CaseIH Puma 200 Tractor (2022)

Manufacturer:CaseIH

Price:N/A

Series:Puma Series

Model:Puma 200

Equipment Type: Row-Crop Tractors

Factory:Basildon, England

Full Specifications

OCED TRACTOR TEST 2615 2

Description
Diesel 19-speed 4WD October 2010 - April 2011, Link: OCED Tractor Test 2615 file PTO performance Drawbar performance Gear 10 used for power test Gear 7 used for pull test
Max power
155.2hp / 115.7kW
Fuel use
10.0gal/hour / 37.9l/hour
Power at rated engine speed
177.0hp / 132.0kW
Power at rated PTO speed
198.5hp / 148.0kW
Max pull
16045lbs / 7278kg

CASEIH PUMA 200 POWER

Engine (gross)
200hp / 149.1kW
Engine (max)
250hp / 186.4kW
PTO (claimed)
165hp / 123.0kW
Drawbar (tested)
155.2hp / 115.7kW
PTO (tested)
198.7hp / 148.2kW

ENGINE DETAIL

Description
FPT turbocharged diesel 6-cylinder 24-valve liquid-cooled
Displacement
410.6ci / 6.7L
Bore/Stroke
4.094x5.197inches / 104x 132mm
Emissions
Interim Tier 4
Emission control
selective catalytic reduction (SCR)
Rated Power (ECE R120)
200hp / 149.1kW
Maximum Power (ECE R120)
250hp / 186.4kW
Air cleaner
dual paper elements
Rated RPM
2200
Starter
electric
Starter volts
12
Oil capacity
16qts / 15.1L

CASEIH PUMA 200 ENGINE

Description
FPT 6.7L 6-cyl diesel

TRANSMISSIONS OVERVIEW

Description
18-speed full power shift 19-speed full power shift continuously variable transmission (CVT)

TRANSMISSION 1

Type
full power shift
Gears
18 forward and 6 reverse
Clutch
electro-hydraulic wet disc

TRANSMISSION 2

Transmission
EconoGear
Type
full power shift
Gears
19 forward and 6 reverse
Clutch
electro-hydraulic wet disc
Description
Adds transport gear to the power shift, providing road speed at reduced engine RPMs

TRANSMISSION 3

Type
continuously variable transmission (CVT)
Gears
infinite forward and reverse

MECHANICAL

Chassis
4x4 MFWD 4WD
Steering
hydrostatic power
Cab
Cab standard. Optional cab suspension
Transmissions
18-speed full power shift 19-speed full power shift continuously variable transmission (CVT)

CAPACITY

Fuel
104gal / 393.6L
Exhaust fluid (DEF)
13.2gal / 50.0L
Hydraulic system
22gal / 83.3L

HYDRAULICS

Type
closed center pressure flow compensating (PFC)
Capacity
22gal / 83.3L
Rear valves
3 to 4 (mechanical) / 3 to 5 (electronic)
Pump flow
32gpm / 121.1lpm (powershift) 35gpm / 132.5lpm (CVT/opt-PS) 40gpm / 151.4lpm (CVT opt)
Total flow
49gpm / 185.5lpm (powershift) 52gpm / 196.8lpm (CVT/opt-PS) 57gpm / 215.7lpm (CVT opt)
Steering flow
17gpm / 64.3lpm

TRACTOR HITCH

Rear Type
2/3N
Rear lift
10,200lbs / 4626kg 13,400lbs / 6078kg (optional)

POWER TAKE-OFF (PTO)

Rear PTO
independent
Rear RPM
540/1000 (1.375)/1000 (1.75)/1000 / 1000E

DIMENSIONS

Wheelbase
113.6inches / 288cm
Operating weight
18940lbs / 8591kg
Rear axle
Bar: 4.125 by 119inches / 104by 3022mm
Front tread
60 to 88inches / 152to 223cm

DIMENSIONS & TIRES

Wheelbase
113.6inches / 288cm
Weight
18940lbs / 8591kg

CASE IH L770 LOADER

Height (to pin)
178inches / 452cm
Clearance, dumped bucket
140inches / 355cm
Dump reach
29inches / 73cm
Dump angle
55°
Reach at ground
113inches / 287cm
Rollback angle
43°
Breakout force (at pin)
6650lbs / 3016kg
Breakout force (at 800mm)
5800lbs / 2630kg
Lift to full height (at pin)
5450lbs / 2472kg
Lift to full height (at 800mm)
4900lbs / 2222kg

CASE IH L780 LOADER

Height (to pin)
194inches / 492cm
Clearance, dumped bucket
157inches / 398cm
Dump reach
29inches / 73cm
Dump angle
52°
Reach at ground
117inches / 297cm
Rollback angle
45°
Breakout force (at pin)
7408lbs / 3360kg
Breakout force (at 800mm)
9237lbs / 4189kg
Lift to full height (at pin)
7408lbs / 3360kg
Lift to full height (at 800mm)
6768lbs / 3069kg

ELECTRICAL

Ground
negative
Charging system
alternator
Charging amps
150/200
Battery CCA
1300
Battery volts
12

About CaseIH Tractor

The CaseIH Puma 200 tractor is part of the company's Puma Series. The Puma 200 is a Row-Crop Tractors type, which is used mainly in Agriculture Tractors. The Puma 200 tractor is equipped by a engine. This configuration gives better real-world usability.

Also See