Case 2094 Tractor (1984)

Manufacturer:Case

Price:43,400(USD)

Series:94 Series

Model:2094

Equipment Type: Row-Crop Tractors

Factory:Racine, Wisconsin, USA

Full Specifications

NEBRASKA TRACTOR TEST 1525 2

Description: Diesel 12-speed 2WD May 30 - June 16, 1984 Link: Nebraska Tractor Test 1525 file PTO performance Drawbar performance Gear 3-2 used for power test Gear 2-1 used for pull test.
Power at rated engine speed: 111.50hp / 83.1kW
Fuel use: 7.1gal/hour / 26.9l/hour
Max power: 98.66hp / 73.6kW
Max pull: 11,910lbs / 5402kg

J.I. CASE 2094 POWER

Engine: 127hp / 94.7kW
Drawbar (claimed): 100hp / 74.6kW
PTO (claimed): 110hp / 82.0kW
Drawbar (tested): 98.66hp / 73.6kW
PTO (tested): 111.50hp / 83.1kW

ENGINE DETAIL

Description: Case diesel 6-cylinder liquid-cooled
Displacement: 504ci / 8.3L
Bore/Stroke: 4.625x5.00inches / 117x 127 mm
Power: 127hp / 94.7kW
Compression: 16:1
Rated RPM: 2100
Torque: 366.6 lb-ft /497.1 Nm
Torque RPM: 1575
Starter volts: 12
Oil capacity: 19qts / 18.0L
Coolant capacity: 38qts / 36.0L

J.I. CASE 2094 ENGINE

Description: Case 8.3L 6-cyl diesel

TRANSMISSION

Type: three-speed power shift
Gears: 12 forward and 3 reverse
Oil capacity: 100qts / 94.6L
Description: Three power-shift gears (1-3), plus reverse, in four ranges (1-4). Reverse does not function in fourth range.

SPEEDS

Description: With 18.4x38 rear tires

MECHANICAL

Chassis: 4x2 2WD/4x4 MFWD 4WD
Steering: power
Brakes: wet disc
Cab: Four-post ROPS. Silent Guardian cab optional with air-conditioning.
Transmission: 12-speed three-speed power shift

CAPACITY

Fuel: 65gal / 246.0L/25gal / 94.6L (optional auxiliary tank)
Hydraulic system: 25gal / 94.6L

HYDRAULICS

Type: closed center
Capacity: 25gal / 94.6L
Pressure: 2250psi / 155.1bar
Valves: 2 to 4*3 only with 4WD
Pump flow: 23gpm / 87.1lpm
Steering flow: 8 gpm /30.3 lpm
Steering press.: 2000psi / 137.9bar

TRACTOR HITCH

Rear Type: II
Rear lift (at 24: 6,600lbs / 2993kg

POWER TAKE-OFF (PTO)

Rear PTO: independent
Clutch: hydraulic
Rear RPM: 540/1000

J.I. CASE 2094 TIRES

Ag front: 14Lx16
Ag rear: 23.1x34/16.9x38/20.8x38

DIMENSIONS

Wheelbase: 104inches / 264cm/110inches / 279cm long wheelbase.
Width: 96inches / 243cm/120inches / 304cm (optional axle)
Rear axle: Bar: 3.5 by 120inches / 88by 3048 mm
Rear tread: 60 to 112inches / 152to 284 cm

J.I. CASE 2094 WEIGHT

Shipping: 10,950lbs / 4966kg
Operating: 14,190lbs / 6436kg
Max capacity: 15,600lbs / 7076kg (2WD)/16,600lbs / 7529kg (4WD)
Max front axle: 12,125lbs / 5499kg
Max rear axle: 13,000lbs / 5896kg

DIMENSIONS & TIRES

Wheelbase: 104inches / 264cm/110inches / 279cm long wheelbase.
Weight: 10950 to 14190 pounds
Front tire: 11.00x16
Rear tire: 18.4x38

2094 SERIAL NUMBERS

Location: Inside cab or on right-front frame
1984: 9931800

ELECTRICAL

Ground: negative
Charging system: alternator
Charging amps: 72/105
Battery volts: 12

About Case Tractor

The 2094 model tractor belongs to the 94 Series of tractors from Case. The 2094 is classified as a Row-Crop Tractors and that is primarily used for Agriculture Tractors applications. The engine of the 2094 tractors is impressive. This setup offers a enhanced usability in the actual world.