John Deere 4052M Heavy Duty Tractor
Manufacturer:John Deere
Price:45,884(USD)
Series:4M Series
Model:4052M Heavy Duty
Equipment Type: Compact Utility Tractors
Factory:Augusta, Georgia, USA
Full Specifications
KEY SPECS
- Engine power (gross)
- 37.9 kW/51.5 hp/PS at 2600 rpm/SAE J1995 rated power
- Power take-off (PTO) power
- eHydro transmission: 30.5 kW/40.9 hp/Per SAE J1995
- Steering hydraulics
- 23.5 L/min/6.2 gpm
- Implement hydraulics
- 42.3 L/min/11.2 gpm
- Hitch type
- Category 1/Category 2
- Lift capacity, 24-in. behind link arms
- 1135 kg/2500 lb
- Standard transmission; forward/reverse
- eHydro transmission
- Cruise control
- Standard
- Approximate shipping weight (open-station; cab)
- Open station: 1943 kg/4255 lb/Cab: Not applicable
- Wheelbase
- 185.5 cm/73 in.
ENGINE
- Family
- EYDXL2.09TDA/FYDXL2.09TDA/GYDXL2.09TDA
- Manufacturer
- Yanmar®
- Engine model
- 4TNV86CT-MJT
- Engine power (gross)
- 37.9 kW/51.5 hp/PS at 2600 rpm/SAE J1995 rated power
- Power take-off (PTO) power
- eHydro transmission: 30.5 kW/40.9 hp/Per SAE J1995
- Rated engine speed
- 2600 rpm
- Type
- Diesel
- Injection pump type
- High-pressure common rail direct injection
- Aspiration
- Turbocharged
- Emissions compliance
- Final Tier 4
- Cylinders/displacement
- 4 cylinders/2.091 L/127.6 cu in.
- Number of cylinders
- Four
- Cylinder liners
- Cast-in-block
- Bore and stroke
- 86 x 90 mm/3.4 x 3.54 in.
- Compression ratio
- 19.1:1
- Lubrication
- Pressurized
- Cooling system
- Liquid
- Air cleaner
- Dual element with electronic restriction indicator
- Engine torque at rated speed
- 139 Nm/102.5 lb-ft
- Fuel tank capacity
- 56.9 L/15 U.S. gal.
ELECTRICAL
- Battery size
- 770 CCA
- Alternator (12-V)
- 75 amp
- Starter size
- 2 kW/2.68 hp
FUEL SYSTEM
- Type
- High pressure common rail direct injection
TRANSMISSION
- Standard transmission; forward/reverse
- eHydro transmission
- Transmission gear ranges
- eHydro - Infinitely-variable three range
- Final drive
- Planetary
- Brakes
- Multi-plate wet disc
- Steering
- Hydrostatic power steering
- Clutch, wet/dry
- Wet
- Clutch disk diameter wet clutch
- 129 mm/5.08 in.
- Axle capacity
- Front/1600 kg/3528 lb/Rear/2400 kg/5292 lb/
- Creeper
- SpeedMatch standard
- Cruise control
- Standard
- Differential lock
- Yes
HYDRAULICS
- Type
- Open center
- Pump rated output
- Steering/23.5 L/min/6.2 gpm/Implement/42.3 L/min/11.2 gpm/
- Pump type
- Single gear
- Draft control sensing
- Position control
- Remote control valves available
- Two remotes standard
3-POINT HITCH
- Type
- Category 1/Category 2
- Lift capacity, 24-in. behind link arms
- 1135 kg/2500 lb
POWER TAKE-OFF (PTO)
- Standard
- Independent 540 rpm at 2600 rpm
- Optional
- 540E rpm
- Control
- Independent
- Clutch
- Wet disc
FLUID CAPACITIES
- Crankcase with filter
- 5.3 L/1.4 qt
- Transmission and hydraulic system
- 47.3 L/12.5 gal.
FINAL DRIVE
- Type
- Planetary
- Differential lock
- Yes
OPERATOR STATION
- Rollover protective structure
- Type/Foldable/Yes
- Platform - flat/straddle
- Flat
DIMENSIONS
- Wheelbase
- 185.5 cm/73 in.
- Front axle clearance
- 35.1 cm/13.8 in.
- Turning radius with brakes
- 2.8 m/9.19 ft
- Turning radius without brakes
- 3 m/9.84 ft
- Approximate shipping weight (open-station; cab)
- Open station: 1943 kg/4255 lb/Cab: Not applicable
TIRES
- Front
- R4 Industrial 31.5x13-16.5
- Rear
- R4 Industrial 16.9-24/R4 Industrial 19.5L-24
- Front tread range
- 1374.6 mm/54.1 in.
- Rear tread spacing
- 1375 mm/54.1 in./1495 mm/58.9 in.
About John Deere Tractor
The John Deere 4052M Heavy Duty tractor is part of the 4M Series of tractors. The 4052M Heavy Duty is a Compact Utility Tractors type, that is used most often in Agriculture Tractors. A 51 horsepower engine runs the 4052M Heavy Duty tractor. This setup offers a greater usability in the actual world.
