John Deere 5075GL Tractor (2020)

Manufacturer:John Deere

Price:62,477(USD)

Series:Low Profile Tractors

Model:5075GL

Equipment Type: Specialty Tractors

Factory:Waterloo, Iowa, USA

Full Specifications

KEY SPECS

Engine description: John Deere PowerTech™ 13.6L (B20 diesel compatible)
Engine displacement: 13.6 L827 cu in.
Rated engine power: 382 kW520 hp
Maximum engine power: 421 kW572 hp
Rated PTO power (hp SAE): 245 kW329 hp
Transmission type: John Deere e18™ 18-speed PowerShift™ with Efficiency Manager™: 40 km/h25 mph
Hydraulic pump rated output: Standard: 208 L/min55 gpmOptional: 416 L/min110 gpm
Rear hitch category (SAE designation): Category 4N/N: 6804 kg15,000 lbCategory 4N/N: 9072 kg20,000 lb"
Base machine weight: 20,582 kg45,375 lb"

ENGINE SPECIFICATIONS

Description: John Deere PowerTech 13.6L (B20 diesel compatible)
Engine type: Diesel, inline, 6-cylinder, wet-sleeve cylinder liners with four valves in-head"
Rated speed: 2100 rpm
Aspiration: Dual series turbocharger with fixed geometry first stage and wastegated second stage; air-to-air aftercooling and cooled exhaust gas recirculation (EGR)
Emission level: Final Tier 4 (FT4)
After treatment type: Diesel oxidation catalyst (DOC)/selective catalytic reduction (SCR)
Displacement: 13.6 L827 cu in.

ENGINE PERFORMANCE

Rated power: 382 kW520 hp
Rated PTO power (hp SAE): 245 kW329 hp
Power boost: 10 percent
Maximum engine power: 421 kW572 hp
Engine peak torque: At 1600 rpm: 2400 Nm 1770 lb-ft
PTO torque rise: 38 percent

TRANSMISSION

Type: John Deere e18 18-speed PowerShift with Efficiency Manager: 40 km/h25 mph

HYDRAULIC SYSTEM

Type: Closed-center, pressure-and-flow compensated"
Pump rated output: Standard: 208 L/min55 gpmOptional: 416 L/min110 gpm
Available flow at a single rear SCV: 1.3-cm (1/2-in.) couplers: 132 L/min35 gpm1.9-cm (3/4-in.) couplers: 159 L/min42 gpm
Number of rear selective control valves (SCVs): Four to eight factory or field installedBase: four 1.3-cm (1/2-in.) couplersOptional: five to six 1.3-cm (1/2-in.) couplers factory installedOptional: three 1.9-cm (3/4-in.) couplers plus five 1.3-cm (1/2-in.) couplers factory installed
SCV control: Electronic

REAR HITCH

Hitch category (SAE designation): Category 4N/N: 6804 kg15,000 lbCategory 4N/N: 9072 kg20,000 lb"
Maximum lift capacity behind lift points: Category 4N/4: 9072 kg20,000 lb"
Sensing type: Electrohydraulic with draft sensing

DRAWBAR

Drawbar category: Standard: Category 5 with heavy-duty drawbar supportOptional: Category 5
Maximum vertical load: 5440 kg12,000 lb"

REAR POWER TAKE-OFF (PTO)

Type: Independent44 mm (1.75 in.) 20-spline, 1000 rpm"
PTO actuation: Electrohydraulic

REAR AXLE

Final drive type: Outboard planetary

TRACKS

Drive type: Camso® 4500 and 6500 General Ag Series - friction drive track belts
Track width: Standard: 762 mm30 in.Optional: 914 mm36 in.
Midrollers: Four

STEERING

Type: Heavy-duty steering pump: 130 cc7.9 cu in.

ELECTRICAL SYSTEM

Alternator size: Standard: 250 ampOptional: 330 amp
Battery options: 12 V
Working lights: Standard: 18 halogenOptional: 18 or 24 LED plus 8 LED conveninence lights
Type of bulb in headlight (Halogen, Zenon, LED): Standard: halogen, 65 WOptional: LED"
Total cold cranking amps: 3 x 925 CCATotal: 2775 CCA

OPERATOR STATION

Seat: Degree of seat swivel, left hand25 degree (angle)Degree of seat swivel, right hand40 degree (angle)Air suspension"
Instructional seat: Standard
Display: Standard: Generation 4 4600 CommandCenter™: 25.4 cm10 in.Optional: Extended monitor
Radio: Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antennaOptional: Touchscreen radio"
Inner cab volume: 3.27 m3115 cu ft
Cab glass area: 6.64 m271.47 sq ft

DIMENSIONS

Wheelbase: 2947 mm116 in.
Overall length: With front weights, excluding hitch and coupler: 6965 mm274.2 in.With front weights, including hitch and coupler: 7201 mm283.5 in."
Drawbar clearance: 381 mm15 in.
Approximate shipping weight, Open;Cab: 20,582 kg45,375 lb"

WEIGHT

Base machine weight: 20,582 kg45,375 lb"
Maximum ballast level: 24,494 kg54,000 lb"

CAPACITIES

Crankcase oil volume: 64 L16.9 U.S. gal.
Fuel tank: 1324 L350 U.S. gal.
Diesel exhaust fluid (DEF) tank: 93.9 L24.8 U.S. gal.
Cooling system: 56.5 L14.9 U.S. gal.
Transmission-hydraulic system: With 3-point hitch and PTO: 307.8 L81.3 U.S. gal.Without 3-point hitch and PTO: 300 L79.3 U.S. gal.

SERVICEABILITY

Interval for engine oil change: 500 hours
Interval for hydraulic/transmission oil change: 1500 hours
Interval for engine coolant change: 6000 hours

PRECISION AG

Guidance: Integrated AutoTrac™
Telematic: Available with JDLink™ hardware, activations, and Ethernet harnesses (availability dependent upon destination)"
Remote diagnostics: Available with activated JDLink hardware and activations

MISCELLANEOUS

Country of manufacture: USA

ADDITIONAL INFORMATION

Date collected: 1 March 2021

About John Deere Tractor

The 5075GL model tractor belongs to the Low Profile Tractors of tractors from John Deere. The 5075GL is a Specialty Tractors type, which is used mainly in Agriculture Tractors. A 329 horsepower engine powers the 5075GL tractor. This setup offers a increased usability in the actual world.