John Deere 5225 Tractor (2008)
Manufacturer:John Deere
Price:N/A
Series:5025 Series
Model:5225
Equipment Type: Utility Tractors
Factory:Augusta, Georgia, USA
Full Specifications
NEBRASKA TRACTOR TEST 1866 2
- Description
- Diesel 9-speed 4WD November 21 - 23, 2005 Link: Nebraska Tractor Test 1866 file PTO performance
- Max power
- 47.59hp / 35.5kW
- Fuel use
- 3.4gal/hour / 12.9l/hour
- Power at rated engine speed
- 46.20hp / 34.5kW
JOHN DEERE 5225 POWER
- Engine (gross)
- 56hp / 41.8kW
- PTO (claimed)
- 45hp / 33.6kW
- PTO (tested)
- 47.59hp / 35.5kW
ENGINE DETAIL
- Description
- John Deere turbocharged diesel 5-cylinder liquid-cooled
- Displacement
- 186.1ci / 3.1L
- Bore/Stroke
- 3.385x4.134inches / 86x 105mm
- Emissions
- Tier II
- Power (gross)
- 56hp / 41.8kW
- Air cleaner
- paper and felt elements
- Compression
- 20.5:1
- Rated RPM
- 2400
- Idle RPM
- 900-2625
- Operating RPM
- 1600-2400
- Starter volts
- 12
- Coolant capacity
- 10qts / 9.5L
ENGINE OIL
- Oil capacity
- 11qts / 10.4L
JOHN DEERE 5225 ENGINE
- Description
- John Deere 3.1L 5-cyl diesel
TRANSMISSIONS OVERVIEW
- Description
- 9-speed partially synchronized 12-speed power shuttle 24-speed two-speed power shift
TRANSMISSION 1
- Transmission
- John Deere SyncShuttle
- Type
- partially synchronized
- Gears
- 9 forward and 3 reverse
- Clutch
- dry disc
- Oil capacity
- 41.2qts / 39.0L
- 122o↔-10oF [50o↔-23oC]
- Hy-Gard
- 86o↔-40oF [30o↔-40oC]
- Low-Viscosity Hy-Gard
- Description
- Three gears (1-3) plus reverse in three ranges (A-C). Gears may be shifted on the move using the clutch. Tractor must be stopped, and clutch used, to shift ranges
SPEEDS 1
- Description
- With 16.9-30 rear tires
TRANSMISSION 2
- Transmission
- John Deere PowrReverser
- Type
- power shuttle
- Gears
- 12 forward and reverse
- Clutch
- wet disc
- Oil capacity
- 46qts / 43.5L
- 122o↔-10oF [50o↔-23oC]
- Hy-Gard
- 86o↔-40oF [30o↔-40oC]
- Low-Viscosity Hy-Gard
- Description
- Four gears (1-4) in three ranges (A-C) with reverser lever. Direction may be changed without using the clutch. Gear shifts are synchronized using the clutch. Tractor must be stopped to shift ranges
SPEEDS 2
- Description
- With 16.9-30 rear tires
TRANSMISSION 3
- Transmission
- John Deere PowrReverser Hi/Lo
- Type
- two-speed power shift
- Gears
- 24 forward and reverse
- Clutch
- wet disc
- Description
- Adds a push-button high-low power shift to the PowrReverser transmission. Gear shifts are synchronized using the clutch. Tractor must be stopped to shift ranges
SPEEDS 3
- Description
- With 16.90-30 rear tires. Reverse speeds are 10% faster than forward speeds
MECHANICAL
- Chassis
- 4x2 2WD/4x4 MFWD 4WD
- Final drives
- inboard planetary
- Differential lock
- mechanical rear
- Steering
- power
- Brakes
- differential hydraulic wet disc
- Cab
- Open operator station with two-post folding ROPS. Optional isolated flat-platform (IOOS). Cab available with air-conditioning
- Transmissions
- 9-speed partially synchronized 12-speed power shuttle 24-speed two-speed power shift
CAPACITY
- Fuel
- 25gal / 94.6L (straddle) 33.5gal / 126.8L (IOOS/cab)
- Hydraulic system
- 10.3gal / 39.0L (9-speed) 11.5gal / 43.5L (12-speed)
- Front hubs
- 0.74qts / 0.7L *Each
- Front diff.
- 4.8qts / 4.5L
HYDRAULICS
- Type
- open center
- Capacity
- 10.3gal / 39.0L (9-speed) 11.5gal / 43.5L (12-speed)
- Pressure
- 2828psi / 195.0bar
- Rear valves
- 1 to 3
- Mid valves
- 0, 2 or 3
- Pump flow
- 13.5gpm / 51.1lpm
- Total flow
- 19.4gpm / 73.4lpm
- Steering flow
- 5.9gpm / 22.3lpm
- Steering press.
- 1957psi / 134.9bar
TRACTOR HITCH
- Rear Type
- II/I
- Control
- top-link draft sensing
- Rear lift (at 24
- 3374lbs / 1530kg
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Clutch
- dry disc/electro-hydraulic wet disc (24-speed)
- Rear RPM
- 540/540/540E/540/1000 field conversion kit
- Engine RPM
- 540@2400 / 540E@1700
JOHN DEERE 5225 TIRES
- 2WD Standard tires (ag)
- Front: 6.50-16. Rear: 13.6-28
- 4WD Standard tires (ag)
- Front: 8.3-24. Rear: 13.6-28
DIMENSIONS
- Wheelbase
- 85.7inches / 217cm
- 2WD Length
- 136.9inches / 347cm
- 4WD Length
- 141.6inches / 359cm
- 2WD Clearance (front axle)
- 18inches / 45cm
- 4WD Clearance (front axle)
- 15.8inches / 40cm
- Clearance (drawbar)
- 15inches / 38cm
- Rear axle
- Flange: 57.3 inch length /1455 mm
JOHN DEERE 5225 WEIGHT
- Shipping
- 5350lbs / 2426kg (2WD straddle) 5935lbs / 2692kg (4WD straddle) 5485lbs / 2487kg (2WD IOOS) 6030lbs / 2735kg (4WD IOOS)/5995lbs / 2719kg (2WD cab) 6580lbs / 2984kg (4WD cab)
- 4WD ROPS Operating
- 5650lbs / 2562kg
- Max Drawbar
- 1675lbs / 759kg (extended) 2470lbs / 1120kg (retracted)
JOHN DEERE 5225 HEIGHT
- Steering wheel
- 62.7inches / 159cm (straddle) 69.2inches / 175cm (IOOS)
- 2WD Hood
- 53inches / 134cm
- 4WD Hood
- 53.6inches / 136cm
- ROPS
- 93.9inches / 238cm (straddle) 101.7inches / 258cm (IOOS)
- Cab
- 95.9inches / 243cm
- Exhaust
- 88.5inches / 224cm (straddle) 87.3inches / 221cm (IOOS)
DIMENSIONS & TIRES
- Wheelbase
- 85.7inches / 217cm
- Weight
- 5350 to 6580 pounds
- Front tire
- 6.50-16
- 2WD Rear tire
- 13.6-28
ATTACHMENT OVERVIEW
- Description
- Front-end loader Backhoe
JOHN DEERE 512 LOADER
- Height (to pin)
- 112.5inches / 285cm
- Clearance, dumped bucket
- 82inches / 208cm
- Dump angle
- 43°
- Clearance, level bucket
- 103inches / 261cm
- Reach at ground
- 60inches / 152cm
- Breakout force (at pin)
- 4451lbs / 2018kg
- Breakout force (at 800mm)
- 2944lbs / 1335kg
- Lift to full height (at pin)
- 2200lbs / 997kg
- Lift to full height (at 800mm)
- 1500lbs / 680kg
- Lift to 1.5m (at pin)
- 3043lbs / 1380kg
- Lift to 1.5m (at 800mm)
- 2161lbs / 980kg
- Bucket width
- 73inches / 185cm
JOHN DEERE 522 LOADER
- Height (to pin)
- 122inches / 309cm
- Clearance, dumped bucket
- 100inches / 254cm
- Dump reach
- 12.3inches / 31cm
- Dump angle
- 32°
- Clearance, level bucket
- 114.5inches / 290cm
- Reach at ground
- 66inches / 167cm
- Breakout force (at pin)
- 5598lbs / 2539kg
- Breakout force (at 800mm)
- 3732lbs / 1692kg
- Lift to full height (at pin)
- 2731lbs / 1238kg
- Lift to full height (at 800mm)
- 1741lbs / 789kg
- Lift to 1.5m (at pin)
- 3717lbs / 1686kg
- Lift to 1.5m (at 800mm)
- 2661lbs / 1207kg
- Bucket width
- 73inches / 185cm
JOHN DEERE 542 LOADER
- Height (to pin)
- 128inches / 325cm
- Clearance, dumped bucket
- 91inches / 231cm
- Dump reach
- 42inches / 106cm
- Dump angle
- 69°
- Clearance, level bucket
- 118inches / 299cm
- Reach at ground
- 84inches / 213cm
- Breakout force (at pin)
- 3484lbs / 1580kg
- Breakout force (at 800mm)
- 3889lbs / 1764kg
- Lift to full height (at pin)
- 3093lbs / 1402kg
- Lift to full height (at 800mm)
- 2134lbs / 967kg
- Lift to 1.5m (at pin)
- 4130lbs / 1873kg
- Lift to 1.5m (at 800mm)
- 2976lbs / 1349kg
- Bucket width
- 73inches / 185cm
JOHN DEERE 542SL LOADER
- Height (to pin)
- 130inches / 330cm
- Clearance, dumped bucket
- 93.6inches / 237cm
- Dump reach
- 36.6inches / 92cm
- Dump angle
- 73°
- Clearance, level bucket
- 121inches / 307cm
- Reach at ground
- 84inches / 213cm
- Breakout force (at pin)
- 4137lbs / 1876kg
- Breakout force (at 800mm)
- 4698lbs / 2131kg
- Lift to full height (at pin)
- 3214lbs / 1457kg
- Lift to full height (at 500mm)
- 2381lbs / 1080kg
- Lift to 1.5m (at pin)
- 3969lbs / 1800kg
- Lift to 1.5m (at 800mm)
- 3836lbs / 1740kg
- Bucket width
- 73inches / 185cm
JOHN DEERE 49 BACKHOE
- Backhoe type
- John Deere 49 Backhoe
- Transport height
- 94inches / 238cm
- Bucket width
- 14inches / 35cm 18inches / 45cm 24inches / 60cm 36inches / 91cm 40inches / 101cm
- 2-Foot flat digging depth
- 115inches / 292cm
- Reach from pivot
- 149inches / 378cm
- Loading height
- 92inches / 233cm
- Bucket Rotation
- 180
- Swing Arc
- 180
- Bucket force
- 4575lbs / 2075kg
- Dipperstick force
- 3175lbs / 1440kg
5225 SERIAL NUMBERS
- Location
- Left side of tractor frame above the front axle
- 2005
- 120001
- 2006
- 220001
- 2007
- 320001
- 2008
- 420001
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- ROPS Charging amps
- 70
- Cab Charging amps
- 90
- Battery CCA
- 950
- Battery volts
- 12
- Battery Group
- BCI 31
About John Deere Tractor
The 5225 model tractor belongs to the John Deere 5025 Series. The 5225 is a kind of Utility Tractors and that is often used for Agriculture Tractors operations. The 5225 tractor is operated by a engine. This configuration offers better real-world usability.
Utility Tractors
