John Deere 4030 Tractor (1977)
Manufacturer:John Deere
Price:17,721(USD)
Series:Generation II Series
Model:4030
Equipment Type: Row-Crop Tractors
Factory:Waterloo, Iowa, USA
Full Specifications
NEBRASKA TRACTOR TEST 1111 2
- Description
- Diesel Quad-Range 2WD October 9 - 13, 1972 Link: Nebraska Tractor Test 1111 file PTO performance Drawbar performance
- Power at rated engine speed
- 80.33hp / 59.9kW
- Fuel use
- 5.7gal/hour / 21.6l/hour
- Power at rated PTO speed
- 77.72hp / 58.0kW
- Max power
- 67.03hp / 50.0kW
- Max pull
- 7,512lbs / 3407kg
JOHN DEERE 4030 POWER
- PTO (claimed)
- 80hp / 59.7kW
- Drawbar (tested)
- 67.03hp / 50.0kW
- PTO (tested)
- 80.33hp / 59.9kW
ENGINES OVERVIEW
- Description
- John Deere 5.4L 6-cyl diesel John Deere 5.0L 6-cyl gasoline
ENGINE DETAIL 1
- Description
- John Deere diesel 6-cylinder liquid-cooled inline horizontal-shaft
- Displacement
- 329ci / 5.4L
- Bore/Stroke
- 4.02x4.33inches / 102x 110mm
- Air cleaner
- dry with secondary element
- Pre-heating
- ether injection coolant heater
- Compression
- 16.2:1
- Rated RPM
- 2500
- Idle RPM
- 800-2660
- Operating RPM
- 1500-2500
- Starter
- electric
- Starter volts
- 12
- Oil capacity
- 17qts / 16.1L
- Coolant capacity
- 22qts / 20.8L
ENGINE DETAIL 2
- Description
- John Deere gasoline 6-cylinder liquid-cooled, The gasoline engine was available only during the 1973 model year on the 4030
- Displacement
- 303ci / 5.0L
- Bore/Stroke
- 3.86x4.33inches / 98x 110mm
- Starter
- electric
- Starter volts
- 12
JOHN DEERE 4030 ENGINES
- Description
- John Deere 5.4L 6-cyl diesel John Deere 5.0L 6-cyl gasoline
TRANSMISSIONS OVERVIEW
- Description
- 8-speed partially synchronized 16-speed partial power shift 13-speed creeper
TRANSMISSION 1
- Transmission
- John Deere Syncro-Range
- Type
- partially synchronized
- Gears
- 8 forward and 2 reverse
- Clutch
- hydraulic wet disc
- Oil capacity
- 64qts / 60.6L
- Description
- Four shift stations with two gears each, plus reverse gear in the first two shift stations. Tractor must be stopped, and clutch used, to shift between stations. Once in a shift station the tractor may be shifted on the move, using the clutch, between the gears in that station
SPEEDS
- Description
- With 18.4-38 rear tires
TRANSMISSION 2
- Transmission
- John Deere Quad-Range
- Type
- partial power shift
- Gears
- 16 forward and 6 reverse
- Clutch
- hydraulic wet disc
- Oil capacity
- 64qts / 60.6L
- Description
- Four gears (1-4) in four ranges (A-D). Power shift between gears 1-2 and 3-4 in each range with a synchronized shift (using clutch) between 2-3. Tractor must be stopped to shift range
TRANSMISSION 3
- Transmission
- Syncro-Range Creeper
- Type
- creeper
- Gears
- 13 forward and 4 reverse
- Description
- Optional creeper range adds additional speeds to the first five gears of the Syncro-Range transmission. An interlock prevents shifting into gears 6 through 8 while the creeper is engaged
MECHANICAL
- Chassis
- 4x2 2WD
- Final drives
- planetary
- Differential lock
- hydro-mechanical rear
- Steering
- power
- Brakes
- differential hydraulic wet disc
- Cab
- Open operator station. Optional four-post Roll-Gard ROPS. Optional Sound-Gard cab with heat and air-conditioning available
- Transmissions
- 8-speed partially synchronized 16-speed partial power shift 13-speed creeper
CAPACITY
- Fuel
- 35gal / 132.5L
- Hydraulic system
- 13gal / 49.2L
HYDRAULICS
- Type
- closed center
- Capacity
- 13gal / 49.2L
- Valves
- 1 to 3
- Pump flow
- 23gpm / 87.1lpm
TRACTOR HITCH
- Rear Type
- II
POWER TAKE-OFF (PTO)
- Rear PTO
- independent
- Rear RPM
- 540/1000 (1.375)
JOHN DEERE 4030 TIRES
- Ag front
- 7.5L-15
- Ag rear
- 23.1-26 / 18.4-30 / 18.4-34 / 16.9-34 / 13.6-38
DIMENSIONS
- Wheelbase
- 101inches / 256cm
- Length
- 154.4inches / 392cm
- Height (steering wheel)
- 84.5inches / 214cm
- Height (cab)
- 107.7inches / 273cm
- Clearance (front axle)
- 21.95inches / 55cm
- Clearance (rear axle)
- 27.24inches / 69cm
- Clearance (drawbar)
- 14.1inches / 35cm
- Rear axle
- Rack-and-pinion: 3.125 by 112inches / 79by 2844mm
- Front tread
- 48 to 68inches / 121to 172cm
- Rear tread
- 61 to 117inches / 154to 297cm
JOHN DEERE 4030 WEIGHT
- Shipping
- 7340lbs / 3329kg
- Operating
- 9180lbs / 4164kg
- Ballasted
- 10150lbs / 4604kg
DIMENSIONS & TIRES
- Wheelbase
- 101inches / 256cm
- Weight
- 7340 to 9180 pounds
- Front tire
- 6.00-16
- Rear tire
- 15.5-38
JOHN DEERE 148 LOADER
- Loader weight
- 1350lbs / 612kg
- Height (to pin)
- 126inches / 320cm
- Clearance, dumped bucket
- 102inches / 259cm
- Dump reach
- 32inches / 81cm
- Dump angle
- 38°
- Clearance, level bucket
- 121inches / 307cm
- Rollback angle
- 11°
- Breakout force (lift)
- 4700lbs / 2131kg
- Lift to full height (at pin)
- 3100lbs / 1406kg
- Bucket capacity
- 0.5cu yd / 0.4cu m / 0.6cu yd / 0.5cu m / 0.8cu yd / 0.6cu m / 0.9cu yd / 0.7cu m
- Bucket width
- 60inches / 152cm 72inches / 182cm 84inches / 213cm 96inches / 243cm
4030 SERIAL NUMBERS
- Location
- Serial number plate on the rear of the John Deere 4030, above the PTO shaft
- 1973
- 1000
- 1974
- 6700
- 1975
- 10153
- 1976
- 13022
- 1977
- 15417
- Final
- 16689
ELECTRICAL
- Ground
- negative
- Charging system
- alternator
- Batteries
- 2
- Battery volts
- 6
About John Deere Tractor
The 4030 model tractor belongs to the Generation II Series of tractors from John Deere. The 4030 is classified as a Row-Crop Tractors and that is often used for Agriculture Tractors activities. A engine powers the 4030 tractor. This arrangement improves usability in the real world scenario.
