Valmet 1102 Tractor (1980)
Manufacturer:Valmet
Price:N/A
Series:02 Series
Model:1102
Equipment Type: Row-Crop Tractors
Factory:
Full Specifications
VARIANTS
- 1102
- 8-speed
- 1103
- 16-speed
VALMET 1102 POWER
- Engine
- 115hp / 85.8kW
ENGINE DETAIL
- Description
- Valmet 411 BS turbocharged diesel 4-cylinder liquid-cooled
- Displacement
- 255.1ci / 4.2L
- Bore/Stroke
- 4.252x4.488inches / 108x 114mm
- Power
- 115hp / 85.8kW
- Rated RPM
- 2300
- Torque
- 259.6lb-ft / 352.0Nm
- Torque RPM
- 1500
- Starter volts
- 12
VALMET 1102 ENGINE
- Description
- Valmet 4.2L 4-cyl diesel
- Fuel tank
- 23.78gal / 90.0L
TRANSMISSIONS OVERVIEW
- Description
- 8-speed 16-speed
TRANSMISSION 1
- Gears
- 8 forward and 2 reverse
- Description
- Four gears (1-4) plus reverse (R) in two ranges (low/high)
TRANSMISSION 2
- Transmission
- Hi-Trac
- Gears
- 16 forward and 4 reverse
MECHANICAL
- Chassis
- 4x2 2WD/4x4 MFWD 4WD
- Steering
- power
- Transmissions
- 8-speed 16-speed
HYDRAULICS
- Pump flow
- 9.51gpm / 36.0lpm
TRACTOR HITCH
- Rear lift
- 6614lbs / 3000kg
POWER TAKE-OFF (PTO)
- Rear RPM
- 540/1000
VALMET 1102 TIRES
- Ag front
- 9.00-20/14.9-24 (4WD)
- Ag rear
- 18.4-34
DIMENSIONS
- Wheelbase
- 90.94inches / 230cm
- Length
- 164.2inches / 417cm
- Height
- 106.3inches / 270cm
- 2WD Weight
- 8,598lbs / 3900kg
- 4WD Weight
- 10340lbs / 4690kg
DIMENSIONS & TIRES
- Wheelbase
- 90.94inches / 230cm
- Weight
- 8598 to 10340 pounds
- Front tire
- 9.00-20
- Rear tire
- 18.4-34
VALMET J 81 LOADER
- Height (to pin)
- 141.7inches / 359cm
- Clearance, dumped bucket
- 111.4inches / 282cm
- Dump reach
- 35.4inches / 89cm
- Dump angle
- 40°
- Breakout force (bucket)
- 6969lbs / 3161kg
- Lift to full height (at pin)
- 5620lbs / 2549kg
ELECTRICAL
- Ground
- negative
- Battery volts
- 12
About Valmet Tractor
The 1102 model tractor belongs to the 02 Series of tractors from Valmet. The 1102 is a Row-Crop Tractors type, that is used often in Agriculture Tractors. The 1102 tractor is powered by a engine. This setup improves usability in the real world setting.
