John Deere 4066M Tractor
Manufacturer:John Deere
Price:38,266(USD)
Series:4M Series
Model:4066M
Equipment Type: Compact Utility Tractors
Factory:Augusta, Georgia, USA
Full Specifications
KEY SPECS
- Engine power (gross)
- 48.5 kW/65.9 hp/PS at 2600 rpm/SAE J1995 rated power
- Power take-off (PTO) power
- PRT - 40.4 kW/54.2 hp/eHST - 38.7 kW/51.9 hp/Per SAE J1995
- Steering hydraulics
- 23.5 L/min/6.2 gpm
- Implement hydraulics
- 42.3 L/min/11.2 gpm
- Hitch type
- Category 1
- Lift capacity, 24-in. behind link arms
- 1135 kg/2500 lb
- Standard transmission; forward/reverse
- PowrReverser transmission (PRT)
- Cruise control
- Optional
- Approximate shipping weight (open-station; cab)
- Open operator station (OOS) - 1710 kg/3770 lb/Cab - 2120 kg/4675
- Wheelbase
- 185.5 cm/73 in.
ENGINE
- Family
- EYDXL2.09HDA/FYDXL2.09HDA/GYDXL2.09HDA
- Manufacturer
- Yanmar
- Engine model
- 4TNV86CHT-MJT
- Engine power (gross)
- 48.5 kW/65.9 hp/PS at 2600 rpm/SAE J1995 rated power
- Power take-off (PTO) power
- PRT - 40.4 kW/54.2 hp/eHST - 38.7 kW/51.9 hp/Per SAE J1995
- Rated engine speed
- 2600 rpm
- Type
- Diesel
- Injection pump type
- High pressure common rail direct injection
- Aspiration
- Turbocharged and charge air cooled
- Emissions compliance
- Final Tier 4
- Cylinders/displacement
- 4 / 2.091 L/4 / 127.6 cu in.
- Number of cylinders
- Four
- Cylinder liners
- Cast-in-block
- Bore and stroke
- 86 x 90 mm/3.4 x 3.54 in.
- Compression ratio
- 19.1:1
- Lubrication
- Pressurized
- Cooling system
- Liquid
- Air cleaner
- Dual element
- Engine torque at rated speed
- 178 Nm/131.3 lb-ft
- Fuel tank capacity
- 56.9 L/15 U.S. gal./Cab - 50 L/13.8 U.S. gal.
ELECTRICAL
- Battery size
- 770 CCA
- Alternator (12-V)
- 75 amp
- Starter size
- 2 kW/2.68 hp
FUEL SYSTEM
- Type
- High pressure common rail direct injection
TRANSMISSION
- Standard transmission; forward/reverse
- 12/12 PowrReverser transmission (PRT)
- Optional transmission; forward/reverse
- eHydro transmission (eHST)
- Left-hand reverser
- PRT only
- Final drive
- Planetary
- Brakes
- Multi-plate wet disc
- Steering
- Hydrostatic power steering
- Clutch, wet/dry
- Wet
- Clutch disk diameter wet clutch
- 129 mm/5.08 in.
- Axle capacity
- Front/1600 kg/3528 lb/Rear/2400 kg/5292 lb/
- Creeper
- No
- Cruise control
- Optional
- Differential lock
- Yes
HYDRAULICS
- Type
- Open center
- Pump rated output
- Steering/21.5 L/min/5.7 gpm/Implement/38.7 L/min/10.2 gpm/65.86617 L/min/17.4 gpm
- Pump type
- Dual gear
- Draft control sensing
- Position control
- Remote control valves available
- Up to six rear remotes
3-POINT HITCH
- Type
- Category 1
- Lift capacity, 24-in. behind link arms
- 1135 kg/2500 lb
POWER TAKE-OFF (PTO)
- Standard
- Independent 540 rpm at 2600 rpm
- Control
- Independent
- Clutch
- Wet disc
FLUID CAPACITIES
- Crankcase with filter
- 5.3 L/1.4 qt
- Transmission and hydraulic system
- 47.3 L/12.5 gal.
FINAL DRIVE
- Type
- Planetary
- Differential lock
- Yes
OPERATOR STATION
- Rollover protective structure
- Type/Fixed/Yes
- Platform - flat/straddle
- Flat
- Gear shift location - console/floor
- PRT - Left-hand side
DIMENSIONS
- Wheelbase
- 185.5 cm/73 in.
- Front axle clearance
- 35.1 cm/13.8 in.
- Turning radius with brakes
- 2.8 m/9.19 ft
- Turning radius without brakes
- 3 m/9.84 ft
- Approximate shipping weight (open-station; cab)
- Open operator station (OOS) - 1710 kg/3770 lb/Cab - 2120 kg/4675 lb
TIRES
- Front
- Farm - 8-16/Turf - 27x10.5-15/Industrial - 10-16.5
- Rear
- Farm - 14.9-24/Turf - 44x18-20 or 22.5LL-16.1/Industrial - 16.9Lx24
- Front tread range
- 148.1 cm/58.3 in.
- Rear tread spacing
- 137.2 cm/54 in.
About John Deere Tractor
The John Deere 4066M tractor is part of the company's 4M Series. The 4066M is a Compact Utility Tractors type, which is used mainly in Agriculture Tractors. The 4066M tractor features a 54.2 horsepower engine. This setting improves usability in the real world.
