John Deere 5510 Tractor (2002)
Manufacturer:John Deere
Price:N/A
Series:5000 Ten Series
Model:5510
Equipment Type: Utility Tractors
Factory:None
Full Specifications
JOHN DEERE 5510 POWER
- Engine (net)
- 80 hp/59.7 kW
ENGINE DETAIL
- Description
- John Deere 4045TAT50/turbocharged/4-cylinder/liquid-cooled
- Displacement
- 274.6 ci/4.5 L
- Bore/Stroke
- 4.19x5.00 inches/106 x 127 mm
- Rated Power (ECE R24)
- 80 hp/59.7 kW
- Compression
- 17.0:1
- Rated RPM
- 2300
- Idle RPM
- 800-2510
- Operating RPM
- 1500-2300
- Torque
- 231.6 lb-ft/314.0 Nm
- Torque RPM
- 1500
- Firing order
- 1-3-4-2
- Starter
- electric
- Starter volts
- 12
- Starter power
- 4 hp/3.0 kW
- Oil capacity
- 8.5 qts/8.0 L
- ROPS Coolant capacity
- 12.6 qts/11.9 L
- Cab Coolant capacity
- 13.7 qts/13.0 L
JOHN DEERE 5510 ENGINE
- Description
- John Deere 4.5L 4-cyl
TRANSMISSIONS OVERVIEW
- Description
- 12-speed partially synchronized/24-speed partially synchronized/24-speed two-speed power shift
TRANSMISSION 1
- Type
- partially synchronized
- Gears
- 12 forward and reverse
- Description
- Four gears (1-4) in three ranges (A, B, C) with reverse lever. Gear shifts are synchronized, using the clutch. Tractor must be stopped, and clutch used, to shift range or direction.
SPEEDS 1
- Description
- With 16.9-30 rear tires. Reverse speeds are 15% slower than forward./
TRANSMISSION 2
- Type
- partially synchronized
- Gears
- 24 forward and reverse
- Description
- Four gears (1-4) in three ranges (A, B, C) with reverse lever and Hi-Lo shift. Gear shifts are synchronized, using the clutch. Tractor must be stopped, and clutch used, to shift range, direction, or Hi-Lo.
SPEEDS 2
- Description
- With 16.9-30 rear tires. Reverse speeds are 15% slower than forward./
TRANSMISSION 3
- Type
- two-speed power shift
- Gears
- 24 forward and reverse
- Description
- Four gears (1-4) in three ranges (A, B, C) with reverse lever and push-button Electro-Hydraulic Hi-Lo. Gear shifts are synchronized, using the clutch. Tractor must be stopped, and clutch used, to shift range ordirection.
SPEEDS 3
- Description
- With 16.9-30 rear tires. Reverse speeds are 15% slower than forward./
MECHANICAL
- Chassis
- 4x2 2WD/4x4 MFWD 4WD
- Differential lock
- mechanical rear
- Steering
- hydrostatic power
- Brakes
- wet disc
- Trailer brakes
- hydraulic
- Cab
- Cab standard.
- Transmissions
- 12-speed partially synchronized/24-speed partially synchronized/24-speed two-speed power shift
CAPACITY
- Fuel
- 21.1 gal/79.9 L
- 2WD Hydraulic system
- 9.5 gal/36.0 L
- 4WD 12-Speed Hydraulic system
- 10 gal/37.9 L
- 4WD 24-Speed Hydraulic system
- 11.4 gal/43.1 L
HYDRAULICS
- Type
- open center
- 2WD Capacity
- 9.5 gal/36.0 L
- 4WD 12-Speed Capacity
- 10 gal/37.9 L
- 4WD 24-Speed Capacity
- 11.4 gal/43.1 L
- Pump flow
- 12.4 gpm/46.9 lpm/18.8 gpm/71.2 lpm
- Steering flow
- 6.5 gpm/24.6 lpm
TRACTOR HITCH
- Rear Type
- II/I
- Control
- position and draft control
- Rear lift
- 5395 lbs/2447 kg
POWER TAKE-OFF (PTO)
- Rear RPM
- 540/540E/540/1000
- Engine RPM
- 540@1938/540E@1648/1000@1962
JOHN DEERE 5510 TIRES
- 2WD Standard tires (ag)
- Front: 7.50-16. Rear: 16.9R30
- 4WD Standard tires (ag)
- Front: 11.2R24. Rear: 16.9R30
DIMENSIONS
- Wheelbase
- 85.8 inches/217 cm
- Length
- 132 inches/335 cm
- Height (cab)
- 94.5 inches/240 cm
- Weight
- 7050 lbs/3197 kg
DIMENSIONS & TIRES
- Wheelbase
- 85.8 inches/217 cm
- Weight
- 7050 lbs/3197 kg
- Front tire
- 7.50-16
- 2WD Rear tire
- 16.9R30
5510 SERIAL NUMBERS
- Location
- Serial number plate on left side of frame, above the front axle.
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- ROPS Charging amps
- 40
- Cab Charging amps
- 65
- Battery volts
- 12
- Battery AH
- 100
About John Deere Tractor
The 5510 model tractor belongs to the John Deere 5000 Ten Series. The 5510 is classified as a Utility Tractors and that is often used for Agriculture Tractors activities. The 5510 tractor has a 80 horsepower engine. This setting optimizes real-world applicability.
