John Deere 3035D Tractor (None)
Manufacturer:John Deere
Price:21,323(USD)
Series:3 Series
Model:3035D
Equipment Type: Compact Tractors
Factory:None
Full Specifications
KEY SPECS
- Engine power (gross)
- 25.5 kW/34.2 hp
- Power take-off (PTO) power
- 22.7 kW/30.4 hp
- Steering hydraulics
- 16.8 L/min/4.4 gpm
- Implement hydraulics
- 22.4 L/min/5.9 gpm
- Hitch type
- Category 1
- Lift capacity, 24-in. behind link arms
- 944 kg/2081.2 lb
- Standard transmission; forward/reverse
- 8F/8R synchromesh shuttle shift gear transmission
- Cruise control
- No
- Approximate shipping weight (open-station; cab)
- Open operator station (OOS): 1275 kg/2811 lb/Cab: Not applicable
- Wheelbase
- 1574 mm/62 in.
ENGINE
- Manufacturer
- Yanmar®
- Engine model
- 3TNV88C-KJPT
- Engine power (gross)
- 25.5 kW/34.2 hp
- Power take-off (PTO) power
- 22.7 kW/30.4 hp
- Rated engine speed
- 2800 rpm
- Injection pump type
- High pressure common rail direct injection
- Aspiration
- Natural
- Emissions compliance
- Final Tier 4
- Cylinders/displacement
- 3 / 1.64 L/3 / 100.2 cu in.
- Number of cylinders
- Three
- Cylinder liners
- Cast-in-block
- Bore and stroke
- 88 x 90 mm/3.46 x 3.54 in.
- Compression ratio
- 19.1:1
- Lubrication
- Pressurized
- Cooling system
- Liquid
- Air cleaner
- Dual element
- Engine torque at rated speed
- 87 Nm/64.2 lb-ft
- Fuel tank capacity
- 36.7 L/9.7 U.S. gal.
ELECTRICAL
- Battery size
- 600 CCA
- Alternator (12-V)
- 55 amp
- Starter size
- 1.4 kW/1.9 hp
FUEL SYSTEM
- Type
- High pressure common rail direct injection
TRANSMISSION
- Standard transmission; forward/reverse
- 8F/8R synchromesh shuttle shift gear transmission
- Left-hand reverser
- Yes
- Transmission gear ranges
- Four gears and two ranges
- Final drive
- Spur gear
- Brakes
- Wet disk
- Steering
- Power steering
- Axle capacity
- Front/880 kg/1940 lb/Rear/1600 kg/3527 lb/
- Creeper
- No
- Cruise control
- No
- Differential lock
- Yes
HYDRAULICS
- Type
- Open center
- Pump rated output
- Steering/16.8 L/min/4.4 gpm/Implement/22.4 L/min/5.9 gpm/39.2 L/min/10.3 gpm
- Pump type
- Single gear
- Maximum operating pressure
- 172 bar/2495 psi
- Draft control sensing
- Position control
- Remote control valves available
- Up to two (optional)
3-POINT HITCH
- Type
- Category 1
- Lift capacity, 24-in. behind link arms
- 944 kg/2081.2 lb
POWER TAKE-OFF (PTO)
- Standard
- At 2400 rpm: 540 rpm
- Control
- Mechanical
- Clutch
- Transmission
- Brake (for mid and rear PTO)
- Wet disk
FLUID CAPACITIES
- Crankcase with filter
- 4.5 L/4.8 qt
- Transmission and hydraulic system
- 33 L/34.8 qt
FINAL DRIVE
- Type
- Spur gear
OPERATOR STATION
- Rollover protective structure
- Type/Foldable/ASABE S478
- Platform - flat/straddle
- Straddle
- Gear shift location - console/floor
- Right-hand side
DIMENSIONS
- Wheelbase
- 1574 mm/62 in.
- Front axle clearance
- Minimum: 331 mm/13 in./Maximum: 353 mm/13.9 in.
- Turning radius with brakes
- 1.63 m/5.3 ft
- Approximate shipping weight (open-station; cab)
- OOS: 1275 kg/2811 lb/Cab: Not applicable
TIRES
- Front
- R1 Bar: 7-14/R3 Turf: 27x8.5-15/R4 Industrial: 25x8.5-14
- Rear
- R1 Bar: 11.2-24/R3 Turf: 41x14-20/R4 Industrial: 15-19.5
MISCELLANEOUS
- Toolbox
- Yes
- Tilt steering wheel
- No
- 12-V Outlet
- No
About John Deere Tractor
The John Deere 3035D tractor is part of the 9R tractor series. The 3035D is a type of Compact Tractors and that is mostly used for Agriculture Tractors purposes. The 3035D tractor is operated by a 30.4 horsepower engine. This configuration optimizes real-world usefulness.
