Full Specifications
KEY SPECS
Engine description
John Deere PowerTech PSS
Engine displacement
4.5 L/275 cu in.
Rated engine power
107 kW/145 hp
Maximum engine power
118 kW/161 hp
Rated PTO power (hp SAE)
85 kW/116 hp
Maximum PTO power
At 1000 PTO rpm: 94 kW/128 hp
Transmission type
Standard: John Deere 24-speed PowrQuad Plus 40 km/h/Optional: John Deere 16-speed PowrQuad Plus 30 km/h/John Deere 24-speed AutoQuad Plus 40 km/h/John Deere 24-speed CommandQuad Plus 40 km/h/Creeper (PowrQuad Plus and AutoQuad Plus)
Hydraulic pump rated output
Standard: 45-cc pump: 114 L/min/30 gpm
Rear hitch category (SAE designation)
3N
Base machine weight
6200 kg/13,668 lb
ENGINE SPECIFICATIONS
Description
John Deere PowerTech PSS
Engine type
4045HL556
Engine family
JDXL06.8324
Rated speed
2100 rpm
Aspiration
Dual turbochargers, variable geometry turbo with fixed geometry turbo in series
Emission level
Stage V
After treatment type
Lifetime diesel particle filter (DPF), diesel oxidation catalyst (DOC) and selective catalytic reduction (SCR) using diesel exhuast fluid (DEF)
Displacement
4.5 L/275 cu in.
ENGINE PERFORMANCE
Rated power
107 kW/145 hp
Rated PTO power (hp SAE)
85 kW/116 hp
Maximum PTO power
At 1000 PTO rpm: 94 kW/128 hp
Power boost
10 percent
Maximum engine power
118 kW/161 hp
Engine peak torque
At 1600 U/min: 680 Nm/501.54 lb-ft
PTO torque rise
40 percent
TRANSMISSION
Type
Standard: John Deere 24-speed PowrQuad Plus 40 km/h/Optional: John Deere 16-speed PowrQuad Plus 30 km/h/John Deere 24-speed AutoQuad Plus 40 km/h/John Deere 24-speed CommandQuad Plus 40 km/h/Creeper (PowrQuad Plus and AutoQuad Plus)
Reverser
Electronic left-hand reverser
Creeper
Optional
HYDRAULIC SYSTEM
Type
Standard: Pressure-and-flow compensated (PFC) system with Load Sensing function
Pump rated output
Standard: 45-cc pump: 114 L/min/30 gpm
Number of rear selective control valves (SCVs)
Standard: Two ISO couplers/Optional: Two to four ISO couplers
Number of mid selective control valves (SCVs)
Up to three
Joystick SCV control
Mechanical/electrical
REAR HITCH
Remote control valves available
Standard
Hitch category (SAE designation)
3N
Maximum lift capacity behind lift points
Standard: 5000 kg/11,023.1 lb/Optional: 5700 kg/12,566.3 lb
Sensing type
Electronic lower link
Rear axle differential lock
Electrohydraulically with oil-cooled clutch
DRAWBAR
Drawbar category
Category 2
Maximum vertical load
Road/field use (250-mm extended): 2000 kg/4409.2 lb/Field use (350-mm extended): 1400 kg/3086.5 lb/Field use (400-mm extended): 1200 kg/2645.5 lb
REAR POWER TAKE-OFF (PTO)
Type
Electrohydraulically operated, oil-cooled, multi-disc design/Standard: 38 mm (1.496 in.) 540, 1000 reversible shaft
Engine rpm (at rated PTO speeds)
540:1977 rpm/1000: 1972 rpm
PTO actuation
In-cab switch and external fender-mounted remote control
FRONT HITCH
Category
3N
Electric power
Seven-pin electrical socket
Standard lift capacity
4400 kg/9700.3 lb
Front power take-off (PTO)
Electrohydraulically engaged with oil-cooled, multi-disc design
PTO speed
1000 PTO: 1969 rpm
REAR AXLE
Type
Standard: Flange-type rear axle/Optional: Rack-and-pinion rear axle - 86-mm (3.86-in.) shaft (2.438-m/8-ft length)
Final drive type
Three planetary gear reduction
Brakes, type and control
Primary brake (footbrake): Oil-cooled self-equalizing, self-adjusting, hydraulically actuated/Secondary brake: Hydraulically actuated, integrated into primary brake (lever on left-hand side of operator seat)/Park lock: Mechanical transmission park lock/Mechanical front-wheel drive (MFWD) braking: Automatic MFWD engagement (MFWD engaged for braking at speeds less than 5 km/h [3.1 mph])/Front axle brakes (optional): TLS with front axle brakes (oil cooled, self-equalizing, self-adjusting, hydraulically actuated)
Rear differential lock
Electrohydraulically with oil-cooled clutch
FRONT AXLE
Type
Standard: MFWD/Optional: Two-wheel drive (2WD)/Triple-Link Suspension (TLS) MFWD axle (hydro-pneumatic, permanently active, triple link, self-leveling suspension with 100-mm [3.9-in.] suspension range)/Triple-Link Suspension MFWD with brakes
Front axle differential lock
Self-locking differential
TIRES
Front
540/65R28 (144)
Rear
650/65R38 (185)
STEERING
Type
Dynamic load sensing, hydrostatic, flow metering
ELECTRICAL SYSTEM
Alternator size
Standard: 14 V/120 amp/Optional: 14 V/150 amp/14 V/200 amp
Battery options
Standard: 12 V/154 amp-hr/Optional: 12 V/174 amp-hr
OPERATOR STATION
Rollover protective structure, OOS
Gearshift location - console/floor/Console/
Seat
Standard: Economy seat with mechanical suspension/Optional: Standard seat with air suspension
Cab suspension
Optional: Mechanical Cab Suspension (MCS)
Instructional seat
Optional
Display
Cornerpost dispay (right-hand A-post)/Functionalty: Performance monitor and individual settings
Radio
Optional integrated
Inner cab volume
2.73 m3/96.41 cu ft
dB(A) rating
70 dBA
Cab glass area
Without roof hatch or panoramic roof: 4.85 m2/52.2 sq ft
DIMENSIONS
Wheelbase
2765 mm/108.9 in.
Overall width
2490 mm/98.03 in.
Overall length
4730 mm/186.2 in.
Overall height
2990 mm/117.72 in.
Front axle center
Ground clearance: 530 mm/20.9 in.
Approximate shipping weight, Open;Cab
Cab: 6200 kg/13,668 lb
WEIGHT
Base machine weight
Front axle/2300 kg/5070 lb/Rear axle/3900 kg/8598 lb//6200 kg/13,668 lb
Maximum permissible weight
10,450 kg/23,038 lb
CAPACITIES
Crankcase oil volume
16 L/4.2 U.S. gal.
Fuel tank
270 L/71.3 U.S. gal.
Diesel exhaust fluid (DEF) tank
16 L/4.2 U.S. gal.
Cooling system
27 L/7.1 U.S. gal.
Transmission-hydraulic system
PowrQuad Plus/AutoQuad Plus: 60 L/15.9 U.S. gal.
SERVICEABILITY
Interval for engine oil change
500 hours
Interval for hydraulic/transmission oil change
1500 hours
Interval for engine coolant change
6000 hours
LOADERS
Loader
660R
Lift capacity at full height
Non-self-leveling (NSL): 2564 kg/5652.65 lb/Mechanical self-leveling (MSL): 2301 kg/5072.83 lb
Maximum lift height
NSL/MSL: 4.52 m/177.95 in.
PRECISION AG
Guidance
Optional: AutoTrac on cornerpost display (straight track only), AutoTrac with 4240/4640 Universal Display
Telematic
Optional: JDLink
Remote diagnostics
Optional: JDLink
MISCELLANEOUS
Country of manufacture
Germany
ADDITIONAL INFORMATION
Date collected
19-Mar-20
The 6145M model tractor is one of John Deere's 9R line of tractors. The 6145M is a kind of Row-Crop Tractors and that is often used for Agriculture Tractors production. The 6145M tractor is operated by a 116 horsepower engine. This configuration provides better real-world usability.