Four gears (1-4) in two ranges (low/high) plus reverse range.
SPEEDS 1
Description
With 13.6-36 rear tires
TRANSMISSION 2
Type
creeper
Gears
8 forward and 4 reverse
Clutch
280mm dry disc
Description
Creeper range provides an addition four gears forward and reverse.
SPEEDS 2
Description
With 13.6-36 rear tires
MECHANICAL
Chassis
4x2 2WD/4x4 MFWD 4WD
Differential lock
mechanical rear
Steering
power
Brakes
wet disc
Cab
Cab standard.
Transmissions
8-speed/8-speed creeper
HYDRAULICS
Pump flow
10.3 gpm / 39.0 lpm
TRACTOR HITCH
Rear lift
5,291 lbs / 2399 kg / 5,512 lbs / 2500 kg *Increased lift capacity after 1989.
POWER TAKE-OFF (PTO)
Rear RPM
540
VALMET 405 TIRES
2WD Standard tires (ag)
Front: 10.00-16. Rear: 16.9-30
4WD Standard tires (ag)
Front: 11.2-24. Rear: 16.9-30
DIMENSIONS
2WD Wheelbase
83.2 inches / 211 cm
4WD Wheelbase
88.8 inches / 225 cm
2WD Length
146.1 inches / 371 cm
4WD Length
151.6 inches / 385 cm
Width
79.9 inches / 202 cm
2WD Clearance (front axle)
19.9 inches / 50 cm
4WD Clearance (front axle)
16 inches / 40 cm
VALMET 405 WEIGHT
2WD
6085 lbs / 2760 kg
4WD
6570 lbs / 2980 kg
2WD Max front axle
6614 lbs / 3000 kg
4WD Max front axle
4519 lbs / 2049 kg
Max rear axle
8378 lbs / 3800 kg
VALMET 405 HEIGHT
2WD Cab
101 inches / 256 cm
4WD Cab
100.8 inches / 256 cm
Exhaust
104 inches / 264 cm
DIMENSIONS & TIRES
2WD Wheelbase
83.2 inches / 211 cm
4WD Wheelbase
88.8 inches / 225 cm
Weight
6085 to 6570 pounds
Front tire
10.00-16
2WD Rear tire
16.9-30
ELECTRICAL
Ground
negative
Charging system
alternator
Charging amps
45
Battery volts
12
About Valmet Tractor
The 405 tractor is part of the Valmet's 05 Series. The 405 is a Utility Tractors type, that is used often in Agriculture Tractors. The engine of the 405 tractor delivers. This arrangement is more practical in the actual world.