John Deere 9200 Tractor (2001)
Manufacturer:John Deere
Price:N/A
Series:9000 Series
Model:9200
Equipment Type: Four-wheel Drive 4WD Tractors
Factory:Waterloo, Iowa, USA
Full Specifications
ENGINE DETAIL
- Description
- John Deere turbocharged aftercooled diesel 6-cylinder liquid-cooled inline
- Displacement
- 643ci / 10.5L
- Bore/Stroke
- 5.00x5.43inches / 127x 138mm
- Power
- 310hp / 231.2kW
- Compression
- 16:1
- Rated RPM
- 2100
- Coolant capacity
- 56qts / 53.0L
ENGINE OIL
- Oil capacity
- 44qts / 41.6L
JOHN DEERE 9200 ENGINE
- Description
- John Deere 10.5L 6-cyl diesel
TRANSMISSIONS OVERVIEW
- Description
- 12-speed partially synchronized 24-speed partial power shift 12-speed full power shift
TRANSMISSION 1
- Transmission
- John Deere Syncro
- Type
- partially synchronized
- Gears
- 12 forward and 3 reverse
- Oil capacity
- 147.2qts (100mm axle) / 139.3L 151.6qts (110mm axle) / 143.5L 151.2qts (PTO 100mm axle) / 143.1L 155.6qts (PTO 110mm axle) / 147.3L
- Description
- Three speeds (1-3 and reverse) in four ranges (A-D). Synchronized shifting between speeds using the clutch. Tractor must be stopped, and clutch used, to shift ranges. Reverse is not available in the highest (D) range
SPEEDS 1
- Description
- With 20.8R42 tires
TRANSMISSION 2
- Transmission
- John Deere PowrSync
- Type
- partial power shift
- Gears
- 24 forward and 6 reverse
- Oil capacity
- 147.2qts (100mm axle) / 139.3L 151.6qts (110mm axle) / 143.5L 151.2qts (PTO 100mm axle) / 143.1L 155.6qts (PTO 110mm axle) / 147.3L
- Description
- Three speeds (1, 2, 3 and reverse) in four ranges (A-D) plus high-low power shift. Speeds and ranges may be shifted on the move, using the clutch. High-low power shift for each speed using lever
SPEEDS 2
- Description
- With 20.8R42 tires
TRANSMISSION 3
- Transmission
- John Deere PowerShift
- Type
- full power shift
- Gears
- 12 forward and 2 reverse
- Oil capacity
- 64qts / 60.6L 60qts (no PTO) / 56.8L 120qts (axles) / 113.6L
SPEEDS 3
- Description
- With 20.8R42 tires
JOHN DEERE 9200 TRANSMISSIONS
- Description
- 12-speed partially synchronized 24-speed partial power shift 12-speed full power shift
MECHANICAL
- Description
- Four-wheel drive Hydraulic wet disc brakes Cab standard
- Final drive
- inboard planetary
- Steering
- hydrostatic power
CAPACITY
- Fuel
- 270gal / 1022.0L
- Hydraulic system
- 26gal / 98.4L
HYDRAULICS
- Type
- closed center PFC
- Capacity
- 26gal / 98.4L
- Pressure
- 2900psi / 200.0bar
- Valve
- 3 to 5
- Pump flow
- 35gpm / 132.5lpm
- Total flow
- 44gpm / 166.5lpm
TRACTOR HITCH
- Rear Type
- III
- Rear lift
- 13,871lbs / 6291kg
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 1000 (optional)
JOHN DEERE 9200 TIRES
- Ag front
- 20.8R42
- Ag rear
- 20.8R42
DIMENSIONS & TIRES
- Wheelbase
- 137.8inches / 350cm
- Weight
- 31,015lbs / 14068kg
- Front tire
- 20.8R42
- Rear tire
- 20.8R42
9200 SERIAL NUMBERS
- 1999
- 20001
- 2001
- 40001
9200 SERIAL LOCATION
- Description
- Serial number plate on the top-left of the tractor's hinge
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Charging amps
- 140
- Batteries
- 3
- Battery CCA
- 925
- Battery volts
- 12
About John Deere Tractor
The John Deere 9200 tractor is part of the company's 9000 Series. The 9200 is a Four-wheel Drive 4WD Tractors and that is primarily used for Agriculture Tractors applications. A engine runs the 9200 tractor. This setup improves usability in the real world setting.
Four-wheel Drive 4WD Tractors
