Steiger Bearcat III PT-225 Tractor (1981)
Manufacturer:Steiger
Price:66,000(USD)
Series:III Series
Model:Bearcat III PT-225
Equipment Type: Four-wheel Drive 4WD Tractors
Factory:Fargo, North Dakota, USA
Full Specifications
NEBRASKA TRACTOR TEST 1272 2
- Description
- Diesel 20-speed 4WD April 18 - May 10, 1978 Link: Nebraska Tractor Test 1272 file PTO performance Drawbar performance Gear 3LL used for power test
- Power at rated engine speed
- 105.69hp / 78.8kW
- Fuel use
- 14.3gal/hour / 54.1l/hour
- Max power
- 172.37hp / 128.5kW
- Max pull
- 29lbs / 13kg
STEIGER BEARCAT III PT-225 POWER
- Engine
- 225hp / 167.8kW
- PTO (claimed)
- 57hp / 42.5kW *540 RPM/105hp / 78.3kW *1000 RPM
- Drawbar (tested)
- 172.37hp / 128.5kW
- PTO (tested)
- 105.69hp / 78.8kW
ENGINE DETAIL
- Description
- Caterpillar 3306T turbocharged diesel 6-cylinder liquid-cooled inline
- Displacement
- 638ci / 10.5L
- Bore/Stroke
- 4.75x6.00inches / 121x 152mm
- Power
- 225hp / 167.8kW
- Compression
- 17.5:1
- Rated RPM
- 2200
- Idle RPM
- 830-2430
- Starter volts
- 12
- Oil capacity
- 32qts / 30.3L
- Coolant capacity
- 52qts / 49.2L
STEIGER BEARCAT III PT-225 ENGINE
- Description
- Caterpillar 10.5L 6-cyl diesel
TRANSMISSION
- Type
- constant mesh
- Gears
- 20 forward and 4 reverse
- Clutch
- hydraulic cerametallic dry disc
- Oil capacity
- 16qts / 15.1L *Transmission only/37qts / 35.0L *Transmission and transfer case
- Description
- Ten-speed transmission with two-speed transfer case
SPEEDS
- Description
- With 18.4x34 tires and S-34 axles
MECHANICAL
- Chassis
- 4x4 articulated 4WD
- Final drives
- outboard planetary
- Steering
- hydraulic power
- Brakes
- hydraulic disc
- Cab
- Safari Cab standard with air-conditioning
- Transmission
- 20-speed constant mesh
CAPACITY
- Fuel
- 225gal / 851.6L
- Hydraulic system
- 22gal / 83.3L
HYDRAULICS
- Type
- open center
- Capacity
- 22gal / 83.3L
- Pressure
- 2250psi / 155.1bar
- Valves
- 4 or 5
- Pump flow
- 20gpm / 75.7lpm
TRACTOR HITCH
- Rear Type
- III
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Clutch
- hydrostatic-drive
- Rear RPM
- 540/1000
STEIGER BEARCAT III PT-225 TIRES
- Ag front
- 23.1x30
- Ag rear
- 23.1x30 / 24.5x32 / 30.5x32 / 20.8x34 / 23.1x34 / 18.4x38 / 20.8x38
DIMENSIONS
- Wheelbase
- 132.5inches / 336cm
- Length
- 264.6inches / 672cm
- Width
- 120.2inches / 305cm *Minimum
- Height (exhaust)
- 155.7inches / 395cm
- Shiping weight
- 28295lbs / 12834kg
- Max weight
- 31000lbs / 14061kg
- Front axle
- Raba 598
- Rear axle
- Raba 598
DIMENSIONS & TIRES
- Wheelbase
- 132.5inches / 336cm
- Weight
- 28295lbs / 12834kg
- Front tire
- 18.4x34
- Rear tire
- 18.4x34
BEARCAT III PT-225 SERIAL NUMBERS
- 1977
- 141-00001
- 1978
- 141-00157
- 1979
- 141-00336
- 1980
- 141-00537
- 1981
- 141-00651
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Charging amps
- 90
- Charging volts
- 12
- Batteries
- 4
- Battery CCA
- 475
- Battery volts
- 12
About Steiger Tractor
The Bearcat III PT-225 type tractor is part of the Steiger III Series. The Bearcat III PT-225 is a Four-wheel Drive 4WD Tractors type, that is used often in Agriculture Tractors. The engine of the Bearcat III PT-225 tractors is impressive. This configuration improves usability in the real world setting.
Four-wheel Drive 4WD Tractors
