John Deere 5075E Tractor (None)
Manufacturer:John Deere
Price:29,804(USD)
Series:5 Series
Model:5075E
Equipment Type: Utility Tractors
Factory:None
Full Specifications
KEY SPECS
- Engine description
- John Deere PowerTech 3029
- Engine displacement
- 3 cylinders: 2.9 L/179 cu in.
- Rated engine power
- At 2100 rpm: 55 kW/73 hp
- Rated PTO power (hp SAE)
- @ 2100 rpm/Open Station - 45 kW (60.3 PTO hp)/Cab - 43 kW (57.6 PTO hp)
- Maximum PTO power
- @ 1800 RPM/Open Station - 46.3kw (62hp)/Cab - 45.5kw (61hp)
- Transmission type
- Standard: 9F/3R Syncshuttle/Optional: 12F/12R PowrReverser
- Hydraulic pump rated output
- Standard: 66.1 L/min/17.5 gpm
- Rear hitch category (SAE designation)
- Category 2; convertible to 1
ENGINE SPECIFICATIONS
- Description
- John Deere PowerTech 3029
- Aspiration
- Turbocharged
- Cylinders liners
- Wet sleeved
- Displacement
- 3 cylinders: 2.9 L/179 cu in.
ENGINE PERFORMANCE
- Rated power
- At 2100 rpm: 55 kW/73 hp
- Rated PTO power (hp SAE)
- @ 2100 rpm/Open Station - 45 kW (60.3 PTO hp)/Cab - 43 kW (57.6 PTO hp)
- Maximum PTO power
- @ 1800 RPM/Open Station - 46.3kw (62hp)/Cab - 45.5kw (61hp)
TRANSMISSION
- Type
- Standard: 9F/3R Syncshuttle/Optional: 12F/12R PowrReverser
- Reverser
- Optional
- Clutch; wet/dry
- Dry on 9F/3R Syncshuttle/Wet on 12F/12R PowrReverser
- Creeper
- Option on 9F/3R transmission models
HYDRAULIC SYSTEM
- Type
- Open Center
- Pump rated output
- Standard: 66.1 L/min/17.5 gpm
- Available flow at a single rear SCV
- 43.4 L/min/11.5 gpm
- Number of rear selective control valves (SCVs)
- Standard: 1/Optional: 2
- Number of mid selective control valves (SCVs)
- Standard: 0/Optional: 2
- Joystick SCV control
- 2WD: FIK/MFWD: Standard
REAR HITCH
- Hitch draft control load sense type
- Mechanical
- Remote control valves available
- Standard: 1/Optional: 2
- Hitch category (SAE designation)
- Category 2; convertible to 1
- Maximum lift capacity behind lift points
- OECD hitch lift cap at 24 behind: 3192 lb/1448 kg
- Sensing type
- Top link
REAR POWER TAKE-OFF (PTO)
- Type
- Standard: Independent 540/Optional: Independent 540E (12x12)
- Engine rpm (at rated PTO speeds)
- 540 at 2100 rpm
- PTO actuation
- Mechanical (lever on 9x3)/Electrohydraulic with wet clutch (12x12)
REAR AXLE
- Final drive type
- Planetary
- Differential controls
- Mechanical (pedal)
- Axle type
- Flanged
- Brakes, type and control
- Hydraulic wet disc
TIRES
- Front
- 2WD: 7.5-16, R1/MFWD: 9.5-24 R1
- Rear
- 2WD: 16.9-28, R1/MFWD: 16.9-28, R1
- Turning radius with brakes
- 2WD: 3.1 m/10.2 ft/MFWD: 3.94 m/12.9 ft
- Turning radius without brakes
- 2WD: 3.5 m/11.5 ft/MFWD: 4.65 m/15.3 ft
OPERATOR STATION
- Rollover protective structure, OOS
- Rigid - foldable - telescopic/Foldable, 2-Post/Platform - flat/straddle/Straddle/Gearshift location - console/floor/Floor, on the side/
- Seat
- Mechanical
- Radio
- Optional
DIMENSIONS
- Wheelbase
- 2WD and MFWD: 2050 mm/80.7 in.
- Overall length
- 3639 mm/143.3 in.
- Approximate shipping weight, Open;Cab
- MFWD: Open: 2685 kg/5919 lb/Cab: 3040 kg/6702 lb
CAPACITIES
- Fuel tank
- Standard: Open: 72.5 L/19 U.S. gal./Cab: 82 L/21 U.S. gal.
MISCELLANEOUS
- Country of manufacture
- Sub assembly in Pune, India, Final assembly in Augusta, GA
About John Deere Tractor
The 5075E model tractor is member of John Deere's 9R line of tractors. The 5075E is a Utility Tractors type, that is used mostly in the Agriculture Tractors. A 73 horsepower engine runs the 5075E tractor. This setting more efficiency in the real world.
