John Deere 9120 Tractor (2007)

Manufacturer:John Deere

Price:N/A

Series:9020 Series

Model:9120

Equipment Type: Four-wheel Drive 4WD Tractors

Factory:Waterloo, Iowa, USA

Full Specifications

OCED TRACTOR TEST 1810 2

Description: Diesel 18-speed 4WD September 23 - 27, 2002 Link: OCED Tractor Test 1810 file PTO performance Drawbar performance Gear 7 used for power test Gear 1 used for pull test
Power at rated engine speed: 244.57hp / 182.4kW
Fuel use: 14.5gal/hour / 54.9l/hour
Power at rated PTO speed: 262.97hp / 196.1kW
Max power: 226.02hp / 168.5kW
Max pull: 35,211lbs / 15971kg

JOHN DEERE 9120 POWER

Engine: 280hp / 208.8kW
PTO (claimed): 230hp / 171.5kW
Drawbar (tested): 226.02hp / 168.5kW
PTO (tested): 244.57hp / 182.4kW

ENGINE DETAIL

Description: John Deere turbocharged diesel 6-cylinder liquid-cooled
Displacement: 496ci / 8.1L
Bore/Stroke: 4.56x5.06inches / 116x 129mm
Power: 280hp / 208.8kW
Air cleaner: dry
Compression: 16.0:1
Rated RPM: 2100
Starter volts: 12
Coolant capacity: 55qts / 52.1L

ENGINE OIL

Oil capacity: 28qts / 26.5L

JOHN DEERE 9120 ENGINE

Description: John Deere 8.1L 6-cyl diesel

TRANSMISSIONS OVERVIEW

Description: 24-speed partial power shift 18-speed full power shift

TRANSMISSION 1

Transmission: John Deere PowerSync
Type: partial power shift
Gears: 24 forward and 6 reverse
Oil capacity: 136qts / 128.7L 140qts / 132.5L (with PTO)
Description: Four ranges (A-D) and three gears (1-3) with high-low power shift. Synchronized shifting between ranges A-B, B-C, and C-D. Gear shifts are synchronized between 1-R, 1-2, and 2-3. Reverse gear does not operate in D range

SPEEDS 1

Description: With 20.8R42 tires

TRANSMISSION 2

Transmission: John Deere Powershift
Type: full power shift
Gears: 18 forward and 6 reverse

SPEEDS 2

Description: With 20.8R42 tires

MECHANICAL

Chassis: 4x4 articulated 4WD
Steering: hydrostatic articulated
Brakes: hydraulic wet disc
Cab: CommandView cab standard with air-conditioning
Transmissions: 24-speed partial power shift 18-speed full power shift

CAPACITY

Fuel: 270gal / 1022.0L
Hydraulic system: 27gal / 102.2L 28gal / 106.0L (with 3pt)

HYDRAULICS

Type: closed center pressure flow compensated
Capacity: 27gal / 102.2L 28gal / 106.0L (with 3pt)
Pressure: 2900psi / 200.0bar
Valves: 4 or 5
Pump flow: 30gpm / 113.6lpm
Total flow: 44gpm / 166.5lpm 48gpm / 181.7lpm (Powershift)

TRACTOR HITCH

Rear Type: III/IV/IVN
Rear lift: 13,871lbs / 6291kg 14,445lbs / 6552kg (optional)

POWER TAKE-OFF (PTO)

Rear PTO: independent
Rear RPM: 1000

JOHN DEERE 9120 TIRES

Ag front: 20.8R42
Ag rear: 20.8R42

DIMENSIONS

Wheelbase: 137.8inches / 350cm
Length: 274inches / 695cm 289inches / 734cm (with hitch)
Width: 115.5inches / 293cm
Shipping weight: 30,970lbs / 14047kg
Operating weight: 35,375lbs / 16046kg (620/70R46 duals)
Clearance (front axle): 26.8inches / 68cm
Clearance (drawbar): 15inches / 38cm

JOHN DEERE 9120 HEIGHT

Hood: 97.5inches / 247cm
Cab: 137.5inches / 349cm
Exhaust: 140inches / 355cm

DIMENSIONS & TIRES

Wheelbase: 137.8inches / 350cm
Weight: 30970 to 35375 pounds
Front tire: 20.8R42
Rear tire: 20.8R42

9120 SERIAL NUMBERS

Location: On the top-left of rear hinge member
2002: 1001
2003: 10001
2004: 20001
2005: 30001
2006: 40001
2007: 50001

ELECTRICAL

Ground: negative
Charging system: alternator
Charging amps: 140
Batteries: 2
Battery CCA: 925
Battery volts: 12

About John Deere Tractor

The John Deere 9120 tractor is part of the 9R tractor series. The 9120 is a Four-wheel Drive 4WD Tractors type, which is used mainly in Agriculture Tractors. The 9120 tractor is equipped by a engine. This configuration improves usability in the real world.