Full Specifications
KEY SPECS
Engine description
John Deere PowerTech 13.6L (B20 diesel compatible)
Engine displacement
13.6 L/827 cu in.
Rated engine power
324 kW/440 hp
Maximum engine power
356 kW/484 hp
Rated PTO power (hp SAE)
249 kW/335 hp
Transmission type
John Deere e18 18-speed PowerShift with Efficiency Manager: 40 km/h/25 mph
Hydraulic pump rated output
Standard: 208 L/min/55 gpm/Optional: 416 L/min/110 gpm
Rear hitch category (SAE designation)
Category 4N: 6804 kg/15,000 lb/Category 4N: 9072 kg/20,000 lb/Category 4N/4: 6804 kg/Category 4N/4: 9072 kg
Base machine weight
20,856 kg/45,980 lb
ENGINE SPECIFICATIONS
Description
John Deere PowerTech 13.6L (B20 diesel compatible)
Engine type
Diesel, inline, 6-cylinder, wet-sleeve cylinder liners with four valves in-head
Rated speed
2100 rpm
Aspiration
Single wastegated turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation (EGR)
Emission level
Final Tier 4 (FT4)
After treatment type
Diesel oxidation catalyst (DOC)/selective catalytic reduction (SCR)
Displacement
13.6 L/827 cu in.
ENGINE PERFORMANCE
Rated power
324 kW/440 hp
Rated PTO power (hp SAE)
249 kW/335 hp
Power boost
10 percent
Maximum engine power
356 kW/484 hp
Engine peak torque
At 1600 rpm: 2031 Nm 1498 lb-ft
PTO torque rise
38 percent
TRANSMISSION
Type
John Deere e18 18-speed PowerShift with Efficiency Manager: 40 km/h/25 mph
HYDRAULIC SYSTEM
Type
Closed-center, pressure-and-flow compensated
Pump rated output
Standard: 208 L/min/55 gpm/Optional: 416 L/min/110 gpm
Available flow at a single rear SCV
1.3-cm (1/2-in.) couplers: 132 L/min/35 gpm/1.9-cm (3/4-in.) couplers: 159 L/min/42 gpm
Number of rear selective control valves (SCVs)
Four to eight factory or field installed/Base: four 1.3-cm (1/2-in.) couplers/Optional: five to six 1.3-cm (1/2-in.) couplers factory installed/Optional: three 1.9-cm (3/4-in.) couplers plus five 1.3-cm (1/2-in.) couplers factory installed
SCV control
Electronic
REAR HITCH
Hitch category (SAE designation)
Category 4N: 6804 kg/15,000 lb/Category 4N: 9072 kg/20,000 lb/Category 4N/4: 6804 kg/Category 4N/4: 9072 kg
Maximum lift capacity behind lift points
Category 4N/4: 9072 kg/20,000 lb
Sensing type
Electrohydraulic with draft sensing
DRAWBAR
Drawbar category
Category 4 or Category 5
Maximum vertical load
Standard: 2470 kg/5450 lb/Optional: Category 4 with heavy-duty drawbar support: 2470 kg/Category 5 with heavy-duty drawbar support: 5440 kg/12,000 lb
REAR POWER TAKE-OFF (PTO)
Type
Independent/44 mm (1.75 in.) 20-spline, 1000 rpm
PTO actuation
Electrohydraulic
REAR AXLE
Type
Diameter: 120 x 3048 mm/4.72 x 120 in.
Final drive type
Inboard planetary with double-reduction axle
Rear differential lock
Full-locking electrohydraulic
FRONT AXLE
Type
Diameter: 120 x 3048 mm/4.72 x 120 in.
Front axle differential lock
Full-locking electrohydraulic
TIRES
Turning radius with brakes
Group 47 or Group 48 tires: 6.035 m/19.8 ft
STEERING
Type
Standard: Hydraulic power steering/Optional: ActiveCommand Steering (ACS)
ELECTRICAL SYSTEM
Alternator size
Standard: 250 amp/Optional: 330 amp
Battery options
12 V
Working lights
Standard: 18 halogen/Optional: 18 or 24 LED plus 8 LED conveninence lights
Type of bulb in headlight (Halogen, Zenon, LED)
Standard: halogen, 65 W/Optional: LED
Total cold cranking amps
3 x 925 CCA/Total: 2775 CCA
OPERATOR STATION
Seat
Degree of seat swivel, left hand/25 degree (angle)/Degree of seat swivel, right hand/40 degree (angle)/Standard: air suspension/Optional: ActiveSeat II
Instructional seat
Standard
Display
Standard: Generation 4 4600 CommandCenter: 25.4 cm/10 in./Optional: Extended monitor
Radio
Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna/Optional: Touchscreen radio
Inner cab volume
3.27 m3/115 cu ft
Cab glass area
6.64 m2/71.47 sq ft
DIMENSIONS
Wheelbase
3912 mm/154 in.
Overall length
With front weights, excluding hitch and coupler: 7945 mm/312.8 in./With front weights, including hitch and coupler: 8427 mm/331.8 in.
Drawbar clearance
Group 48 tires: 527 mm/20.7 in.
Approximate shipping weight, Open;Cab
20,856 kg/45,980 lb
WEIGHT
Base machine weight
20,856 kg/45,980 lb
Maximum ballast level
27,216 kg/60,000 lb
CAPACITIES
Crankcase oil volume
64 L/16.9 U.S. gal.
Fuel tank
1514 L/400 U.S. gal.
Diesel exhaust fluid (DEF) tank
120 L/31.7 U.S. gal.
Cooling system
56.5 L/14.9 U.S. gal.
Transmission-hydraulic system
With 3-point hitch and PTO: 227 L/60 U.S. gal./Without 3-point hitch and PTO: 220 L/58 U.S. gal.
SERVICEABILITY
Interval for engine oil change
500 hours
Interval for hydraulic/transmission oil change
1500 hours
Interval for engine coolant change
6000 hours
PRECISION AG
Guidance
Integrated AutoTrac
Telematic
Available with JDLink hardware, activations, and Ethernet harnesses (availability dependent upon destination)
Remote diagnostics
Available with activated JDLink hardware and activations
The John Deere 9R 440 tractor is part of the 9R tractor series. The 9R 440 is a type of 4wd Track Tractors and is majorly used for Agriculture Tractors applications. The engine of the 9R 440 tractor offers 335 horsepower. This arrangement is more practical in the actual world.