John Deere 9100 Tractor (2001)

Manufacturer:John Deere

Price:N/A

Series:9000 Series

Model:9100

Equipment Type: Four-wheel Drive 4WD Tractors

Factory:Waterloo, Iowa, USA

Full Specifications

ENGINE DETAIL

Description: John Deere turbocharged aftercooled diesel 6-cylinder liquid-cooled inline
Displacement: 496ci / 8.1L
Bore/Stroke: 4.56x5.06inches / 116x 129mm
Power: 260hp / 193.9kW
Compression: 16.5:1
Rated RPM: 2100
Coolant capacity: 56qts / 53.0L

ENGINE OIL

Oil capacity: 32qts / 30.3L

JOHN DEERE 9100 ENGINE

Description: John Deere 8.1L 6-cyl diesel

TRANSMISSIONS OVERVIEW

Description: 12-speed partially synchronized 24-speed partial power shift 12-speed full power shift

TRANSMISSION 1

Transmission: John Deere Syncro
Type: partially synchronized
Gears: 12 forward and 3 reverse
Oil capacity: 147.2qts (100mm axle) / 139.3L 151.6qts (110mm axle) / 143.5L 151.2qts (PTO 100mm axle) / 143.1L 155.6qts (PTO 110mm axle) / 147.3L 140qts (SN030001+) / 132.5L
Description: Three speeds (1-3 and reverse) in four ranges (A-D). Synchronized shifting between speeds using the clutch. Tractor must be stopped, and clutch used, to shift ranges. Reverse is not available in the highest (D) range

SPEEDS 1

Description: With 20.8R38 tires

TRANSMISSION 2

Transmissio: John Deere PowrSync
Type: partial power shift
Gears: 24 forward and 6 reverse
Oil capacity: 147.2qts (100mm axle) / 139.3L 151.6qts (110mm axle) / 143.5L 151.2qts (PTO 100mm axle) / 143.1L 155.6qts (PTO 110mm axle) / 147.3L 140qts (SN030001+) / 132.5L
Description: Three speeds (1, 2, 3 and reverse) in four ranges (A-D) plus high-low power shift. Speeds and ranges may be shifted on the move, using the clutch. High-low power shift for each speed using lever

SPEEDS 2

Description: With 20.8R38 tires

TRANSMISSION 3

Transmission: John Deere PowerShift
Type: full power shift
Gears: 12 forward and 2 reverse
Oil capacity: 64qts (early) / 60.6L 56qts (SN030001+) / 53.0L 60qts (no PTO early) / 56.8L 54qts (no PTO late) / 51.1L 120qts (axles early) / 113.6L 108qts (axles SN030001+) / 102.2L

SPEEDS 3

Description: With 20.8R38 tires

JOHN DEERE 9100 TRANSMISSIONS

Description: 12-speed partially synchronized 24-speed partial power shift 12-speed full power shift

MECHANICAL

Description: Four-wheel drive Hydraulic wet disc brakes Cab standard
Final drive: inboard planetary
Steering: hydrostatic power

CAPACITY

Fuel: 270gal / 1022.0L
Hydraulic system: 26gal / 98.4L

HYDRAULICS

Type: closed center PFC
Capacity: 26gal / 98.4L
Pressure: 2900psi / 200.0bar
Valve: 3 to 5
Pump: 35gpm / 132.5lpm
Total flow: 44gpm / 166.5lpm

TRACTOR HITCH

Rear Type: III
Rear lift: 13,871lbs / 6291kg

POWER TAKE-OFF (PTO)

Rear PTO: independent
Rear RPM: 1000 (optional)

JOHN DEERE 9100 TIRES

Ag front: 20.8R38
Ag rear: 20.8R38

DIMENSIONS & TIRES

Wheelbase: 137.8inches / 350cm
Weight: 28,380lbs / 12873kg
Front tire: 20.8R38
Rear tire: 20.8R38

9100 SERIAL NUMBERS

1999: 20001
2001: 40001

9100 SERIAL LOCATION

Description: Serial number plate on the top-left of the tractor's hinge

ELECTRICAL

Ground: negative
Charging system: alternator
Charging amps: 140
Batteries: 2
Battery CCA: 925
Battery volts: 12

About John Deere Tractor

The John Deere 9100 type tractor is part of the 9000 Series of tractors. The 9100 is classified as a Four-wheel Drive 4WD Tractors and that is mostly used for Agriculture Tractors operations. The 9100 tractor features a engine. This configuration more usefulness in the actual world.