John Deere 9560R Tractor (2014)
Manufacturer:John Deere
Price:406,839(USD)
Series:9R/RT Series
Model:9560R
Equipment Type: Four-wheel Drive 4WD Tractors
Factory:Waterloo, Iowa, USA
Full Specifications
OCED TRACTOR TEST 2044 2
- Description
- Diesel 18-speed 4WD October 9 - 26, 2012 Link: OCED Tractor Test 2044 file PTO performance Drawbar performance Gear 7 used for power test Gear 1 used for pull test
- Max power
- 454.33hp / 338.8kW
- Fuel use
- 29.0gal/hour / 109.8l/hour
- Power at rated engine speed
- 321.78hp / 240.0kW
- Power at rated PTO speed
- 357.53hp / 266.6kW
- Max pull
- 44000lbs / 19958kg
JOHN DEERE 9560R POWER
- Engine (gross)
- 560hp / 417.6kW
- Engine (max)
- 616hp / 459.4kW
- PTO (claimed)
- 319hp / 237.9kW
- Drawbar (tested)
- 454.33hp / 338.8kW
- PTO (tested)
- 364.23hp / 271.6kW
ENGINE DETAIL
- Description
- John Deere PowerTech PSX turbocharged diesel 6-cylinder 24-valve liquid-cooled inline
- Displacement
- 826.7ci / 13.5L
- Bore/Stroke
- 5.197x6.496inches / 132x 165mm
- Emissions
- Tier 4A
- Emission control
- exhaust gas recirculation (EGR)
- Rated Power (EC 97/98)
- 560hp / 417.6kW
- Maximum Power (EC 97/68)
- 616hp / 459.4kW
- Fuel system
- electronic unit injectors
- Compression
- 16:1
- Rated RPM
- 2100
- Starter volts
- 12
JOHN DEERE 9560R ENGINE
- Description
- John Deere 13.5L 6-cyl diesel
- Fuel tank
- 350gal / 1324.8L
TRANSMISSION
- Transmission
- John Deere PowerShift
- Type
- full power shift
- Gears
- 18 forward and 6 reverse
- Clutch
- hydraulic wet disc
SPEEDS
- Description
- With Group 48 rear tires
MECHANICAL
- Chassis
- 4x4 articulated 4WD
- Final drives
- inboard planetary with double-reduction axle
- Differential lock
- fully-locking electro-hydraulic
- Steering
- hydraulic power
- Brakes
- hydraulic wet disc
- Trailer brakes
- hydraulic
- Cab
- CommandView II cab standard with air-conditioning
- Transmission
- 18-speed full power shift
HYDRAULICS
- Type
- closed center pressure flow compensated
- Pressure
- 2900psi / 200.0bar
- Valves
- 4 to 6
- Pump flow
- 48gpm / 181.7lpm 78gpm / 295.2lpm (High-Flow)
- SCV flow
- 37gpm / 140.0lpm 45gpm / 170.3lpm (19.1mm SCV)
TRACTOR HITCH
- Rear Type
- 4N/4
- Control
- electronic draft sensing
- Rear lift
- 15,300lbs / 6940kg 20,000lbs / 9072kg (optional)
- Drawbar
- Category 5 standard heavy-duty support and 5,440 kg (12,000 pound) load rating
POWER TAKE-OFF (PTO)
- Rear PTO
- independent (optional)
- Rear RPM
- 1000 (1.75)
JOHN DEERE 9560R TIRES
- Ag front
- 800/70R38
- Ag rear
- 800/70R38
DIMENSIONS
- Wheelbase
- 137.8inches / 350cm
- Length
- 282inches / 716cm
- With hitch Length
- 295inches / 749cm
- Width
- 120inches / 304cm
- Front axle
- 4.72 by 120inches / 119by 3048mm
- Rear axle
- 4.72 by 120inches / 119by 3048mm
JOHN DEERE 9560R WEIGHT
- Shipping
- 41540lbs / 18842kg
- Operating
- 43410lbs / 19690kg *Weight with 480/80R46 triples
- Max capacity
- 60000lbs / 27216kg
JOHN DEERE 9560R HEIGHT
- Hood
- 108inches / 274cm
- Cab
- 145inches / 368cm 151inches / 383cm (GPS)
- Exhaust
- 177inches / 449cm
DIMENSIONS & TIRES
- Wheelbase
- 137.8inches / 350cm
- Weight
- 41540 to 43410 pounds
- Front tire
- 800/70R38
- Rear tire
- 800/70R38
9560R SERIAL NUMBERS
- Location
- Serial number plate on the front-right of the tractor frame, ahead of the front axle
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Charging amps
- 200
- Charging volts
- 12
- Batteries
- 3
- Battery CCA
- 925
- Battery volts
- 12
About John Deere Tractor
The 9560R type tractor is part of the John Deere 9R/RT Series. The 9560R is a Four-wheel Drive 4WD Tractors type, that is used mainly in Agriculture Tractors. The 9560R tractor is powered by a engine. This configuration offers better real-world usability.
