McCormick Intl CX75 Tractor (2007)
Manufacturer:McCormick Intl
Price:N/A
Series:CX Series
Model:CX75
Equipment Type: Utility Tractors
Factory:Doncaster, England
Full Specifications
OCED TRACTOR TEST 1895 2
- Description
- 4.2L diesel 16-speed 4WD October 1998 - November 1998, Link: OCED Tractor Test 1895 file PTO performance Drawbar performance Gear 3L-DD used for power test Gear 1L-TA used for pull test
- Power at rated engine speed
- 59.7hp / 44.5kW
- Fuel use
- 4.0gal/hour / 15.1l/hour
- Power at rated PTO speed
- 62.1hp / 46.3kW
- Max power
- 50.2hp / 37.4kW
- Max pull
- 9,485lbs / 4302kg
MCCORMICK INTL CX75 POWER
- Engine (net)
- 73hp / 54.4kW
- Engine
- 73hp / 54.4kW
- PTO (claimed)
- 60hp / 44.7kW
- Drawbar (tested)
- 50.2hp / 37.4kW
- PTO (tested)
- 59.7hp / 44.5kW
ENGINES OVERVIEW
- Description
- Perkins 4.2L 4-cyl diesel Perkins 4.4L 4-cyl diesel
ENGINE DETAIL 1
- Description
- Perkins 1004.4 diesel 4-cylinder liquid-cooled The Tier I engine was used from the start of the CX 05 series in 2003 until spring of 2004
- Displacement
- 256.3ci / 4.2L
- Bore/Stroke
- 4.0551x5.00inches / 103x 127mm
- Emissions
- Tier I
- Rated Power (ECE R24)
- 73hp / 54.4kW
- Air cleaner
- dual paper elements
- Compression
- 18.5:1
- Rated RPM
- 2200
- Torque
- 199.9 lb-ft /271.1 Nm
- Starter volts
- 12
ENGINE DETAIL 2
- Description
- Perkins 1104 diesel 4-cylinder liquid-cooled inline The Tier II Perkins 1104 was introduced in 2004 with the same horsepower rating as the original engine
- Displacement
- 268.5ci / 4.4L
- Bore/Stroke
- 4.134x5.00inches / 105x 127mm
- Emissions
- Tier II
- Power
- 73hp / 54.4kW
- Rated RPM
- 2200
- Starter volts
- 12
MCCORMICK INTL CX75 ENGINES
- Description
- Perkins 4.2L 4-cyl diesel Perkins 4.4L 4-cyl diesel
TRANSMISSIONS OVERVIEW
- Description
- 24-speed partial power shift 8-speed synchro shuttle 16-speed partial power shift
TRANSMISSION 1
- Transmission
- Xtrashift
- Type
- partial power shift
- Gears
- 24 forward and reverse
- Clutch
- wet disc
- Description
- Eight gears with a three-range power shift for each gear. Optional creeper provides 36 gears forward and reverse
TRANSMISSION 2
- Type
- synchro shuttle
- Gears
- 8 forward and reverse
- Clutch
- dry disc
SPEEDS 1
- Description
- With 18.4-34 rear tires
TRANSMISSION 3
- Type
- partial power shift
- Gears
- 16 forward and 8 reverse
- Clutch
- dry disc
- Description
- Four gears in two ranges with two-speed power shift. Optional creeper provides 24-forward and 12-reverse
SPEEDS 2
- Description
- With 16.9R34 rear tires
MECHANICAL
- Chassis
- 4x2 2WD/4x4 MFWD 4WD
- Steering
- hydrostatic power
- Brakes
- hydraulic wet disc
- Cab
- ROPS. Cab optional
- Transmissions
- 24-speed partial power shift 8-speed synchro shuttle 16-speed partial power shift
CAPACITY
- Fuel
- 41gal / 155.2L
- Hydraulic system
- 9.1gal / 34.4L (2WD) 9.7gal / 36.7L (4WD)
HYDRAULICS
- Type
- open center
- Capacity
- 9.1gal / 34.4L (2WD) 9.7gal / 36.7L (4WD)
- Pump flow
- 15.85gpm / 60.0lpm
TRACTOR HITCH
- Rear lift
- 4,498lbs / 2040kg
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 540/1000
- Engine RPM
- 540@2000 / 1000@2000
MCCORMICK INTL CX75 TIRES
- Ag front
- 7.50-16/11.2R24 (4WD)
- Ag rear
- 16.9R34
DIMENSIONS
- Wheelbase
- 92.9inches / 235cm
- Length
- 165.75inches / 421cm
- Height
- 100.00inches / 254cm
- Weight
- 8312lbs / 3770kg
DIMENSIONS & TIRES
- Wheelbase
- 92.9inches / 235cm
- Weight
- 8312lbs / 3770kg
- Front tire
- 7.50-16
- Rear tire
- 16.9R34
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Charging amps
- 65
- Battery volts
- 12
About McCormick Intl Tractor
The McCormick Intl CX75 type tractor is part of the CX Series of tractors. The CX75 is classified as a Utility Tractors and that is often used for Agriculture Tractors purposes. The engine of the CX75 tractors is impressive. This setup offers a broader usability in the actual world.
