The SyncShift transmission is operated via a gear shift lever and range shift lever. The tractor must be stopped, and clutch used, to change ranges. Gear shifts, within a range, may be made on the move using the clutch
SPEEDS 1
Description
With 13.6-24 rear tires
TRANSMISSION 2
Transmission
Power Reverser
Gears
12 forward and reverse
Oil capacity
38.8qts / 36.7L
SPEEDS 2
Description
With 13.6-24 rear tires
MECHANICAL
Chassis
4x2 2WD/4x4 MFWD 4WD
Steering
power
Brakes
wet disc
Cab
Platform with ROPS
Transmissions
9-speed partially synchronized 12-speed
CAPACITY
Fuel
12.5gal / 47.3L
Hydraulic system
9.7gal / 36.7L
Front axle
5.2qts / 4.9L
HYDRAULICS
Type
open center
Capacity
9.7gal / 36.7L
Pressure
2500psi / 172.4bar
Pump flow
10.6gpm / 40.1lpm
Total flow
15.9gpm / 60.2lpm
Steering flow
5.3gpm / 20.1lpm
TRACTOR HITCH
Rear Type
I
Rear lift
2,500lbs / 1134kg
POWER TAKE-OFF (PTO)
Rear PTO
independent
Rear RPM
540
Mid PTO
optional
Mid RPM
2100
JOHN DEERE 4510 TIRES
Ag front
6.00-16 (2WD) / 7.00-16 (4WD) / 8.00-16 (4WD)
Ag rear
13.6-24/14.9-24
Lawn/turf front
27x10.5-15/27x12LL-15 (4WD)
Lawn/turf rear
44x18.00-20/22.5LL-16.1
Industrial front
10.00-16.5 (4WD)
Industrial rear
17.5L-24
DIMENSIONS
Wheelbase
71.5inches / 181cm
Length
135inches / 342cm
Width
62inches / 157cm (min)
Shiping weight
3,450lbs / 1564kg
JOHN DEERE 4510 HEIGHT
Hood
51inches / 129cm
ROPS
91.6inches / 232cm 97.6inches / 247cm (folding)
DIMENSIONS & TIRES
Wheelbase
71.5inches / 181cm
Weight
3,450lbs / 1564kg
Front tire
6.00-16
Rear tire
13.6-24
ATTACHMENT OVERVIEW
Description
72
72
Type
mid-mount John Deere 3-blade
Cutting width
72inches / 182cm
JOHN DEERE 460 LOADER
Height (to pin)
112inches / 284cm
Clearance, dumped bucket
89inches / 226cm
Dump reach
27inches / 68cm
Dump angle
45°
Reach at ground
62inches / 157cm
Rollback angle
30°
Breakout force (at pin)
3863lbs / 1752kg
Breakout force (at 500mm)
2929lbs / 1328kg
Lift to full height (at pin)
2330lbs / 1056kg
Lift to full height (at 500mm)
1705lbs / 773kg
Raise time to height
4.8 s
Bucket dump time
2.2 s
Lowering time
3.3 s
Rollback time
2.5 s
4510 SERIAL NUMBERS
Location
Serial number plate on the right side of the tractor frame, above the front axle
ELECTRICAL
Ground
negative
Charging system
alternator
Charging amps
40
Battery CCA
690
Battery volts
12
About John Deere Tractor
The John Deere 4510 tractor is part of the 9R tractor series. The 4510 is a Compact Utility Tractors type, that is used mainly in Agriculture Tractors. The 4510 tractor is powered by a engine. This configuration gives better real-world usability.