John Deere 7130 Tractor (2011)

Manufacturer:John Deere

Price:N/A

Series:7030 Small-Frame Series

Model:7130

Equipment Type: Row-Crop Tractors

Factory:Mannheim, Baden-Württemberg, Germany

Full Specifications

JOHN DEERE 7130 POWER

Engine (gross): 125hp / 93.2kW
PTO (claimed): 100hp / 74.6kW

ENGINES OVERVIEW

Description: John Deere 6.8L 6-cyl diesel John Deere 4.5L 4-cyl diesel

ENGINE DETAIL 1

Description: John Deere 6068HL280 turbocharged diesel 6-cylinder 12-valve liquid-cooled
Displacement: 414.4ci / 6.8L
Bore/Stroke: 4.19x5.00inches / 106x 127mm
Emissions: Tier III
Rated Power (EC 97/98): 121hp / 90.2kW
Air cleaner: dual paper elements
Rated RPM: 2300
Idle RPM: 850-2460
Operating RPM: 1600-2300
Torque: 358lb-ft / 485.4Nm
Torque RPM: 1500
Firing order: 1-5-3-6-2-4
Starter volts: 12
Starter power: 4hp / 3.0kW
Oil capacity: 20.8qts / 19.7L
Intake valve clearance: 0.014inches / 0.356mm
Exhaust valve clearance: 0.018inches / 0.457mm

ENGINE DETAIL 2

Description: John Deere Power Tech E 4045HL288 turbocharged diesel 4-cylinder 8-valve liquid-cooled, The Deere 7130 switched to a four-cylinder engine with the 2010 model year
Displacement: 276ci / 4.5L
Bore/Stroke: 4.19x5.00inches / 106x 127mm
Emissions: Tier III
Rated Power (EC 97/98): 125hp / 93.2kW
Fuel system: high-pressure common rail
Air cleaner: dual paper elements
Compression: 19:1
Rated RPM: 2300
Idle RPM: 850-2460
Operating RPM: 1600-2300
Torque: 372lb-ft / 504.4Nm
Torque RPM: 1600
Firing order: 1-3-4-2
Starter volts: 12
Starter power: 4hp / 3.0kW
Oil capacity: 16.8qts / 15.9L
Intake valve clearance: 0.014inches / 0.356mm
Exhaust valve clearance: 0.018inches / 0.457mm

JOHN DEERE 7130 ENGINES

Description: John Deere 6.8L 6-cyl diesel John Deere 4.5L 4-cyl diesel

TRANSMISSIONS OVERVIEW

Description: 12-speed full synchro shift 16-speed full synchro shift 16-speed partial power shift 24-speed partial power shift

TRANSMISSION 1

Transmission: John Deere SyncroPlus
Type: full synchro shift
Gears: 12 forward and 4 reverse
Oil capacity: 54.8qts / 51.9L
Description: Four ranges, each with four forward gears and reverse operated via a range shift lever and gear shift lever. Cluch must be used to change range or gear. Only available with ROPS

SPEEDS 1

Description: With 18.4R38 rear tires

TRANSMISSION 2

Transmission: John Deere SyncroPlus Power Reverser
Type: full synchro shift
Gears: 16 forward and reverse
Oil capacity: 54.8qts / 51.9L
Description: Four ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range or gear

SPEEDS 2

Description: With 18.4R38 rear tires

TRANSMISSION 3

Transmission: John Deere PowrQuad
Type: partial power shift
Gears: 16 forward and reverse
Oil capacity: 54.8qts / 51.9L
Description: Four ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change

SPEEDS 3

Description: With 18.4R38 rear tires

TRANSMISSION 4

Transmission: John Deere PowrQuad
Type: partial power shift
Gears: 24 forward and reverse
Oil capacity: 54.8qts / 51.9L
Description: Six ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change

SPEEDS 4

Description: With 18.4R38 rear tires. Reverse speeds are approximately 5% faster than listed forward speeds

MECHANICAL

Chassis: 4x2 2WD/4x4 MFWD 4WD (optional)
Steering: hydrostatic power
Brakes: differential hydraulic wet disc
Cab: Two-post Roll-Gard ROPS. Cab optional
Transmissions: 12-speed full synchro shift 16-speed full synchro shift 16-speed partial power shift 24-speed partial power shift

CAPACITY

Fuel: 54.7gal / 207.0L 66gal / 249.8L (optional)
Hydraulic system: 13.7gal / 51.9L 15.9gal / 60.2L
Front axle: 8.8qts / 8.3L
Front hubs: 1.6qts / 1.5L

HYDRAULICS

Type: constant flow load sensing closed-center load sensing (optional with ROPS)
Capacity: 13.7gal / 51.9L 15.9gal / 60.2L
Pressure: 2900psi / 200.0bar
Valves: 1 to 4
Pump flow: 21.1gpm / 79.9lpm 29gpm / 109.8lpm (optional with ROPS)

TRACTOR HITCH

Rear Type: II
Control: position control electronic lower-link (optional with ROPS)
Rear lift (at 24: 5,915lbs / 2683kg

POWER TAKE-OFF (PTO)

Rear PTO: independent
Rear RPM: 540/1000

JOHN DEERE 7130 TIRES

Standard tires (ag): Front: 10.00-16. Rear: 18.4R38 (2WD) Front: 14.9R24. Rear: 18.4R38 (4WD)

DIMENSIONS

Wheelbase: 106.3inches / 270cm (2WD) 104.3inches / 264cm
Length: 187.3inches / 475cm
Width: 65.5inches / 166cm (flange axle ends)
Clearance (front axle): 21.6inches / 54cm (2WD) 23inches / 58cm (4WD)
Clearance (rear axle): 28.2inches / 71cm
Clearance (drawbar): 19inches / 48cm
Rear axle: 3.1 by 100.6inches / 78by 2555mm
Front tread: 59.4 to 88inches / 150to 223cm (4WD)
Rear tread: 63.5 to 72.5inches / 161to 184cm

JOHN DEERE 7130 WEIGHT

Shipping: 9,657lbs / 4380kg (2WD) 10,252lbs / 4650kg (4WD)
Operating: 12,340lbs / 5597kg
Max capacity: 18,740lbs / 8500kg
Max Drawbar: 4,960lbs / 2249kg
Max front axle: 4,520lbs / 2050kg (2WD) 9,260lbs / 4200kg (4WD) 11,025lbs / 5000kg (2WD with loader) 14,505lbs / 6579kg (4WD with loader)
Max rear axle: 14,330lbs / 6500kg

JOHN DEERE 7130 HEIGHT

ROPS: 115.2inches / 292cm 90.8inches / 230cm (folded)
Cab: 114.4inches / 290cm

DIMENSIONS & TIRES

Wheelbase: 106.3inches / 270cm (2WD) 104.3inches / 264cm
Weight: 9657 to 12340 pounds
Front tire: 10.00-16
Rear tire: 18.4R38 (2WD)

7130 SERIAL NUMBERS

Location: Right side of main frame above front axle

ELECTRICAL

Ground: negative
Charging system: alternator
Charging amps: 90
Battery volts: 12

About John Deere Tractor

The John Deere 7130 tractor is part of the 7030 Small-Frame Series. The 7130 is a kind of Row-Crop Tractors and is majorly used for Agriculture Tractors production. The 7130 tractor features a engine. This configuration gives better real-world usability.