John Deere 8130 Tractor (2009)

Manufacturer:John Deere

Price:N/A

Series:8030 Series

Model:8130

Equipment Type: Row-Crop Tractors

Factory:Waterloo, Iowa, USA

Full Specifications

OCED TRACTOR TEST 1884 2

Description: Diesel PowerShift 4WD September 19 - October 5, 2006 Link: OCED Tractor Test 1884 file PTO performance Drawbar performance Gear 8 used for power test Gear 5 used for pull test
Max power: 158.05hp / 117.9kW
Fuel use: 10.3gal/hour / 39.0l/hour
Power at rated engine speed: 182.22hp / 135.9kW
Power at rated PTO speed: 197.60hp / 147.4kW
Max pull: 18935lbs / 8588kg

JOHN DEERE 8130 POWER

Engine (gross): 225hp / 167.8kW
Engine (max): 240hp / 179.0kW
PTO (claimed): 180hp / 134.2kW
Drawbar (tested): 158.05hp / 117.9kW
PTO (tested): 208.27hp / 155.3kW

ENGINE DETAIL

Description: John Deere PowerTech variable geometry turbocharged diesel 6-cylinder 24-valve liquid-cooled inline
Displacement: 548ci / 9.0L
Bore/Stroke: 4.661x5.354inches / 118x 136mm
Rated Power (EC 97/98): 225hp / 167.8kW
Maximum Power (EC 97/68): 240hp / 179.0kW
Air cleaner: dual paper elements
Compression: 16.3:1
Rated RPM: 2100
Idle RPM: 900-2200
Operating RPM: 1500-2100
Starter volts: 12
Oil capacity: 25.5qts / 24.1L 26qts / 24.6L (ILS)
Coolant capacity: 42.3qts / 40.0L

JOHN DEERE 8130 ENGINE

Description: John Deere 9.0L 6-cyl diesel

TRANSMISSION 1

Transmission: John Deere PowerShift
Type: full power shift
Gears: 16 forward and 4 reverse
Clutch: hydraulic wet disc
Oil capacity: 160qts / 151.4L 168qts / 159.0L (ILS)
Description: Full power shift transmission operated with right-hand control lever. Transmission defaults to gear 7-forward and 2-reverse on startup, although this may be re-programmed. Automatic PowerShift (APS) enables automatic shifting to maintain engine load

TRANSMISSION 2

Transmission: John Deere Infinitely Variable Transmission (IVT)
Gears: infinite forward and reverse
Description: IVT available with 40 or 50 kph (25 or 31 mph) maximum speed. With maximum speed set to less than 2 kph the transmission automatically enters creeper mode

MECHANICAL

Chassis: 4x2 2WD/4x4 MFWD 4WD/4x4 Independent Link Suspension (ILS) MFWD 4WD
Steering: power
Brakes: wet disc
Cab: CommandView cab standard
Transmission: 16-speed full power shift

CAPACITY

Fuel: 180gal / 681.3L
Hydraulic system: 9.5gal / 36.0L 14.5gal / 54.9L (with aux reservoir)

HYDRAULICS

Type: closed center PFC
Capacity: 9.5gal / 36.0L 14.5gal / 54.9L (with aux reservoir)
Pressure: 2098psi / 144.7bar
Valves: 3 to 5
Pump flow: 31.7gpm / 120.0lpm
Total flow: 44gpm / 166.5lpm 60gpm / 227.1lpm (optional)

TRACTOR HITCH

Rear Type: III/IIIN/IVN/III (optional)
Rear lift (at 24: 12400lbs / 5624kg 15200lbs / 6894kg (optional) 17300lbs / 7847kg (optional)

POWER TAKE-OFF (PTO)

Rear PTO: independent
Rear RPM: 1000/540/1000 (optional)
Engine RPM: 540@1817 / 1000@2000

JOHN DEERE 8130 TIRES

Ag front: 11.00-24 (2WD) / 420/90R30 (4WD)
Ag rear: 480/80R46

DIMENSIONS

Wheelbase: 118.9inches / 302cm (ILS) 120.1inches / 305cm (MFWD) 126.8inches / 322cm (2WD)
Length: 219.1inches / 556cm
Height: 122.9inches / 312cm
Weight: 21774lbs / 9876kg (2WD) 25147lbs / 11406kg (ILS 4WD)
Ground clearance: 17.4inches / 44cm

DIMENSIONS & TIRES

Wheelbase: 118.9inches / 302cm (ILS) 120.1inches / 305cm (MFWD) 126.8inches / 322cm (2WD)
Weight: 21774 to 25147 pounds
Front tire: 11.00-24
Rear tire: 480/80R46

ELECTRICAL

Ground: negative
Charging system: alternator
Charging amps: 200
Batteries: 2
Battery CCA: 925
Battery volts: 12

About John Deere Tractor

The 8130 model tractor belongs to the John Deere 8030 Series. The 8130 is a Row-Crop Tractors type, which is used often in Agriculture Tractors. The engine of the 8130 tractors is impressive. This setup offers a improved usability in the actual world.