John Deere 9400 Tractor (2001)
Manufacturer:John Deere
Price:121,000(USD)
Series:9000 Series
Model:9400
Equipment Type: Four-wheel Drive 4WD Tractors
Factory:Waterloo, Iowa, USA
Full Specifications
ENGINE DETAIL
- Description
- John Deere turbocharged aftercooled diesel 6-cylinder liquid-cooled inline
- Displacement
- 765ci / 12.5L
- Bore/Stroke
- 5.00x6.50inches / 127x 165mm
- Power
- 425hp / 316.9kW
- Compression
- 16:1
- Rated RPM
- 2100
- Coolant capacity
- 64qts / 60.6L
ENGINE OIL
- Oil capacity
- 44qts / 41.6L
JOHN DEERE 9400 ENGINE
- Description
- John Deere 12.5L 6-cyl diesel
TRANSMISSIONS OVERVIEW
- Description
- 12-speed partially synchronized 24-speed partial power shift 12-speed full power shift
TRANSMISSION 1
- Transmission
- John Deere Syncro
- Type
- partially synchronized
- Gears
- 12 forward and 3 reverse
- Oil capacity
- 147.2qts (100mm axle) / 139.3L 151.6qts (110mm axle) / 143.5L 151.2qts (PTO 100mm axle) / 143.1L 155.6qts (PTO 110mm axle) / 147.3L 140qts (SN030001+) / 132.5L
- Description
- Three speeds (1-3 and reverse) in four ranges (A-D). Synchronized shifting between speeds using the clutch. Tractor must be stopped, and clutch used, to shift ranges. Reverse is not available in the highest (D) range
SPEEDS 1
- Description
- With 710/70R38 tires
TRANSMISSION 2
- Transmission
- John Deere PowrSync
- Type
- partial power shift
- Gears
- 24 forward and 6 reverse
- Oil capacity
- 147.2qts (100mm axle) / 139.3L 151.6qts (110mm axle) / 143.5L 151.2qts (PTO 100mm axle) / 143.1L 155.6qts (PTO 110mm axle) / 147.3L 140qts (SN030001+) / 132.5L
- Description
- Three speeds (1, 2, 3 and reverse) in four ranges (A-D) plus high-low power shift. Speeds and ranges may be shifted on the move, using the clutch. High-low power shift for each speed using lever
SPEEDS 2
- Description
- With 710/70R38 tires
TRANSMISSION 3
- Transmission
- John Deere PowerShift
- Type
- full power shift
- Gears
- 12 forward and 2 reverse
- Oil capacity
- 64qts (early) / 60.6L 56qts (SN030001+) 53.0L / 60qts (no PTO early) 56.8L / 54qts (no PTO late) 51.1L / 120qts (axles early) 113.6L / 108qts (axles SN030001+) 102.2 L
SPEEDS 3
- Description
- With 710/70R38 tires
JOHN DEERE 9400 TRANSMISSIONS
- Description
- 12-speed partially synchronized 24-speed partial power shift 12-speed full power shift
MECHANICAL
- Description
- Four-wheel drive Hydraulic wet disc brakes Cab standard
- Steering
- hydrostatic power
CAPACITY
- Fuel
- 256gal / 969.0L
- Hydraulic system
- 26gal / 98.4L
HYDRAULICS
- Type
- closed center PFC
- Capacity
- 26gal / 98.4L
- Pressure
- 2900psi / 200.0bar
- Valve
- 2 to 5
- Pump flow
- 35gpm / 132.5lpm
- Total flow
- 44gpm / 166.5lpm
TRACTOR HITCH
- Rear Type
- III/IV/IVN OptOptional
- Rear lift
- 13,871lbs / 6291kg 14,445lbs*Cat. IV / 6552kg
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 1000 OptOptional
JOHN DEERE 9400 TIRES
- Ag front
- 710/70R38
- Ag rear
- 710/70R38
DIMENSIONS & TIRES
- Wheelbase
- 137.8inches / 350cm
- Weight
- 33770 to 37410 pounds
- Front tire
- 710/70R38
- Rear tire
- 710/70R38
9400 SERIAL NUMBERS
- 1999
- 20001
- 2001
- 40001
9400 SERIAL LOCATION
- Description
- Serial number plate on the top-left of the tractor's hinge
ELECTRICAL
- Groun
- negative
- Charging syste
- alternator
- Charging amp
- 140
- Batterie
- 3
- Battery CC
- 925
- Battery volt
- 12
About John Deere Tractor
The 9400 model tractor is part of John Deere's 9R line of tractors. The 9400 is a kind of Four-wheel Drive 4WD Tractors and which is mostly used for Agriculture Tractors applications. The engine of the 9400 tractor produces. This configuration more effectiveness in the actual world.
