John Deere 1025R Tractor
Manufacturer:John Deere
Price:15,066(USD)
Series:1 Series
Model:1025R
Equipment Type: Compact Tractors
Factory:None
Full Specifications
KEY SPECS
- Engine power (gross)
- SAE J1995 rated power: 17.8 kW/23.9 hp/24.2 PS
- Power take-off (PTO) power
- 12.8 kW/17.2 hp
- Steering hydraulics
- 13.2 L/min/3.5 gpm
- Implement hydraulics
- 13.2 L/min/3.5 gpm
- Hitch type
- Limited Category 1
- Lift capacity, 24-in. behind link arms
- 344 kg/758 lb
- Standard transmission; forward/reverse
- Hydrostatic - two range
- Cruise control
- Standard
- Approximate shipping weight (open-station; cab)
- Open station: 706 kg/1556 lb/Cab: 906 kg/1996 lb
- Wheelbase
- 1450 mm/57.1 in.
ENGINE
- Manufacturer
- Yanmar®
- Engine model
- 3TNV80F-NCJT
- Engine power (gross)
- SAE J1995 rated power: 17.8 kW/23.9 hp/24.2 PS
- Power take-off (PTO) power
- 12.8 kW/17.2 hp
- Rated engine speed
- 3200 rpm
- Type
- Diesel
- Injection pump type
- Indirect injection
- Aspiration
- Natural
- Emissions compliance
- Final Tier 4
- Cylinders/displacement
- Three cylinders: 1.267 L/77.3 cu in.
- Number of cylinders
- Three
- Cylinder liners
- Cast-in-block
- Bore and stroke
- 80 x 84 mm/3.15 x 3.31 in.
- Compression ratio
- 23.1:1
- Lubrication
- Pressurized
- Cooling system
- Water pump
- Air cleaner
- Dual element with mechanical restriction indicator
- Engine torque at rated speed
- 53.1 Nm/39.2 lb-ft
- Fuel tank capacity
- 24 L/6.3 U.S. gal.
ELECTRICAL
- Battery size
- 500 CCA
- Alternator (12-V)
- 40 amp
- Starter size
- 1.2 kW/1.6 hp
FUEL SYSTEM
- Type
- Indirect injection
TRANSMISSION
- Standard transmission; forward/reverse
- Hydrostatic - two range
- Left-hand reverser
- No
- Final drive
- Spur gear
- Brakes
- Wet disc (left-hand pedal)
- Steering
- Power
- Axle capacity
- Front/612 kg/1349 lb/Rear/715 kg/1576 lb/
- Creeper
- No
- Cruise control
- Standard
- Differential lock
- Yes
HYDRAULICS
- Type
- Open center
- Pump rated output
- Steering/13.2 L/min/3.5 gpm/Implement/13.2 L/min/3.5 gpm/24 L/min/6.3 gpm
- Pump type
- Single gear
- Maximum operating pressure
- 138 bar/2000 psi
- Draft control sensing
- Position control
- Remote control valves available
- Three
3-POINT HITCH
- Type
- Limited Category 1
- Lift capacity, 24-in. behind link arms
- 344 kg/758 lb
POWER TAKE-OFF (PTO)
- Standard
- Rear: 540 rpm/Mid: 2100 rpm
- Control
- Independent
- Clutch
- Wet disk
- Brake (for mid and rear PTO)
- Wet disk
FLUID CAPACITIES
- Crankcase with filter
- 2.7 L/2.9 qt
- Transmission and hydraulic system
- 12.3 L/3.2 gal.
FINAL DRIVE
- Type
- Spur gear
- Differential lock
- Yes
OPERATOR STATION
- Rollover protective structure
- Type/Foldable/Yes
- Platform - flat/straddle
- One-piece semi flat
- Gear shift location - console/floor
- Left-hand side
CAB
- Air conditioning, temperature differential
- Heat only
- Doors
- Two
- Seat equipment
- Premium seat
DIMENSIONS
- Wheelbase
- 1450 mm/57.1 in.
- Front axle clearance
- 195 mm/7.7 in.
- Turning radius without brakes
- Outside front tire: 2.51 m/8.2 ft
- Limited slip differential
- No
- Approximate shipping weight (open-station; cab)
- Open station: 706 kg/1556 lb/Cab: 906 kg/1996 lb
TIRES
- Front
- R3 Turf: 18x8.50-10/R3 Turf Radial: 18x8.50-10/R4: 18x8.5-10
- Rear
- R3 Turf: 26x12-12/R4: 26x12-12
- Front tread range
- 931 mm/36.7 in.
- Rear tread spacing
- 895 mm/35.2 in.
MISCELLANEOUS
- Toolbox
- Yes
About John Deere Tractor
The John Deere 1025R tractor is part of the 9R tractor series. The 1025R is a Compact Tractors type, that is used often in Agriculture Tractors. The engine of the 1025R tractor offers 17.2 horsepower. This arrangement improves usability in the real world setting.
