John Deere 9RX 590 Tractor

Manufacturer:John Deere

Price:693,579(USD)

Series:9RX Series

Model:9RX 590

Equipment Type: Four-wheel Drive 4WD Tractors

Factory:None

Full Specifications

KEY SPECS

Engine description: John Deere PowerTech 13.6L (B20 diesel compatible)
Engine displacement: 13.6 L/827 cu in.
Rated engine power: 434 kW/590 hp
Maximum engine power: 477 kW/649 hp
Rated PTO power (hp SAE): 249 kW/335 hp
Transmission type: John Deere e18 18-speed PowerShift with Efficiency Manager: 40 km/h/25 mph
Hydraulic pump rated output: Standard: 208 L/min/55 gpm/Optional: 416 L/min/110 gpm
Rear hitch category (SAE designation): Category 4N/4 with capacity: 6804 kg/15,000 lb/Category 4N/N: 9072 kg/20,000 lb
Base machine weight: 25,546 kg/56,320 lb

ENGINE SPECIFICATIONS

Description: John Deere PowerTech 13.6L (B20 diesel compatible)
Engine type: Diesel, inline, 6-cylinder, wet-sleeve cylinder liners with four valves in-head
Rated speed: 2100 rpm
Aspiration: Dual series turbocharger with fixed geometry first stage and wastegated second stage; air-to-air aftercooling and cooled exhaust gas recirculation (EGR)
Emission level: Final Tier 4 (FT4)
After treatment type: Diesel oxidation catalyst (DOC)/selective catalytic reduction (SCR)
Displacement: 13.6 L/827 cu in.

ENGINE PERFORMANCE

Rated power: 434 kW/590 hp
Rated PTO power (hp SAE): 249 kW/335 hp
Power boost: 10 percent
Maximum engine power: 477 kW/649 hp
Engine peak torque: At 1600 rpm: 2723 Nm 2008 lb-ft
PTO torque rise: 38 percent

TRANSMISSION

Type: John Deere e18 18-speed PowerShift with Efficiency Manager: 40 km/h/25 mph

HYDRAULIC SYSTEM

Type: Closed-center, pressure-and-flow compensated
Pump rated output: Standard: 208 L/min/55 gpm/Optional: 416 L/min/110 gpm
Available flow at a single rear SCV: 1.3-cm (1/2-in.) couplers: 132 L/min/35 gpm/1.9-cm (3/4-in.) couplers: 159 L/min/42 gpm
Number of rear selective control valves (SCVs): Four to eight factory or field installed/Base: four 1.3-cm (1/2-in.) couplers/Optional: five to six 1.3-cm (1/2-in.) couplers factory installed/Optional: three 1.9-cm (3/4-in.) couplers plus five 1.3-cm (1/2-in.) couplers factory installed
SCV control: Electronic

REAR HITCH

Hitch category (SAE designation): Category 4N/4 with capacity: 6804 kg/15,000 lb/Category 4N/4: 9072 kg/20,000 lb
Maximum lift capacity behind lift points: Category 4N/4: 9072 kg/20,000 lb
Sensing type: Electrohydraulic with draft sensing

DRAWBAR

Drawbar category: Category 5
Maximum vertical load: 5440 kg/12,000 lb

REAR POWER TAKE-OFF (PTO)

Type: Independent/44 mm (1.75 in.) 20-spline, 1000 rpm
PTO actuation: Electrohydraulic

REAR AXLE

Final drive type: Bull gear and double idler with floating pinion
Rear differential lock: Full-locking electrohydraulic

FRONT AXLE

Front axle differential lock: Full-locking electrohydraulic

TRACKS

Tread spacing: Wide undercarriage: 2218 mm/87 in./3048 mm/120 in.
Drive type: Camso® 3500 and 6500 Ag Series - reinforced drive lug technology
Track width: Standard: 762 mm/30 in./914 mm/36 in.
Midrollers: Two

STEERING

Type: Standard: Hydraulic power steering/Optional: ActiveCommand Steering (ACS®)

ELECTRICAL SYSTEM

Alternator size: Standard: 250 amp/Optional: 330 amp
Battery options: 12 V
Working lights: Standard: 18 halogen/Optional: 18 or 24 LED plus 8 LED conveninence lights
Type of bulb in headlight (Halogen, Zenon, LED): Standard: halogen, 65 W/Optional: LED
Total cold cranking amps: 3 x 925 CCA/Total: 2775 CCA

OPERATOR STATION

Seat: Degree of seat swivel, left hand/25 degree (angle)/Degree of seat swivel, right hand/25 degree (angle)/Air suspension
Cab suspension: Standard
Instructional seat: Standard
Display: Standard: Generation 4 4600 CommandCenter: 25.4 cm/10 in./Optional: Extended monitor
Radio: Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna/Optional: Touchscreen radio
Inner cab volume: 3.27 m3/115 cu ft
Cab glass area: 6.64 m2/71.47 sq ft

DIMENSIONS

Wheelbase: 4125 mm/162.4 in.
Overall length: Excluding hitch: 8309 mm/327.1 in./Including hitch and coupler: 8545 mm/336.4 in.
Drawbar clearance: 311 mm/12.2 in.
Approximate shipping weight, Open;Cab: 20,582 kg/45,375 lb

WEIGHT

Base machine weight: 20,582 kg/45,375 lb
Maximum ballast level: 30,391 kg/67,000 lb

CAPACITIES

Crankcase oil volume: 64 L/16.9 U.S. gal.
Fuel tank: 1514 L/400 U.S. gal.
Diesel exhaust fluid (DEF) tank: 120 L/31.7 U.S. gal.
Cooling system: 62 L/16.3 U.S. gal.
Transmission-hydraulic system: With 3-point hitch and PTO: 227 L/60 U.S. gal./Without 3-point hitch and PTO: 220 L/58 U.S. gal.

SERVICEABILITY

Interval for engine oil change: 500 hours
Interval for hydraulic/transmission oil change: 1500 hours
Interval for engine coolant change: 6000 hours

PRECISION AG

Guidance: Integrated AutoTrac
Telematic: Available with JDLink hardware, activations, and Ethernet harnesses (availability dependent upon destination)
Remote diagnostics: Available with activated JDLink hardware and activations

About John Deere Tractor

The 9RX 590 type tractor is part of the John Deere 9RX Series. The 9RX 590 is a Four-wheel Drive 4WD Tractors type, which is used mostly in Agriculture Tractors. The 9RX 590 tractor has a 335 horsepower engine. This setup improves usability in the real world.