Standard: Four SCVs/Optional: Three to six ISO couplers: 12.7 mm/1/2 in./Five ISO couplers (SCV 1: 19-mm [3/4-in.] couplers, SCV 2-5: 12.7-mm [1/2-in.] coupler)
Number of front selective control valves (SCVs)
One with front hitch
SCV control
Electronic
REAR HITCH
Hitch category (SAE designation)
Standard: Category 3N/3 with Quik-Coupler/Optional: Category 3/3N with hook ends/Category 3N/3 with hook ends
Maximum lift capacity behind lift points
Standard (Category 3): 6,894 kg/15,200 lb/Optional (Category 3N): 7,847 kg/17,300 lb/Standard (Category 3 with hook ends): 6,894 kg/Optional (Category 3 with Hook Ends): 7,847 kg
Sensing type
Electrohydraulic
DRAWBAR
Drawbar category
Standard: Category 3/Optional: Category 3 with heavy-duty support/Category 4
Independent/Standard: 44.45 mm (1.75 in.) 20-spline, 1,000 rpm/Optional: 44.45 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm/44.45 mm (1.75 in.) 20-spline, 1000 rpm with 35-mm (1.375-in.) 540E/1000/1000E rpm gearcase/44.45 mm (1.75 in.) 20-spline, 1000 rpm with 35-mm (1.375-in.) 540/540E/1000 rpm gearcase
Engine rpm (at rated PTO speeds)
540/1000 PTO rpm at 1950 engine rpm/540E/1000E PTO rpm at 1750 engine rpm
PTO actuation
Electric switch with adjustable modulation
FRONT HITCH
Category
Category 3N, ground engaging
Electric power
Seven-pin connector
Standard lift capacity
5,200 kg/11,464 lb
Front power take-off (PTO)
Available: 35 mm (1.375 in.) 21 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO)/Available through Parts: 44.45 mm (1.75 in.), 20 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO)
PTO speed
1,000 PTO rpm at 1940 engine rpm
REAR AXLE
Type
Standard: Rack-and-pinion or flange axles/Optional: Diameter: 110 x 2550 mm/4.33 x 100.4 in./Diameter: 110 x 3010 mm/4.33 x 118.5 in./Diameter: 120 x 2550 mm/4.72 x 100.4 in./Diameter: 120 x 3010 mm/4.72 x 118.5 in./Flanged axle: 335 mm (13.2 in.)
Final drive type
Inboard planetary three pinion
Rear differential lock
Full-locking electrohydraulic
FRONT AXLE
Type
Standard: 1300 Series MFWD: tread range 1524 to 2235 mm/60 to 88 in./Optional: TLS: Tread range 1524 to 2235 mm/TLS with front brakes available with 40 km/h/24.9 mph/TLS with front brakes standard with 50 km/h/31 mph
Front axle differential lock
1300 Series MFWD: Limited slip/TLS: Limited slip/TLS with front brakes: Full-locking electrohydraulic (actuated at same time as rear diff lock)
TIRES
Front
RCI Group 42/43/44
Rear
RCI Group 47/48/49
Turning radius with brakes
380/85R34 group 42 tires at 152.4-cm (60-in.) spacing, 1300: 7 m/23 ft/600/70R30 group 43 tires at 188.2-cm (74.1-in.) spacing, TLS: 6.7 m/22 ft/620/75R30 group 44 tires at 208.3-cm (82-in.) spacing, TLS: 8.7 m/28.5 ft
STEERING
Type
Standard: Hydraulic power-steering with electric pump back-up/Optional: ActiveCommand Steering 2 (ACS2) w/ electronic back-up pump
ELECTRICAL SYSTEM
Alternator size
Standard: 210 amp/Optional: 250 amp
Battery options
12 V
Working lights
Standard: 18 halogen/Available: 18 LED or 22 LED
Type of bulb in headlight (Halogen, Zenon, LED)
Standard: 65-W halogen/Available: LED
Total cold cranking amps
With two 925 CCA group 31 batteries: 1850 CCA
OPERATOR STATION
Seat
Degree of seat swivel, left hand/Optional: 25 degree/Degree of seat swivel, right hand/30 degree/Standard: air suspension/Optional: ActiveSeat II
Cab suspension
Optional
Instructional seat
Standard
Display
Standard: 4600 Generation 4 CommandCenter: 25.4 cm/10 in.
Radio
Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Inner cab volume
3.24 m3/114 cu ft
Cab glass area
6.56 m2/70.61 sq ft
DIMENSIONS
Wheelbase
2,925 mm/115.2 in.
Overall length
5,540 mm/218 in.
Drawbar clearance
Group 47 rear tires: 360 mm/14.2 in./Group 48 rear tires: 415 mm/16.3 in./Group 49 rear tires: 461 mm/18.1 in.
WEIGHT
Base machine weight
e23, TLS, 18.4R46: 10,000 kg/22,000 lb
Maximum ballast level
SAE PTO hp: 65.8 kg/145 hp
CAPACITIES
Crankcase oil volume
23 L/6.1 U.S. gal.
Fuel tank
e23: 463 L/122 U.S. gal./IVT: 513 L/135 U.S. gal.
Diesel exhaust fluid (DEF) tank
26.2 L/6.9 U.S. gal.
Cooling system
44.5 L/11.8 U.S. gal.
Transmission-hydraulic system
160 L/42.3 U.S. gal.
SERVICEABILITY
Interval for engine oil change
500 hours
Interval for hydraulic/transmission oil change
1,500 hours
Interval for engine coolant change
6,000 hours
LOADERS
Loader
700M
Lift capacity at full height
2417 kg/5304 lb
Maximum lift height
4741 mm/186 in.
PRECISION AG
Guidance
Integrated AutoTrac
Telematic
JDLink
Remote diagnostics
ServiceADVISOR Remote: available with JDLink hardware and activations/Remote Display Access: available with JDLink hardware and activations
MISCELLANEOUS
Country of manufacture
USA
ADDITIONAL INFORMATION
Date collected
10-Jul-2020
About John Deere Tractor
The John Deere 7R 290 tractor is part of the 7R Series. The 7R 290 is a Row-Crop Tractors type, which is used often in Agriculture Tractors. A 30 horsepower engine powers the 7R 290 tractor. This configuration improves usability in the real world.