John Deere 4030 Tractor (1977)

Manufacturer:John Deere

Price:17,721(USD)

Series:Generation II Series

Model:4030

Equipment Type: Row-Crop Tractors

Factory:Waterloo, Iowa, USA

Full Specifications

NEBRASKA TRACTOR TEST 1111 2

Description: Diesel Quad-Range 2WD October 9 - 13, 1972 Link: Nebraska Tractor Test 1111 file PTO performance Drawbar performance
Power at rated engine speed: 80.33hp / 59.9kW
Fuel use: 5.7gal/hour / 21.6l/hour
Power at rated PTO speed: 77.72hp / 58.0kW
Max power: 67.03hp / 50.0kW
Max pull: 7,512lbs / 3407kg

JOHN DEERE 4030 POWER

PTO (claimed): 80hp / 59.7kW
Drawbar (tested): 67.03hp / 50.0kW
PTO (tested): 80.33hp / 59.9kW

ENGINES OVERVIEW

Description: John Deere 5.4L 6-cyl diesel John Deere 5.0L 6-cyl gasoline

ENGINE DETAIL 1

Description: John Deere diesel 6-cylinder liquid-cooled inline horizontal-shaft
Displacement: 329ci / 5.4L
Bore/Stroke: 4.02x4.33inches / 102x 110mm
Air cleaner: dry with secondary element
Pre-heating: ether injection coolant heater
Compression: 16.2:1
Rated RPM: 2500
Idle RPM: 800-2660
Operating RPM: 1500-2500
Starter: electric
Starter volts: 12
Oil capacity: 17qts / 16.1L
Coolant capacity: 22qts / 20.8L

ENGINE DETAIL 2

Description: John Deere gasoline 6-cylinder liquid-cooled, The gasoline engine was available only during the 1973 model year on the 4030
Displacement: 303ci / 5.0L
Bore/Stroke: 3.86x4.33inches / 98x 110mm
Starter: electric
Starter volts: 12

JOHN DEERE 4030 ENGINES

Description: John Deere 5.4L 6-cyl diesel John Deere 5.0L 6-cyl gasoline

TRANSMISSIONS OVERVIEW

Description: 8-speed partially synchronized 16-speed partial power shift 13-speed creeper

TRANSMISSION 1

Transmission: John Deere Syncro-Range
Type: partially synchronized
Gears: 8 forward and 2 reverse
Clutch: hydraulic wet disc
Oil capacity: 64qts / 60.6L
Description: Four shift stations with two gears each, plus reverse gear in the first two shift stations. Tractor must be stopped, and clutch used, to shift between stations. Once in a shift station the tractor may be shifted on the move, using the clutch, between the gears in that station

SPEEDS

Description: With 18.4-38 rear tires

TRANSMISSION 2

Transmission: John Deere Quad-Range
Type: partial power shift
Gears: 16 forward and 6 reverse
Clutch: hydraulic wet disc
Oil capacity: 64qts / 60.6L
Description: Four gears (1-4) in four ranges (A-D). Power shift between gears 1-2 and 3-4 in each range with a synchronized shift (using clutch) between 2-3. Tractor must be stopped to shift range

TRANSMISSION 3

Transmission: Syncro-Range Creeper
Type: creeper
Gears: 13 forward and 4 reverse
Description: Optional creeper range adds additional speeds to the first five gears of the Syncro-Range transmission. An interlock prevents shifting into gears 6 through 8 while the creeper is engaged

MECHANICAL

Chassis: 4x2 2WD
Final drives: planetary
Differential lock: hydro-mechanical rear
Steering: power
Brakes: differential hydraulic wet disc
Cab: Open operator station. Optional four-post Roll-Gard ROPS. Optional Sound-Gard cab with heat and air-conditioning available
Transmissions: 8-speed partially synchronized 16-speed partial power shift 13-speed creeper

CAPACITY

Fuel: 35gal / 132.5L
Hydraulic system: 13gal / 49.2L

HYDRAULICS

Type: closed center
Capacity: 13gal / 49.2L
Valves: 1 to 3
Pump flow: 23gpm / 87.1lpm

TRACTOR HITCH

Rear Type: II

POWER TAKE-OFF (PTO)

Rear PTO: independent
Rear RPM: 540/1000 (1.375)

JOHN DEERE 4030 TIRES

Ag front: 7.5L-15
Ag rear: 23.1-26 / 18.4-30 / 18.4-34 / 16.9-34 / 13.6-38

DIMENSIONS

Wheelbase: 101inches / 256cm
Length: 154.4inches / 392cm
Height (steering wheel): 84.5inches / 214cm
Height (cab): 107.7inches / 273cm
Clearance (front axle): 21.95inches / 55cm
Clearance (rear axle): 27.24inches / 69cm
Clearance (drawbar): 14.1inches / 35cm
Rear axle: Rack-and-pinion: 3.125 by 112inches / 79by 2844mm
Front tread: 48 to 68inches / 121to 172cm
Rear tread: 61 to 117inches / 154to 297cm

JOHN DEERE 4030 WEIGHT

Shipping: 7340lbs / 3329kg
Operating: 9180lbs / 4164kg
Ballasted: 10150lbs / 4604kg

DIMENSIONS & TIRES

Wheelbase: 101inches / 256cm
Weight: 7340 to 9180 pounds
Front tire: 6.00-16
Rear tire: 15.5-38

JOHN DEERE 148 LOADER

Loader weight: 1350lbs / 612kg
Height (to pin): 126inches / 320cm
Clearance, dumped bucket: 102inches / 259cm
Dump reach: 32inches / 81cm
Dump angle: 38°
Clearance, level bucket: 121inches / 307cm
Rollback angle: 11°
Breakout force (lift): 4700lbs / 2131kg
Lift to full height (at pin): 3100lbs / 1406kg
Bucket capacity: 0.5cu yd / 0.4cu m / 0.6cu yd / 0.5cu m / 0.8cu yd / 0.6cu m / 0.9cu yd / 0.7cu m
Bucket width: 60inches / 152cm 72inches / 182cm 84inches / 213cm 96inches / 243cm

4030 SERIAL NUMBERS

Location: Serial number plate on the rear of the John Deere 4030, above the PTO shaft
1973: 1000
1974: 6700
1975: 10153
1976: 13022
1977: 15417
Final: 16689

ELECTRICAL

Ground: negative
Charging system: alternator
Batteries: 2
Battery volts: 6

About John Deere Tractor

The John Deere 4030 type tractor is part of the Generation II Series of tractors. The 4030 is a Row-Crop Tractors type, that is used most often in Agriculture Tractors. A engine powers the 4030 tractor. This setting is more practical in the real world.