Steiger Bearcat III ST-225 Tractor (1983)
Manufacturer:Steiger
Price:66,000(USD)
Series:III Series
Model:Bearcat III ST-225
Equipment Type: Four-wheel Drive 4WD Tractors
Factory:Fargo, North Dakota, USA
Full Specifications
NEBRASKA TRACTOR TEST 1272 2
- Description
- Diesel 20-speed 4WD April 18 - May 10, 1978 Link: Nebraska Tractor Test 1272 file PTO performance Drawbar performance Gear 3LL used for power test
- Power at rated engine speed
- 105.69hp / 78.8kW
- Fuel use
- 14.3gal/hour / 54.1l/hour
- Max power
- 172.37hp / 128.5kW
- Max pull
- 29lbs / 13kg
NEBRASKA TRACTOR TEST 1414
- Description
- Diesel 20-speed 4WD October 19 - November 4, 1981 Link: Nebraska Tractor Test 1414 file Drawbar performance Gear 11 used for power test Gear 3 used for pull test
- Max power
- 184.69hp / 137.7kW
- Fuel use
- 12.0gal/hour / 45.4l/hour
- Max pull
- 28,805lbs / 13065kg
STEIGER BEARCAT III ST-225 POWER
- Engine
- 225hp / 167.8kW
- Drawbar (tested)
- 184.69hp / 137.7kW
- PTO (tested)
- 105.69hp / 78.8kW
ENGINE DETAIL
- Description
- Caterpillar 3306DIT turbocharged diesel 6-cylinder liquid-cooled inline
- Displacement
- 638ci / 10.5L
- Bore/Stroke
- 4.75x6.00inches / 121x 152mm
- Power
- 225hp / 167.8kW
- Compression
- 15:1
- Rated RPM
- 2100
- Torque
- 730lb-ft / 989.9Nm
- Torque RPM
- 1300
- Starter volts
- 12
- Oil capacity
- 29qts / 27.4L
- Coolant capacity
- 52qts / 49.2L
STEIGER BEARCAT III ST-225 ENGINE
- Description
- Caterpillar 10.5L 6-cyl diesel
- Fuel tank
- 267gal / 1010.6L
TRANSMISSION
- Transmission
- Dana-Spicer 1010-2A
- Gears
- 20 forward and 4 reverse
- Clutch
- 355.6mm hydraulic dry disc
- Description
- Ten-speed transmission with two-speed transfer case
MECHANICAL
- Chassis
- 4x4 articulated 4WD
- Final drives
- outboard planetary
- Steering
- hydrostatic power
- Brakes
- hydraulic dry disc
- Cab
- Safari Cab standard with heat and air-conditioning
- Transmission
- 20-speed
HYDRAULICS
- Type
- open center
- Pressure
- 2250psi / 155.1bar
- Valves
- 3 to 5
- Pump flow
- 30.8gpm / 116.6lpm
TRACTOR HITCH
- Rear Type
- 3
STEIGER BEARCAT III ST-225 TIRES
- Ag front
- 23.1-34
- Ag rear
- 23.1-34
DIMENSIONS
- Wheelbase
- 128inches / 325cm
- Length
- 252inches / 640cm
- Width
- 96inches / 243cm (tractor body)
- Shiping weight
- 25000lbs / 11340kg
- Max weight
- 34000lbs / 15422kg
STEIGER BEARCAT III ST-225 HEIGHT
- Hood
- 94.8inches / 240cm
- Cab
- 134.8inches / 342cm
- Exhaust
- 155.8inches / 395cm
DIMENSIONS & TIRES
- Wheelbase
- 128inches / 325cm
- Weight
- 25000lbs / 11340kg
- Front tire
- 23.1-34
- Rear tire
- 23.1-34
BEARCAT III ST-225 SERIAL NUMBERS
- 1980
- 109-00001
- 1981
- 109-00170
- 1982
- 109-01501
- 1983
- 109-02501
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Charging amps
- 90
- Battery volts
- 12
About Steiger Tractor
The Bearcat III ST-225 model tractor belongs to the III Series of tractors from Steiger. The Bearcat III ST-225 is a Four-wheel Drive 4WD Tractors type, that is used mainly in Agriculture Tractors. The engine of the Bearcat III ST-225 tractors is impressive. This arrangement is more practical in the actual world.
Four-wheel Drive 4WD Tractors
