Kubota L2650 Tractor (1993)

Manufacturer:Kubota

Price:N/A

Series:L50 Series

Model:L2650

Equipment Type: Compact Utility Tractors

Factory:

Full Specifications

KUBOTA L2650 POWER

Engine (gross): 29hp / 21.6kW
PTO (claimed): 23.5hp / 17.5kW

ENGINE DETAIL

Description: Kubota D1402-DI-AE diesel 3-cylinder liquid-cooled
Displacement: 85.1ci / 1.4L
Bore/Stroke: 3.3x3.2inches / 84x 81mm
Power (gross): 29hp / 21.6kW
Fuel system: direct injection
Rated RPM: 2600
Torque: 65.8lb-ft / 89.2Nm
Starter volts: 12
Coolant capacity: 4.9qts / 4.6L

ENGINE OIL

Oil capacity: 6 qts /5.7 L
Oil change: 200 h

KUBOTA L2650 ENGINE

Description: Kubota 1.4L 3-cyl diesel

TRANSMISSIONS OVERVIEW

Description: 8-speed mechanical shuttle 8-speed

TRANSMISSION 1

Type: mechanical shuttle
Gears: 8 forward and reverse
Description: Four gears (1-4) in two ranges (Low-High) with left-hand reverser lever. Gears shifted with right-hand gear shift on the console. Ranges shifted with left-hand lever beside seat. Shuttle shifting is synchronized, using the clutch and at low engine RPMs. Tractor must be stopped to shift ranges. The transmission may be equipped with a dual-stage clutch. This can be identified if the PTO shift has 1000 RPMs on the left, and 540 RPMs on the right

SPEEDS 1

Description: With 11.2-24 rear tires. Reverse speeds are about 10% slower than forward

TRANSMISSION 2

Transmission: Kubota Glide Shift
Gears: 8 forward and reverse
Clutch: dry disc
Oil capacity: 28.5qts / 27.0L
Description: Kubota Glide Shift (GST) allows for on-the-go shifting without using the clutch. Transmission should be shifted one gear at a time using the left-hand gear lever. Forward-reverse shuttle shifting may be done without the clutch

SPEEDS 2

Description: With 11.2-24 rear tires. Reverse speeds are about 10% slower than forward

MECHANICAL

Chassis: 4x2 2WD/4x4 MFWD 4WD (optional)
Differential lock: mechanical rear lock
Steering: power
Brakes: wet disc
Cab: Two-post ROPS. Optional canopy
Transmissions: 8-speed mechanical shuttle 8-speed

CAPACITY

Fuel: 7.7gal / 29.1L
Hydraulic system: 7.5gal / 28.4L

HYDRAULICS

Type: open center
Capacity: 7.5gal / 28.4L
Pressure: 2490psi / 171.7bar
Pump flow: 8.2gpm / 31.0lpm

TRACTOR HITCH

Rear Type: I
Control: position control with optional draft control
Rear lift (at ends): 2,645lbs / 1199kg
Rear lift (at 24: 1,985lbs / 900kg

POWER TAKE-OFF (PTO)

Rear PTO: transmssion/live (optional)
Rear RPM: 540/1000 (1.375)
Mid PTO: optional
Mid RPM: 1080 / 2000

KUBOTA L2650 TIRES

Standard tires (ag): Front: 4.00-15. Rear: 11.2-24 (2WD) Front: 7-16. Rear: 11.2-24 (4WD)

DIMENSIONS

Wheelbase: 64.6inches / 164cm
Length: 109.1inches / 277cm
Width: 51.4inches / 130cm
Height (steering wheel): 58.1inches / 147cm
Height (ROPS): 83.1inches / 211cm
Ground clearance: 13.6inches / 34cm
Front tread: 44.1inches / 112cm (4WD)
Rear tread: 40.6/44.3/48/51.4/55.1inches / 103/112/121/130 / 139cm

KUBOTA L2650 WEIGHT

2WD: 2,380lbs / 1079kg
4WD: 2,600lbs / 1179kg
GST: 2,655lbs / 1204kg
Max Drawbar: 1,100lbs / 498kg

DIMENSIONS & TIRES

Wheelbase: 64.6inches / 164cm
Weight: 2380 to 2655 pounds
Front tire: 4.00-15
Rear tire: 11.2-24 (2WD)

L2650 SERIAL NUMBERS

Location: Serial number decal on the left side of the L2650 tractor frame, above the front axle

ELECTRICAL

Ground: negative
Battery CCA: 490
Battery volts: 12

About Kubota Tractor

The L2650 tractor is part of the Kubota's L50 Series. The L2650 is classified as a Compact Utility Tractors and that is often used for Agriculture Tractors applications. The L2650 tractor is operated by a engine. This configuration improves usability in the real world setting.