Full Specifications
KEY SPECS
Engine description
John Deere PowerTech 13.6L (B20 diesel compatible)
Engine displacement
13.6 L/827 cu in.
Rated engine power
419 kW/570 hp
Maximum engine power
461 kW/627 hp
Rated PTO power (hp SAE)
245 kW/329 hp
Transmission type
John Deere e18 18-speed PowerShift with Efficiency Manager: 40 km/h/25 mph
Hydraulic pump rated output
Standard: 208 L/min/55 gpm/Optional: 416 L/min/110 gpm
Rear hitch category (SAE designation)
Category 4N/N: 6804 kg/15,000 lb/Category 4N/N: 9072 kg/20,000 lb
Base machine weight
20,582 kg/45,375 lb
ENGINE SPECIFICATIONS
Description
John Deere PowerTech 13.6L (B20 diesel compatible)
Engine type
Diesel, inline, 6-cylinder, wet-sleeve cylinder liners with four valves in-head
Rated speed
2100 rpm
Aspiration
Dual series turbocharger with fixed geometry first stage and wastegated second stage; air-to-air aftercooling and cooled exhaust gas recirculation (EGR)
Emission level
Final Tier 4 (FT4)
After treatment type
Diesel oxidation catalyst (DOC)/selective catalytic reduction (SCR)
Displacement
13.6 L/827 cu in.
ENGINE PERFORMANCE
Rated power
419 kW/570 hp
Rated PTO power (hp SAE)
245 kW/329 hp
Power boost
10 percent
Maximum engine power
461 kW/627 hp
Engine peak torque
At 1600 rpm: 2631 Nm 1940 lb-ft
PTO torque rise
38 percent
TRANSMISSION
Type
John Deere e18 18-speed PowerShift with Efficiency Manager: 40 km/h/25 mph
HYDRAULIC SYSTEM
Type
Closed-center, pressure-and-flow compensated
Pump rated output
Standard: 208 L/min/55 gpm/Optional: 416 L/min/110 gpm
Available flow at a single rear SCV
1.3-cm (1/2-in.) couplers: 132 L/min/35 gpm/1.9-cm (3/4-in.) couplers: 159 L/min/42 gpm
Number of rear selective control valves (SCVs)
Four to eight factory or field installed/Base: four 1.3-cm (1/2-in.) couplers/Optional: five to six 1.3-cm (1/2-in.) couplers factory installed/Optional: three 1.9-cm (3/4-in.) couplers plus five 1.3-cm (1/2-in.) couplers factory installed
SCV control
Electronic
REAR HITCH
Hitch category (SAE designation)
Category 4N/N: 6804 kg/15,000 lb/Category 4N/N: 9072 kg/20,000 lb
Maximum lift capacity behind lift points
Category 4N/4: 9072 kg/20,000 lb
Sensing type
Electrohydraulic with draft sensing
DRAWBAR
Drawbar category
Standard: Category 5 with heavy-duty drawbar support/Optional: Category 5
Maximum vertical load
5440 kg/12,000 lb
REAR POWER TAKE-OFF (PTO)
Type
Independent/44 mm (1.75 in.) 20-spline, 1000 rpm
PTO actuation
Electrohydraulic
REAR AXLE
Final drive type
Outboard planetary
TRACKS
Drive type
Camso® 4500 and 6500 General Ag Series - friction drive track belts
Track width
Standard: 762 mm/30 in./Optional: 914 mm/36 in.
Midrollers
Four
STEERING
Type
Heavy-duty steering pump: 130 cc/7.9 cu in.
ELECTRICAL SYSTEM
Alternator size
Standard: 250 amp/Optional: 330 amp
Battery options
12 V
Working lights
Standard: 18 halogen/Optional: 18 or 24 LED plus 8 LED conveninence lights
Type of bulb in headlight (Halogen, Zenon, LED)
Standard: halogen, 65 W/Optional: LED
Total cold cranking amps
3 x 925 CCA/Total: 2775 CCA
OPERATOR STATION
Seat
Degree of seat swivel, left hand/25 degree (angle)/Degree of seat swivel, right hand/25 degree (angle)/Air suspension
Instructional seat
Standard
Display
Standard: Generation 4 4600 CommandCenter: 25.4 cm/10 in./Optional: Extended monitor
Radio
Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna/Optional: Touchscreen radio
Inner cab volume
3.27 m3/115 cu ft
Cab glass area
6.64 m2/71.47 sq ft
DIMENSIONS
Wheelbase
2947 mm/116 in.
Overall length
With front weights, excluding hitch and coupler: 6965 mm/274.2 in./With front weights, including hitch and coupler: 7201 mm/283.5 in.
Drawbar clearance
381 mm/15 in.
Approximate shipping weight, Open;Cab
20,582 kg/45,375 lb
WEIGHT
Base machine weight
20,582 kg/45,375 lb
Maximum ballast level
24,494 kg/54,000 lb
CAPACITIES
Crankcase oil volume
64 L/16.9 U.S. gal.
Fuel tank
1324 L/350 U.S. gal.
Diesel exhaust fluid (DEF) tank
93.9 L/24.8 U.S. gal.
Cooling system
56.5 L/14.9 U.S. gal.
Transmission-hydraulic system
With 3-point hitch and PTO: 307.8 L/81.3 U.S. gal./Without 3-point hitch and PTO: 300 L/79.3 U.S. gal.
SERVICEABILITY
Interval for engine oil change
500 hours
Interval for hydraulic/transmission oil change
1500 hours
Interval for engine coolant change
6000 hours
PRECISION AG
Guidance
Integrated AutoTrac
Telematic
Available with JDLink hardware, activations, and Ethernet harnesses (availability dependent upon destination)
Remote diagnostics
Available with activated JDLink hardware and activations
The 9RT 570 tractor is part of the John Deere's 9RT Series. The 9RT 570 is a 4wd Track Tractors type, that is used often in Agriculture Tractors. A 329 horsepower engine powers the 9RT 570 tractor. This configuration provides better real-world usability.