Full Specifications
ENGINES OVERVIEW
Description
John Deere 3.0L 4-cyl gasoline John Deere 3.3L 4-cyl diesel
ENGINE DETAIL 1
Description
John Deere gasoline 4-cylinder 8-valve liquid-cooled inline valve-in-head
Displacement
180.43ci / 3.0L
Bore/Stroke
3.86x3.86inches / 98x 98mm
Fuel system
carburetor
Air cleaner
dry
Compression
7.5:1
Rated RPM
2500
Idle RPM
800-2650
Operating RPM
1500-2500
Firing order
1-3-4-2
Starter volts
12
Coolant capacity
14qts / 13.2L
Sparkplug gap
0.025inches / 0.635mm
Point gap
0.020inches / 0.508mm
Intake valve clearance
0.014inches / 0.356mm
Exhaust valve clearance
0.022inches / 0.559mm
ENGINE OIL 1
Oil capacity
7qts / 6.6L
Oil change
200h
ENGINE DETAIL 2
Description
John Deere diesel 4-cylinder 8-valve liquid-cooled inline valve-in-head
Displacement
202.68ci / 3.3L
Bore/Stroke
3.86x4.33inches / 98x 110mm
Air cleaner
oil bath
Pre-heating
ether injection block heater (optional)
Compression
16.3:1
Rated RPM
2500
Idle RPM
800-2650
Operating RPM
1500-2500
Firing order
1-3-4-2
Starter volts
12
Coolant capacity
14qts / 13.2L
Intake valve clearance
0.014inches / 0.356mm
Exhaust valve clearance
0.018inches / 0.457mm
ENGINE OIL 2
Oil capacity
7qts / 6.6L
Oil change
200h
JOHN DEERE 2510 ENGINES
Description
John Deere 3.0L 4-cyl gasoline John Deere 3.3L 4-cyl diesel
TRANSMISSIONS OVERVIEW
Description
8-speed partially synchronized 8-speed full power shift
TRANSMISSION 1
Transmission
John Deere Synchro-Range
Type
partially synchronized
Gears
8 forward and 2 reverse
Clutch
dry disc
Oil capacity
44qts (dry) / 41.6L 32qts (service) / 30.3L Deere 303
Oil change
1200 h
Description
Four shift stations with two forward gears gear. A reverse gear is also available in stations one and two. Synchronized shifting between gears within each station. Tractor must be stopped to shift between stations
TRANSMISSION 2
Transmission
John Deere Power Shift
Type
full power shift
Gear
8 forward and 4 reverse
Clutch
hydraulic wet disc
Oil capacity
56qts (dry) / 53.0L 44qts (service) / 41.6L Deere 303
Oil change
1200h
JOHN DEERE 2510 TRANSMISSIONS
Description
8-speed partially synchronized 8-speed full power shift
MECHANICAL
Description
Two-wheel drive Power steering Hydraulic wet disc brakes Open operator station
Differential lock
mechanical rear
CAPACITY
Fuel
26gal / 98.4L
Hydraulic system
11gal (Synchro Range) / 41.6L 14gal (Power Shift) / 53.0L
HYDRAULICS
Type
closed center constant pressure
Capacity
11gal (Synchro Range) / 41.6L 14gal (Power Shift) / 53.0L
Pressure
2250psi / 155.1bar
Valve
1 or 2/Deere 303
TRACTOR HITCH
Rear Type
II/I
Control
position and lower-link draft control
POWER TAKE-OFF (PTO)
Rear PTO
independent
Rear RPM
540/1000 (1.375)/1000 (1.375)
Engine RPM
1000@2100
Front PTO
optional
Front RPM
1000
JOHN DEERE 2510 TIRES
Standard tires (ag)
Front: 6.00-16. Rear: 13.6-38
DIMENSIONS & TIRES
Wheelbase
90inches / 228cm
Weight
6200 to 6745 pounds
Front tire
6.00-16
Rear tire
13.6-38
2510 SERIAL NUMBERS
1968
14291
Final
16501
2510 SERIAL LOCATION
Description
Serial number plate on the rear of the John Deere 2510, above the PTO shaft
ELECTRICAL
Ground
negative
Batteries
1 (gas) / 2 (diesel)
Battery volts
12
Battery AH
75