John Deere 2440 Tractor (1982)

Manufacturer:John Deere

Price:N/A

Series:2040 Series

Model:2440

Equipment Type: Utility Tractors

Factory:Dubuque, Iowa, USA

Full Specifications

NEBRASKA TRACTOR TEST 1085 2

Description: Diesel 16-speed 2WD October 23 - November 4, 1971 Link: Nebraska Tractor Test 1085 file PTO performance Drawbar performance Gear 5-Hi used for power test Gear 3-Lo used for pull test
Power at rated engine speed: 60.65hp / 45.2kW
Fuel use: 4.0gal/hour / 15.1l/hour
Power at rated PTO speed: 55.23hp / 41.2kW
Max power: 50.42hp / 37.6kW
Max pull: 6,472lbs / 2935kg

JOHN DEERE 2440 POWER

Drawbar (claimed): 52.3hp / 39.0kW
PTO (claimed): 60.65hp / 45.2kW
Drawbar (tested): 50.42hp / 37.6kW
PTO (tested): 60.65hp / 45.2kW

ENGINE DETAIL

Description: John Deere diesel 4-cylinder liquid-cooled
Displacement: 219ci / 3.6L
Bore/Stroke: 4.02x4.33inches / 102x 110mm
Rated RPM: 2500
Starter volts: 12
Coolant capacity: 12qts / 11.4L

JOHN DEERE 2440 ENGINE

Description: John Deere 3.6L 4-cyl diesel
Fuel tank: 19.5gal / 73.8L

TRANSMISSIONS OVERVIEW

Description: 8-speed collar shift 16-speed two-speed power shift 8-speed power shuttle

TRANSMISSION 1

Type: collar shift
Gears: 8 forward and 4 reverse
Description: Four gears (1-4) in two ranges (I and II) plus reverse (R) range

SPEEDS 1

Description: With 14.9-28 rear tires

TRANSMISSION 2

Transmission: Hi-Lo
Type: two-speed power shift
Gears: 16 forward and 8 reverse
Clutch: dry disc

SPEEDS 2

Description: With 14.9-28 rear tires

TRANSMISSION 3

Transmission: Direction Reverser
Type: power shuttle
Gears: 8 forward and reverse
Description: Four gears (1-4) in two ranges (I and II) with a left-hand hydraulic shuttle lever

MECHANICAL

Chassis: 4x2 2WD
Final drives: planetary
Differential lock: mechanical rear
Steering: power
Brakes: hydraulic wet disc
Cab: Two-post ROPS
Transmissions: 8-speed collar shift 16-speed two-speed power shift 8-speed power shuttle

HYDRAULICS

Type: closed center
Pump flow: 9 gpm /34.1 lpm

TRACTOR HITCH

Rear Type: II/I

POWER TAKE-OFF (PTO)

Rear PTO: independent
Rear RPM: 540/1000
Engine RPM: 540@2100

JOHN DEERE 2440 TIRES

Ag front: 6.00-16
Ag rear: 16.9-28

DIMENSIONS

Wheelbase: 85.75inches / 217cm (straight axle) 79.5inches / 201cm (swept axle)
Length: 139.5inches / 354cm
Width: 69.5inches / 176cm
Height: 61.3inches / 155cm
Height (exhaust): 101.7inches / 258cm
Shiping weight: 4,750lbs / 2154kg
Clearance (front axle): 25.4inches / 64cm
Front tread: 49 to 79inches / 124to 200cm (swept)
Rear tread: 52 to 80inches / 132to 203cm (power-adjust)

DIMENSIONS & TIRES

Wheelbase: 85.75inches / 217cm (straight axle) 79.5inches / 201cm (swept axle)
Weight: 4,750lbs / 2154kg
Front tire: 6.00-16
Rear tire: 16.9-28

2440 SERIAL NUMBERS

Location: Serial number plate on right side of the 2440 tractor frame, above the front axle
1976: 235210
1977: 258106
1978: 280789
1979: 305501
1980: 341000
1981: 362173
1982: 376746

ELECTRICAL

Ground: negative
Battery volts: 12

About John Deere Tractor

The 2440 tractor is part of the John Deere's 2040 Series. The 2440 is a type of Utility Tractors and that is primarily used for Agriculture Tractors operations. The 2440 tractor is operated by a engine. This setup offers a better usability in the actual world.