
- 55°
- Breakout force (at pin)
- 7700lbs / 3492kg
- Breakout force (at 800mm)
- 6600lbs / 2993kg
- Breakout force (bucket)
- 10560lbs / 4790kg
- Lift to full height (at pin)
- 5610lbs / 2544kg
- Lift to full height (at 800mm)
- 4950lbs / 2245kg
- Lift to 1.5m (at pin)
- 7150lbs / 3243kg
- Lift to 1.5m (at 800mm)
- 6160lbs / 2794kg
- Bucket width
- 83inches / 210cm/95inches / 241cm/102inches / 259cm
MT685C SERIAL NUMBERS
- Location
- Serial number plate below the tractor cab door on the right side.
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Charging amps
- 240*Two 120A alternators.
- Batteries
- 2
- Battery CCA
- 775
- Battery volts
- 12
About Challenger Tractor
The MT685C tractor is part of the Challenger's MT600C Series. The MT685C is a Row-Crop Tractors and is majorly used for Agriculture Tractors production. The MT685C tractor has a engine. This configuration boosts real-world effectiveness.
