Oliver 1950-T Tractor (1969)
Manufacturer:Oliver
Price:N/A
Series:50 Series
Model:1950-T
Equipment Type: Row-Crop Tractors
Factory:
Full Specifications
NEBRASKA TRACTOR TEST 969 2
- Description
- Diesel Hydaul-Shift 2WD November 13 - 18, 1967 Link: Nebraska Tractor Test 969 file PTO performance Drawbar performance Gear 4-Under used for power test. Gear 1-Over used for pull test
- Power at rated engine speed
- 105.24hp / 78.5kW
- Fuel use
- 4.9gal/hour / 18.5l/hour
- Max power
- 70.07hp / 52.3kW
- Max pull
- 12,884lbs / 5844kg
NEBRASKA TRACTOR TEST 972 2
- Description
- Diesel Hydraul-Shift 4WD April 29 - May 7, 1968 Link: Nebraska Tractor Test 972 file PTO performance Drawbar performance Gear 3-Direct used for power test. Gear 1-Direct used for pull test
- Power at rated engine speed
- 105.11hp / 78.4kW
- Fuel use
- 6.6gal/hour / 25.0l/hour
- Max power
- 89.10hp / 66.4kW
- Max pull
- 17,692lbs / 8025kg
OLIVER 1950-T POWER
- Drawbar (tested)
- 89.10hp / 66.4kW
- PTO (tested)
- 105.24hp / 78.5kW
ENGINE DETAIL
- Description
- Waukesha-Oliver turbocharged diesel 6-cylinder liquid-cooled
- Displacement
- 310ci / 5.1L
- Bore/Stroke
- 3.875x4.375inches / 98x 111 mm
- Air cleaner
- dual dry pre-cleaners
- Compression
- 16:1
- Rated RPM
- 2400
- Starter volts
- 12
OLIVER 1950-T ENGINE
- Description
- Waukesha-Oliver 5.1L 6-cyl diesel
TRANSMISSION
- Transmission
- Hydraul-Shift
- Type
- partial power shift
- Gears
- 18 forward and 6 reverse
- Description
- The Hydraul-Shift provides an on-the-move power shift to a higher or lower range for each of the six forward, and two reverse, gears.
MECHANICAL
- Chassis
- 4x2 2WD/4x4 MFWD 4WD (optional)
- Steering
- hydraulic power
- Brakes
- differential disc
- Cab
- Open operator station. Optional cab.
- Transmission
- 18-speed partial power shift
TRACTOR HITCH
- Rear Type
- III/II
POWER TAKE-OFF (PTO)
- Rear RPM
- 1000
OLIVER 1950-T WEIGHT
- Operating
- 10,460lbs / 4744kg (2WD)/11,490lbs / 5211kg (4WD)
- Ballasted
- 20,220lbs / 9171kg (4WD)
DIMENSIONS & TIRES
- Weight
- 10460 to 11490 pounds
OLIVER 1810 LOADER
- Height (to pin)
- 168inches / 426cm
- Clearance, dumped bucket
- 140inches / 355cm
- Dump reach
- 36inches / 91cm
- Dump angle
- 45°
- Reach at ground
- 87inches / 220cm
- Breakout force (lift)
- 4500lbs / 2041kg
- Lift to full height (at pin)
- 2500lbs / 1134kg
- Bucket width
- 78inches / 198cm
1950-T SERIAL NUMBERS
- 1967
- 188974
- 1968
- 201931
- 1969
- 213376
- Final
- 218449
About Oliver Tractor
The 1950-T model tractor belongs to the Oliver 50 Series. The 1950-T is a Row-Crop Tractors type, that is used often in Agriculture Tractors. The engine of the 1950-T tractors is impressive. This setup offers a increased usability in the actual world.
